P
PrintablesPrintzee
Mini Articulated Dragon (Magnet/Keychain)
Magnet Size 6x2mm * for commercial license, Please visit my Patreon
- Pobrania
- 91 066
- Polubienia
- 9139
- Ocena
- 4,93
Wyniki wyszukiwania: magnet
Liczymy pasujące modele…
P
PrintablesRomeoZbughin
AS5600 magnetic encoder mount case
Mount for magnetic encoder ,module with AS5600 , use a 608 bearing .
- Pobrania
- 461
- Polubienia
- 10
- Ocena
- 0
P
PrintablesYuri Y
Magnetic chessboard
Neodymium magnets size 10mm (width) 1.5mm (height) Add a pause on the desired layer when printing white and black cells to install the magnet. When printing numbers and letters, add compensation (x, y) -0.1 The number of parts that need…
- Pobrania
- 118
- Polubienia
- 29
- Ocena
- 5
P
PrintablesJakob127
Magnetic Architecture Blocks
ADD PAUSE PRINT TO INSERT MAGNETS! I created these bricks to make it easy to build cool structures without having any visible connectors. The design also allows creating non-cube blocks like stairs. Since it's 3D printed, it can also…
- Pobrania
- 117
- Polubienia
- 27
- Ocena
- 0
P
PrintablesGodzilla Guy
Interlocking Socket Rail 3/8 (Added Magnetic)
This is a simple socket set rail that I made for 3/8in drive sockets. It can interlock end to end. The spots for sockets are farther apart the farther down it goes. This fits 8 sockets, ~8-16mm is the best fitting from my experience.…
- Pobrania
- 86
- Polubienia
- 10
- Ocena
- 0
P
Printablescharlescho
Magnetic Stud Finder
I lost my CH Hansen magnetic stud finder so I made this. I used a total of 4 20x10x3mm magnets and inserted them into the print with a pause in the gcode. This stud finder also features a window so that you can mark a center line. EDIT: I…
- Pobrania
- 59
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJoe
Magnetic removeable scrap/filament/failed prints bin CR6SE
I made this for my CR6-SE so I could put all the skirts, purge lines and filament scraps in - so I don't have to go to a bin every time. The base slides into the 2 slots in the 40mm x 40mm extrusion on the base of the printer. 10 holes (5…
- Pobrania
- 52
- Polubienia
- 6
- Ocena
- 0
P
PrintablesLinus045
SplitKB Aurora Sofle v2 Magnetic Case
Based on my initial top and bottom plate I added a new case that encapsulates the pcb and controller to give them better protection. See original top/bottom plates here:…
- Pobrania
- 50
- Polubienia
- 7
- Ocena
- 0
P
PrintablesOdbix
Small magnetic foldable wall hook
This model uses one M3 20mm long bolt to hold the hook in place. You will also need a M3 thread insert and two small cylindrical magnets of Ø6mm .
- Pobrania
- 50
- Polubienia
- 18
- Ocena
- 0
P
PrintablesMAKelly2
Jellyfish Magnet
Includes pause to be able to insert the 8x3 magnets.
- Pobrania
- 48
- Polubienia
- 9
- Ocena
- 0
P
PrintablesKenTravels
Magnetic OTF Key Stash
I had an idea for a magnetic key keeper that I could deploy out the front. It's not 100% perfect, but it works. *Work in progress
- Pobrania
- 40
- Polubienia
- 16
- Ocena
- 0
P
PrintablesScorch1262
Abluft-Magnetverschluss MK2
Abluftschlauch: https://www.bauhaus.info/lueftungszubehoer/air-circle-pvc-schlauch/p/13506381 Magneten: https://www.amazon.de/gp/product/B06X977K8L/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1 Category: DIY
- Pobrania
- 38
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDadoVodaLAB
Prusa Core One USB Protector – Rectangular Magnet Remix
This is a remix of the original “Prusa Core One USB Support and Protector” by @cpunut_1794213. The original design uses six round magnets. In this version, I redesigned the internal cavities to accommodate two rectangular magnets (20 x 8…
- Pobrania
- 37
- Polubienia
- 8
- Ocena
- 5
P
PrintablesLextone
Soft Magnetic Quick Change Jaws
Universal fitting soft jaws for your vise. Each piece is press fitted with a standard 8mm round magnet. A little dab of glue can be used, but not necessary. Universal fit from 2-1/2" to 6" (70-150mm). Magnets allow for quick insert and…
- Pobrania
- 35
- Polubienia
- 38
- Ocena
- 0
P
PrintablesPotatoX
Magnet Applicator for 3D Printer
