Liczymy pasujące modele…
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
9 ¾ train platform sign I designed from Harry Potter Studios / Hogwarts Express Few ways it can be mounted: - Mounted to a wall etc with screws - Can be used with Ikea Skadis - Can embed magnets see the remix to embed magnets . Make a…
Hang your IKEA Mittzon under-desk felt "basket" 10 cm lower. I needed more space for all the cables, KVM switch, power adapters, etc. The "hook" part takes a bit of fiddling to push through and it holds very strong. I recommend using M4…
Stackable Bin for IKEA Alex Drawer A storage bin designed for the IKEA ALEX drawer, printed as a single piece: no assembly, no glue, and no supports needed. Light yet sturdy : only 264 g, while staying strong Easy to print : one piece, no…
I modified Sy's original design to work with Ikea Skadis pegboards
description I was tired that my shoes fell sideways when i took the pair next to them. This model will keep each pair in their place. No screw, no glue; no damage to the furniture. how to print As supplied; pins are indeed printed…
Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter. Simple to print, easy to install, and has helped to improve my Quality Of Life. IMPORTANT Please read the instruction guide below. I do my best to…
the missing files can be found in the original model
It's quite possible to use a mouse right on the chair arm without any mods, but with this addon, it becomes even better.
Holder for Paper Towel for IKEA SKADIS. Print settings: Printer: Prusa Mini Nozzle: 0,4mm Material: PLA Layer Height: 0,2mm Bed Temperature: 60°C Nozzle Temperature: 215°C Infill: 100% Supports: no
Platform for IKEA SKADIS for the standard PRUSA filament spool holder. Print settings: Printer: Prusa Mini Nozzle: 0,4mm Material: PLA Layer Height: 0,2mm Bed Temperature: 60°C Nozzle Temperature: 215°C Infill: 100% Supports: no
This strainer sits around 1cm above the bottom of the Ikea 365+ rectangular stainless steel food container (205.803.19). I use these containers next to my pizza oven for my topppings, and use the strainer for the one with diced…
I designed this towel hook to test the ability of my new MK4s with overhangs. The overhang has 70 degrees and works perfectly! There is a single towel hook file, which can be combined in prusa slicer to an arbitrary number of connected…
I was a few plugs short while building ou kitchen cabinets so I made this model. Printed with PLA with 0.1 mm layer height. No support or brim needed, print it in the original orientation.
You can use the models as a spare part for the pivot point of the IKEA HEMNES shoe cabinet. They tend to break after some years of use. The three countersunk bore holes can be used for reinforcement issues (optional, use M2,5x10).…
I am trying to create a dry box within an Ikea closet. Apart from a way to remove moisture, I needed to seal the edges. However the seal kept the door open. Since my closet dry box is experimental, I did not want to commit on an…
The top backrest mount of my chair broke, I think the design is flawed. This part replaces the original mount and moves the backrest a little further back so that it rests on the “spine”. Print with 100% infil, doesn't really matter what…
UK Holder for IKEA STYRBAR. Model adapts the original to cover UK light switches completely. Uses existing hardware. Still gives access to light switch if needed. Printed with supports on Creality K1 Creality Hyper PLA white 0.16 layer…
here I have simply added all the IKEA SKADIS Collection to a zipped file for easy download of all the models. You can choose individual files or just download the zipped file and unzip.
Description With this vertical note storage you will be able to store your notes on the Ikea Skadis board in a vertical position. Sizes The model is parametric. So if you need another size please drop me a note so I will create and upload…
Shelf which perfectly fits on the side of an IKEA SMÅSTAD loft bed. Has the following features: Mounts to the side of the bed. If you want to have it fit to a corner please check out the original model Shelf dimensions: 228x190mm Clamp…
Is your sofa wobbly or does it just need to be raised a little? Here is the solution. First print the test file and test if it fits to your model. Then select the desired height and print it out. Insert the riser into the original foot.…
This is a Raspberry Pi Camera Case Holder for Prusa IKEA Lack Enclosure. It's a very sturdy permanent solution for the Lack Enclosure, adjustable in 2 directions (up-down) and (left-right). Fast and very useful print!
