1 / 4
Ikea Lack Enclosure Door Knob remix for 20x6x3mm rectangle magnets with top stopper
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the door knob for the Ikea Lack enclosure, adjusted for bigger magnets, smaller knob, and with a top stopper.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 81
- Wydruki
- 2
- Wyświetlenia
- 593
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (28)Powiązane
A remix of the door knob for the Ikea Lack enclosure, adjusted for bigger magnets, smaller knob, and with a top stopper.
I basically redrew the part, with the following changes:
- Adjusted magnet slots to 19.75*5.7*3.2mm (my magnets were sold as 20x6x3mm, but slightly smaller than that).
- Made the knob smaller. (I didn't like it that big.)
- Added a top stopper with magnet slots so that the door is held better when closed. The stopper matches the smaller clearance between the door and enclosure.
- Countersunk the screw holes.
I tried to keep the same footprint, so it can be used on previously drilled holes.