Magnet Applicator for 3D Printer Description A simple magnet applicator to prevent putting magnets in up-side-down. Note: If you have an AMS you can use the raised surfaces to make the print multi-color. Materials Support me by using the…
- Pobrania
- 33
- Polubienia
- 3
- Ocena
- 5
P
PrintablesJoen_P
Rectangular Magnet Remix - Logitech G29/G920 Steering Wheel Magnetic Paddle Shifter Mod V.2
Edited version of the original (https://www.printables.com/model/181710-logitech-g29g920-steering-wheel-magnetic-paddle-sh) to fit a pair of 20x6x1.5mm magnets on both sides. I used magnets with a 1.6kg pull force that I had laying…
- Pobrania
- 32
- Polubienia
- 8
- Ocena
- 0
P
Printablescrashkg
Wire Mount Magnetic
This model allows you to organize your cables with 10x3mm magnets instead of screwing into your walls. Insert the magnet into the base and run the cables as you normally would. I also included the F3D file so you can change the size to…
- Pobrania
- 31
- Polubienia
- 5
- Ocena
- 0
P
PrintablesCPS_Systems
Basic Business Card Holder Magnetic
Modified my coffee warmer stand to make a Business Card Holder with magnetic mounts. Up to 96mm wide cards. Space on the back for two 10mm magnets that measure 2.8mm thickness. Edit: Added file with “Take One” added as label. Edit2: Added…
- Pobrania
- 29
- Polubienia
- 5
- Ocena
- 0
P
PrintablesIbstickboy
Multicolour Flower Magnets
These flower magnet models I designed for a friend and was very happy with how they turned out! My designs were traced from a photo of flowers that my friend drew for another friends wedding. The flowers have holes on their rear side that…
- Pobrania
- 27
- Polubienia
- 5
- Ocena
- 5
P
Printableskaje
Magnetic Holder for Pushbutton Switch
This little gizmo holds a miniature pushbutton switch (see photos) and has magnets on the bottom to enable it to be held firmly on steel/iron metal surfaces. The pushbutton switch used is designed to be panel mounted in a 1/4" (7mm) hole.…
- Pobrania
- 27
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBen
Potion Explosion Marble Dispenser Magnetized
Just a remix of the dispenser - the rest is still the same, use the original thing to get the rest of the organizer. The "pin" setup was too tough for me to get right (the pins would droop and not fit, etc) so I added some depressions for…
- Pobrania
- 26
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEebel
Chopper Magnetic Antenna
The allows you to mount Chopper's antenna magnetically. This makes it les fragile and safer to transport. Additionally it is easier to do dome maintenance and upgrades as you can safely put the Dome upside-down.
- Pobrania
- 25
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDarkmoon
LED-Magnet Leiste PrinterBox
LED-Magnet Leiste mit 8x3 Magneten für PrinterBox Diese kann man in 2 verschiedenen Stellungen leicht anbringen. Diese Halter sind für die LEDś die von PrinterBox verkauft werden und auch beiliegen. Man benötigt 6 Stück von diesen…
- Pobrania
- 25
- Polubienia
- 5
- Ocena
- 0
P
PrintablesHespoHusky
Mininal Magnetic Picture Frames
Simple frame to hold pictures on magnetic surfaces. Uses 6mm diam x 1mm magnets
- Pobrania
- 23
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJohn
Scraperblade with magnetic cap
Some pictures are from a previous version. No need for support. Uses 2* m3 nuts, 2* (dome head) m3*8mm. screws and a Stanley style blade. The cap uses a ø8*3mm. magnet. (There's a stop in the Gcode)
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 0
P
PrintablesFetket
7 Magnet Habach Bar Array
This is the case for a 7 magnet habach array that a friend requested. It requires seven cubic magnets 1cm x 1cm x 1cm with known poles. Please note that this can be a dangeous item to make and should not be played with. Habach arrays are…
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 5
P
PrintablesAlexandru
Magnetic Headphoneholder
Inspired by: https://www.printables.com/model/43645-magnetic-headphoneholder/files No support required.
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 5
P
PrintablesJuHu
Magnetic Hotswap Adapter
Magnetic hotswapping adapter: This adapter allows for quick swapping of the pens during multicolor prints. It uses 20mm 11mm 2.5mm Neodym magnets. Insert them after the print with double sided tape.