The X1C's feet didn't sit securely on top of my Alex cabinet as it was slightly too narrow (about 6mm). This mount solves this problem by extending the width of the cabinet so that the feet are firmly supported, making it harder to…
This is Baseus 100w charger holder for IKEA Skadis pegboard. This item is inspired by IKEA SKADIS Collection by CSD Salzburg, it uses the same hook system (I included the hook). Check out the collection of other IKEA Skadis holders I made .
printet with basic settings in petg. 0.2 layer, 0.4 width. on enderKE
This is an easy design pin with an integrated washer for distance purposes. It fits to many IKEA products. For example the daybed “Flekke”. Please feel free to print without waiting for mail order durance.
To securely attach the hanger under the table, it is necessary to remove the two screws that fasten the table leg to the tabletop. The model has two holes that fit these two screws, which are screwed back in when installing the hanger.
I tried multiple variations and adjusted the dimensions to perfectly match the JONAXEL. This one is super tight and strong.
I have an Ikea kitchen table (Ingo) with a very narrow edge, so it's impossible to have a good grip for a clamp supplied with Ikea's Tertial work lamp. I designed my own version, that follows original design while providing good grip for…
Lego Skadis Minifigure mounts that allow for a secure fit and the ability for the Minifigs to sit or stand. Can be scaled +-1% depending on your print settings for a tighter/looser fit. I print them with PLA plus however PETG and ABS…
This holder is designed to hang a 1:10 scale RC car directly on an IKEA Skådis pegboard. The car hangs securely by its tires, with the holder optimized for tires with a diameter of 110 mm. Features: Compatibility : Fits RC cars with tires…
Split into two components Origin: https://www.printables.com/model/647345-ikea-skadis-files-holder
its just a tray use supports (normal) support removal can be tricky, be aware
This custom-designed 3D model is a practical solution for organizing USB cables on the IKEA Skådis pegboard series. It allows you to securely attach USB cables to the Skådis system for quick and easy access. The cables can be effortlessly…
An organizer for the 30cm Ikea Method Rack to store 8 spice glasses (~67mm diameter) more efficiently.
EDIT 20.08.2025 -added a 6.2mm hole version because some nozzles can fall through the original design -if you don't know which version you should print, choose Skadis Nozzle Holder 6.2 mm Nozzle-organiser/Holder for the Ikea-Skadis system…
A small print you can use to mount your IKEA KVART Spot to the wall.
A simple arc that can be stuck in the holes of an Ikea Ivar shelve and will help with cable management. The modell has a slightly thinner profile at the two ends and thickens towards the arc to better stay in the holes. If you have…
This is a socket for desk lamps with a 13mm pin. It requires 4 T-clips from https://www.printables.com/model/256896-skadis-t-clip-system. Additionally there are also specialized clips included for the inline switch, which are a remix of…
Fits one Spray Bottle. Prints without supports. Uses full-size T-Clips . Maintains its orientation on the Skadis board via a protrusion on the back that slot into the Skadis holes. I tested with several different spray bottles at home and…
V1.0 I may need to update this model. But you are welcome to try it out yourself. Most likely, it would just need a slight scale adjustment. V1.1 Added taller slots for cables. V1.2 Moved switch slot 3mm
I created a simple shade for the Ikea Mittled lightbar. It's modular and can be used for all length of the lightbars (40, 60, 80cm). The ripples at the front cover the seams between each part as good as possible. To connect the single…
Printed with PLA on Bambulab A1 mini with 0.4mm nozzle. Snap-fit securely holds the charger and attaches well to the Skadis board. If it doesn't fit as expected, I can provide model with a bit different/bigger tolerances.
Holder for 7 mediu paint tubes. I adjusted the original model to fit in Van Gogh Oil paints.
Printed on MK4s with thicker walls and 50% infill.