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAero
Beefier interlocking, magnetic, stakable project trays
Re-did links, no supports, and used one 12mm x 2mm magnet
- Pobrania
- 15
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPhil Caruso
Number Learning Magnet Board
This Number Learning Magnet Board includes Number Tiles from 0 to 9 and a Base where a child learns to place all the numbers in the correct spot. The Number Tiles show the digits from 0 to 9, while the Base shows the text version in…
- Pobrania
- 15
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDelta Whiskey
The Krypton Factor Fridge Magnet & Keyring
The Krypton Factor ( https://en.wikipedia.org/wiki/The\_Krypton\_Factor ) came up in conversation recently, so I thought I'd have a go at recreating the logo. There are two versions of the keyring, one has normal text the other has…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
Printablesarleegee
devil halloween magnet
a multi object .3mf file that represents a devil with two magnets for mounting. The magnets are 6mm diameter 3mm thick neodymium magnets you can pick up at amazon. When you open the .3mf file, if the slicer asks if you want to treat the…
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMarkus
Displate Magnet Baseplate
I wanted a thin baseplate to attach the Displate Magnet, since the original protective leaf wouldn't work for me. You can stick the magnet on the baseplate and than mount the baseplate on the wall using screws, nails or double sided tape.…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printablesjonas81
Magnetic plumbus (camera mount)
I needed a way to mount an esp32-cam case to a metallic surface and had some 20x4mm magnets laying around. I printed this in TPU and it turned out ok. To make it work: Pause the print and insert magnets at the layer just before recesses…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesNicola Dronyak
MTG Magnetic Deck Box
8x3mm magnets are needed, 4x for the lid and 4x for the body. Use Superglue. For the mana colors I used water based UniPosca markers, white color is missing. That's it, feel free to remix it. :)
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTom's Print Garden
Bento Box Magnetic Base
I was building an enclosed Mk3S printer for a local school and needed a way to keep the Bento Box from tipping over in the Prusa enclosure, but it also needed to be removable so that the carbon and HEPA filters could be changed out easily…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
Printablesgedeyenite
Skillcraft Scissors Gridfinity Bin (Verticle) Orange & Gray Handle - No Magnets
I have a specific scissor. I could not find a fitted bin for it so I made this one from Seishin's OnShape Gridfinity Generator as a starting point. No magnets or screw holes. Link to OnShape if you want to copy and mod. Start from scratch…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
Printablesbollibe
Magnet pink star with Pixie name - Etoile Pixie aimantée
Magnet pink star with Pixie name - Etoile Pixie aimantée 5 aimants 5mmx2mm insérés pendant l'impression
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMiles Dawkins
Removable Magnetic Microscope Fume Extractor
I have been working with SMD parts under a microscope for quite some time, and have always used my big and bulky hakko fume extractor. While it works, it is very loud and takes up my precious desk space. I have looked up to see if…
- Pobrania
- 7
- Polubienia
- 4
- Ocena
- 0
P
PrintablesLogDog
Magnetic material hold down
3mil x 25mil magnets. Pause print at last layer before covering. Insert the magnets and start it back up.
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLililunar
magnets charge holder
holder for computer/phone charges.
- Pobrania
- 5
- Polubienia
- 2
- Ocena
- 0
P
PrintablesEngineerJoe
Headset Hook with Magnets
This hook holds a headset with a headband of 40mm or less. You can place up to 10 magnets (12mm x 3mm or 0.47in x 0.12in) in the back depending on the weight of your headset. Add some adhesive felt or rubber for more friction and…
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMr. LMJ
MagneticDeskOrganizer
This magnetic desk organizer is a clean and practical way to keep your workspace tidy. It’s perfect for holding small metal items like paper clips, screws, bits, needles, keys, or other magnetic accessories. With built-in magnets,…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJeff M
Magnetic Case for Synaptics Coralboard SL
Magnetic Case for Synaptics Coralboard SL A compact magnetic enclosure designed for the Synaptics Coralboard SL development board. The enclosure provides quick access to the board while maintaining access to essential development…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables._.
Hma Radio PTT Switch Enclosure for M12 Push Button, Snap-Fit Magnetic Base
Overview A compact desktop housing for the common 16 mm, M12x1 thread momentary push button (the red-cap style). The base snaps on without screws, a hidden magnet holds it to steel surfaces, and the cable enters at an upward angle to keep…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
Prusa Mini Enclosure Door Handle with PTFE Magnetic Coupler
About I used hole in the doors of the Original Prusa MINI Enclosure as an entry point for filament PTFE tube. Moved handle for fingers a bit lower, and added magnetic coupler in there for s 6x2mm magnets, which are popular in gridfinity…
P
Printables
Pokemon Electrode - fridge magnet
Easy to print magnet for fridge - pokemon electrode. You need one magnet 4x2mm
P
Printables
Blink (4th Gen) Outdoor Security Camera Rubberized Magnetic Mount for Vans
I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…
P
Printables
Voltorb - Pokemon fridge magnet
Easy to print magnet for fridge - pokemon voltorb. You need one magnet 4x2mm
P
Printables
Demon Slayer Zenitsu Agatsuma Magnet | Decoration For Whiteboard, Refrigerator, Locker, Cabinet | Home & Kitchen Essential, Classroom Office Supplies | Anime Gifts and Collectibles
DEMON LSAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Zenitsu Agatsuma magnet. Category: 2D Art
P
Printables
Magnetic Pencil Holder
Slides onto a pencil. Holds a 6mm x 3mm magnet. Suggest to superglue magnet in place. Quick to print. Print in TPU.
P
Printables
Watch Band Magnetic Clasp
I modified the standard link to incorporate circular slots for magnets. I also created a spring clasp, but I like the magnet version better. And I made a female-to-female link segment. I've added all the files here. If you have a FitBit…
P
Printables
Magnetic chess board
Discover our 3D-printed chessboard with embedded magnets—a perfect blend of modern technology and classic strategy. This sleek, durable board features magnets that keep pieces securely in place, ensuring a stable and uninterrupted game.…
P
Printables
Fidlock Twist Magnetic Bike Base - 13x2.5mm magnets - Remix
Replica of the genuine Fidlock magnetic base. Model has two internal cavities to drop in magnets during print then print over the top. Pause print at desired layer height to place the magnets. (Layer 60) Magnet size is 13x2.5mm. Careful…
P
Printables
Flex Cup Insert for Magnetic Tray
The first iteration is a single insert for a 3" magnetic tray. The one in this set . In addition to being a great TPU stress test, the idea here is that it's way easier to pick up all the parts in the tray at once by just lifting the TPU…
P
Printables
Flex Disc Insert for Magnet Tray
I set the print height at 0.20mm for three layers of TPU. Then, stuck in place with thin double-sided tape. The idea really works with any filament, but I like TPU in this application for the cushion effect.
P
Printables
Magnet Insertion Tool v2
UPDATE 24.09.2024 8x3mm Magnet Variant added (not tested by me as i dont have those magnets. These magnets may be too strong for this variant) UPDATE 20.09.2024 6x3mm Magnet Variant added INTRODUCTION v2 of my Magnet Insertion Tool, with…
P
Printables
Magnetic Quarter Launcher! Coin Flipper!
Play by yourself or compete with an opponent or play with teams; you make up the rules for your game! Hardware needed: 2 x Neodymium magnets, 5mm x 10mm x 60mm. 1 x steel rod, 3mm diameter x 65mm long. Glue (optional) 4 x Anti-Slip self…
P
Printables
K1 Series Quick release magnetic tool head cover.
Note:- The rear portion that attaches to the printer is included ‘ONLY’ in this download set. If you decide to use one of my other alternate cover designs you will need the back plate from t his Version .…
P
Printables
Magnetic storage box for fridge
We do have a lot of magnets from WolffKids to plan the week together with my kids. To organise the magnets itself I was looking for a solution. The vendor does have a similar one but I wanted to design it myself. The box can be printed…
P
Printables
Tiny Whoop Drone Racing Gate (fully printable, parametric, magnetic)
Print your own Tiny Whoop Gates! I hope this serves you well and feel free to give me any feedback or ideas for improvements. Have fun! Main loop This split into several parts (e.g. 4 or 6). These are just stuck together and hold well.…
P
Printables
Magnetic or Clip Hexagonal Token Trays, Dice Trays & Dice Tower.