Remix of the already great design by pipo. Also check out the original design! Let there be light! Use this model to easily mount an IKEA SKYDRAG oder SILVERGLANS (40cm) light bar to the Z-axis of your MK4/MK4S. The light bar is also…
I got annoyed by that the hooks of the IKEA Hultarp kitchen organizing rail (see Ikea Screenshot) all the time fell out of the rail when taking off some things for cooking. Therefore I printed these little locking parts. They lock into…
I mounted the IKEA FLISAT wall storage on the IKEA SMÅSTAD. To keep things from falling out I designed this divider. Simply print as many as you want and and clip it on the places you want. To secure them you may optionally put a small…
This fitting holder offers several distinct features: Versatility : It can accommodate one or two fittings simultaneously from the top and bottom, depending on your needs. Drybox support : By using two PC4-M10 and PC4-M6 fittings per…
Strong shelf pin for Ikea and other brands, with filament insert. I needed replacement pins for the shelves. I was worried about their strength when printing. That's why I designed them with an inner hole, into which superglue is dripped…
These are designed to allow for simple cable management within the beam running across the desk. The pocketing grants less material usage, ability to pull cables through as well as squeezing thin plugs through. Two of these have the…
Holder for ikea OMTÄNKSAM shoehorn with space for magnets . Can be used without magnets.
Legs for the IKEA dresser of the KULLEN model, consists of a set of 6 legs, Ø5 wood screw is needed. (Patas para la cómoda de IKEA del modelo KULLEN, consta de un juego de 6 patas , se necesita tornillo madera Ø5.)
This is remixed hook for Ikea Skadis so it fits New NIntendo 3DS (non-XL) (If you dont use clear case it still would work but you can push model 0.5-0.6mm so it is more snug) Original author: @vinzcenzo
2nd Remix. Remixed the original to work with a 5" i am building, seen some remixes which added more depth but not width and the original one would just about fit the width of my frame but was too tight to rest under the arms so just added…
Side hook for IKEA BROGRUND towel holder. You will need one M3 square nut and one M3x12 screw . Printed in Petg with a solid part where the screw is inserted (as shown in the .3mf file).
Kappen für Ikea Ivar-Seitenteile - genutzt, um schrägen Fußboden auszugleichen - auch als Schutz vor Nässe auf dem Boden denkbar
The container was designed for roughly 200g of silica gel (half of the container is empty). A 22 litre IKEA Samla box can easily fit two containers. All dimensions are configurable. Extra parts: 4x DIN 912 M3x8 screw 4x 5x5 M3 threaded…
Ikea Skadis mount for the Ubiquiti Switch Lite 8 PoE that uses the same geometry as the original Ubiquiti wall mount, but instead uses @ 6d6178 Skadis T-Nut system. This model uses 2x M2.5 T-Nuts which can be printed from here…
Dos versiones de soporte para el Skadis de IKEA del mando 8BitDo Ultimate 2C. Two mount versions for the IKEA Skadis.
the outer lockingring to prevent the electronic guts from getting pushed in der Ring der unter den Drehknopf geklemmt wird um zu verhindern dass sich der elektrosatz löst prints without supports. 0,4mm nozzle; 0,2mm layerhight fits this…
A shelf holder pin for the Ikea billy shelf for adding non-original boards (i.e. without the hole for the notch). It uses a thin flap between the side and the board to increase the stability (without, it would just bend inwards). I…
This is two plastic spacers from an old IKEA wooden lamp. One is the half on which the light bulb hangs, the other is the lower spacer.
This is just another zip tie cable holder. It is a copy of the ones sold on Ikea many years ago.
A replacement for the guide from the Filament Spool Holder for IKEA SKADIS with Rollers to hold a Filament Sample .
Do your Victorinox Swiss Army knives currently live in a messy drawer, forgotten and unloved? Do they deserve a VIP spot where they can shine in all their multi-tool glory? Say hello to the Victorinox Swiss Army Knife Hooks for IKEA…
control panel - temperature, ventilation, and light. you will need: Digital Temperature Controller Thermostat Thermoregulator incubator Relay LED 10A Heating Cooling STC-1000 220V - 1 pc…
A simple shelf to mount an Ikea Vindstyrka and Amazon Alexa Echo on the wall with holes to allow cable routing through the bottom. If you would like the exposed infill as per the pictures, I have uploaded the modifier shape to allow…
A idea to lift your shelf off the ground and make it able to be easier to use. the size of the shelf this was mad for is 150 x 41 x 39, (height, widest, depth). this should work with any shelf from 2013 - 2025(current).