This is a set of token trays, dice trays and a dice tower with tray. Each one has a width (face to face) of 100mm (4") and a height of 12mm with a curved 10mm deep x 90mm wide well. They can either be clipped together using the supplied…
P
Printables
Parametric Laser Cut Gridfinity Base Plate with or without Magnets
Fusion360 Parametric Laser-Cut Gridfinity Base Plate by The Mad Noodle Introducing a versatile and customizable Gridfinity Base Plate designed for laser cutting! This fully parametric design, composed in Fusion360, offers flexibility of…
P
Printables
Screw Tray with magnets
This screw tray was designed to collect the screws when taking electronics apart ;) It's a bit higher (22mm tray inside) to keep a decent amount of them. The rounded edge on the inside is to get the screws out easier. At the bottom of the…
P
Printables
Customizable knife box with magnetic lid
I always wanted to take my favorite knife with me to picnics or the pool. So I designed a fully customizable box for this knife held together with small magnets. The box is fully customizable (see pictures) in Fusion 360 where it was…
P
Printables
Magnetic plumbus (camera mount)
I needed a way to mount an esp32-cam case to a metallic surface and had some 20x4mm magnets laying around. I printed this in TPU and it turned out ok. To make it work: Pause the print and insert magnets at the layer just before recesses…
P
Printables
7 Magnet Habach Bar Array
This is the case for a 7 magnet habach array that a friend requested. It requires seven cubic magnets 1cm x 1cm x 1cm with known poles. Please note that this can be a dangeous item to make and should not be played with. Habach arrays are…
P
Printables
75 mm Large Magnetic Cable Arch
Inspired by the LTT magnetic cable management holders I designed these to go with 16 mm diameter x 5mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Each Magnets:…
P
Printables
75mm Small Magnetic Cable Arch
Inspired by the LTT magnetic cable management holders I designed these to go with 16 mm diameter x 5mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets:…
P
Printables
50mm Tiny Magnetic Cable Arch
Inspired by the LTT magnetic cable management holders I designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets:…
P
Printables
Magnetic Velcro-Tie Mount
Inspired by the LTT magnetic cable management holders I designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets:…
P
Printables
Keystone Magnetic Mount
This magnetic keystone single jack mount designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets: https://www.amazon.com/gp/product/B09ZLFNZ4S…
P
Printables
Dual Keystone Magnetic Mount
This magnetic keystone dual jack mount designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets: https://www.amazon.com/gp/product/B09ZLFNZ4S Inserts:…
P
Printables
Haken und Rasiererhalte für Duschregal mit Magnet
Haken und Rasiererhalte für Duschregal mit Magnethalterung. Die Magneten halten die Haken nicht. Sie dienen der Beschwerung und sollen das leichte verrutschen am Metallregal verhindern. Die Magneten haben die Masse 6mm x 2mm
P
Printables
Magnetic board game bits trays for 6mm x 3mm magnets
Modified the magnet holes to fit 6mm x 3mm magnets Also had to modify the hole tolerances so its easier to print the overhangs, but will no longer be able to pressure fit the magnet in Had to thicken the walls a bit to fit the bigger…
P
Printables
Magnetic Hotswap Adapter
Magnetic hotswapping adapter: This adapter allows for quick swapping of the pens during multicolor prints. It uses 20mm 11mm 2.5mm Neodym magnets. Insert them after the print with double sided tape.
P
Printables
Ergonomic Magnetic Paint Handle
This is designed to have an 8mm x 4mm round magnet inserted in the center. This handle should feel like the new Citadel painting handle for small models, however I designed it to work with bigger hands. This handle will work great with…
P
Printables
Magnetic Latch for Ikea's Besta doors
I am trying to create a dry box within an Ikea closet. Apart from a way to remove moisture, I needed to seal the edges. However the seal kept the door open. Since my closet dry box is experimental, I did not want to commit on an…
P
Printables
Magnetic Spool Rollers/Holder - RatRig Style
The original model needs some tolerance prints to figure out the correct scale % so the bearing holders snap together. You may also want to do a tolerance print for the magnets. There are lots of tutorials on how to do this. Otherwise,…
P
Printables
Magnetic snap sunglasses case for phone wallet xperia 10 iv
Case for magnetic sunglasses from owndays snap series, with elastic band slot, fits over a sony xperia 10 iv wallet, Requires: 4 * m2x16 bolt 4 * m2 nuts felt/soft material to line case 150mm * 20mm elastic loop (I used 300 mm * 20mm and…
P
Printables
ONE PIECE - "To Be Continued" Fridge Magnet
“To Be Continued” Magnet - One Piece This 3D-printed magnet features the famous “To Be Continued” text from One Piece, perfect for fans looking to add a subtle touch of their favorite anime to everyday life. The model is designed to fit…
P
Printables
Friction Fit Anderson Window Contact Sensor Magnet Holder
Depending on your windows and printing tolerances, you may print in ASA or PETG if the holder fits snugly. I printed in TPU with the flexible wing version and they fit securely, without any glue, and are easy to remove.
P
Printables
Ring Indoor Camera Magnetic Mount
This is a magnetic mount to allow easy repositioning of a Ring Indoor camera, uses two 8 x 25 x 2mm magnets. I've included a Fusion 360 file so if you want different magnets it is easy to do, if the new magnets are rectangular just change…
P
Printables
STRECHR.SPL - Magnetic Split Ball Stretcher
KDxGP STRECHR.SPL Check out my socials and other things at https://linktr.ee/KDxGP Like my creations? Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP. Thank you! STRECHR.SPL comes in two different heights: 15mm and…
P
Printables
Realistic octopus with longer magnetic arms
I really love the look of the realistic octopus head by Stanos , but I wanted the nice articulated arms like those from McGybeer 's octopus. While looking around, I realized I could combine everything and even add longer arms. Since I…
P
Printables
AG (Atarashi Gakko) Magnet
I'm just a big fan of AG! Also, this model uses 30mm by 1mm magnets
P
Printables
Gyoto Magnetic Knife Holder With Edge Guard
UPDATE: 3-1-2026: Added Edge Guard and drill guide stls and photos. Got this knife for my girlfriend for her bday and wanted to do something to make it easy to store and also look interesting. This is the knife if anyone is interested:…
P
Printables
Magnetic DNA / RNA Tiles
Explore the Building Blocks of Life with Magnetic DNA/RNA Tiles! Unlock the mysteries of genetics with this innovative set of magnetic DNA and RNA tiles. Designed for educators, students, and science enthusiasts, these colorful tiles…
P
Printables
Magnet Attractor
This housing holds sets of magnets in positions that generate an equilibrium of forces where the magnets remain close, but do not touch. The 6 holes at 60 degree separation holds four 6 mm diameter, 2 mm thick rare-earth magnets. The…
P
Printables
DELTA Q w magnetic joint and more
Taking the thing http://www.thingiverse.com/thing:351236 , I made some improvements, as magnetic joint, spool holder, endstop switches, carriages with 608zz, effector with autoleveling sensor and power plate with switch and fuse. All was…
P
Printables
Magnetic Remembrance Poppy
I always want to wear a poppy for Remembrance Day but always wind up poked by the straight pin versions or end up having them fall off. Last year I lost the backing off the flag pin that I had used to replace the straight pin for a few…
P
Printables
Magnetschlüssel Ersatz / Magenetic Key Replacement
--- English version below --- Das Gehäuse eines der Magnetschlüssel für die Schubladen-Kindersicherung ist auseinandergebrochen. Daher habe ich einen simplen Ersatz für den inneren Magneten erstellt. Passt für einen Rundmagneten D 20mm /…
P
Printables
Soldering aid - clamp with simple internal magnetic base
I really wanted to make this work without the TPU base as i dont have TPU. And I only plan to use this on a metal sheet instead of its family of tools. So made this simple remix in tinkercad. The updated base has a 11mmx2.2mm hole inside…
P
Printables
Wage War Logo Magnet
Decided to make a fridge magnet for one of my favorite bands There are 2 cavities in the model for 15x3mm magnets. All you have to do is put a pause in while slicing the model.
P
Printables
Expandable 3 sloped hexagon parts tray with sockets for magnets
Just a smaller version of the original design. My work table is too small for the original design.
P
Printables
Card stand for magnetic holder - engraving not included
These i printed for these magnetic hard cases i have, no idea if they're universal, i dont collect cards usually. The cases i have measure around 7mm in thickness and 73mm in length, hopefully this helps to know if it'll fit your holders
P
Printables
Magnetic Case for Apple TV Remote - Model A2540 (8x3 Magnet)
Changed magnet size to 8x3 because that's what I had.
P
Printables
Micro travel case with magnetic lid (Print in place)
I needed a small case to carry my earplugs so I designed this box. But it can be used to store all kinds of small items that need protection. It requires 2 cylindrical magnets with a diameter of 3mm and a height of 2mm. It is a print in…
P
Printables
folding ruler 3m magnetic hinges
A foldinge ruler 3m (extended edition) to measure furniture, rooms or makes. This model provides insets for 10x2.5mm round magnets as hinges and 6x2mm magnets for stability and snap into position. They all should be aligned in the same…