Storage for up to 8 wooden trains for BRIO, IKEA with max. size of 45mm x 105mm Requires: 2x Screw M4 x 30mm (better M4 x 40mm) 6x Magnet Ø6mm x 3mm
We wanted to stack plastic takeaway containers on top of the IKEA UTBJUDA lunch box, but as the lunch box has a smooth lid and is smaller than most common takeaway containers, I decided to make this adapter. I also made another version…
A remix of https://www.printables.com/model/374789-gridfinity-collection-solid-bins-for-customization (Gridfinity_1x3_14mm_solid_Magnets.step) This was designed to fit inside an IKEA Alex drawer. The height of the stand + tool is ~12.2cm
This is a 3D-printable mold for casting a concrete teapot warmer designed to fit the IKEA RIKLIG teapot. The stand not only provides a stable base for your teapot but also features a built-in space for a tea light candle, allowing you to…
A handy little contraption that lets you feed your sewing or embroidery threads to your machine directly from an Ikea Skadis peg board. You can use these hooks to mount up to five thread spools underneath.
Note: This is for a previous version of the IKEA DUTKIG. Later models have a different leg orientation. The play set we have is a solid wooden leg. We got a second-hand IKEA DUTKIG, and one of the leg covers was missing. This is a simple…
Spiral staircase for IKEA Lustigt. Same height as normal ladders.
Youtube video: https://www.youtube.com/watch?v=UuBXoj44C6Q I made and or customized the following models to use for my workshop tool organisation. have a look below.
I created this Ikea Mosslanda support for an old video projector I had lying around. The piece slides smoothly from any side of the shelf to the desired position and stays in place when the projector is placed on top. In my case, I…
Description The bracket is designed to hold the RODRET switch in position during operation. The original holder with the magnets was not strong enough and the switch broke apart after falling down. You can slide it into the holder from…
Side mount for Ikea Office chair replacing the side rests. The arm rests was annoying as the prevented the table from getting down to right height.
This is a simple and functional AA battery holder designed to attach securely to an IKEA SKÅDIS pegboard . It allows easy access to your batteries while keeping them neatly organized. The model is optimized for 3D printing , requiring…
As Ikea is not selling the mounting frame separately, I designed this frame to have a tight fit for the koppla power outlet. depending on the printer tolerances you have to scale to 99% printed with PETG, 0,4mm nozzle
Add wheels to Ikea Samla 22l Done for the STANDERS 360º 35MM 30KG wheels, bought on Leroy Merlin https://www.leroymerlin.pt/produtos/4-rodas-interior-standers-360-d35mm-30kg-82629488.html . Attach with M4 x 10 mm screws and M4 nuts Remix…
I designed this clamp for the Ikea Billy bookshelves to display my books and manga. I have a couple of Billys in my house and found that the newer ones shelves are slightly thicker than the older ones, so I made two versions. The model…
Let's kick off February with a handy little dust and display shield for the IKEA Kallax if its your collection display unit of choice! There might be a little variance in each little cubby hole of a IKEA Kallax but for most parts, this…
IKEA SKADIS Shelf with Honeycomb Pattern Dimensions of the bottom part of shelf (plus outer brims and hooks..) 20 x 120 mm 30 x 120 mm 30 x 160 mm Sliced with the modifier to expose the infill pattern You can freely change the infill…
The Ikea Komplement divider for the 40 cm depth Pax (804.675.65) have a tendency to look disorderly. This brace fixes that.
So if Ikea won't make them screws in the same color as their pegboards, then you can do it yourself! Or any other color actually. You just gonna need few M4x16 (bit shorter will do also) screws with hexagonal heads (7mm). They sit quite…
The 3mf includes original model remixed with numbers to either side. Prerequisites The font pictured is Transport Heavy , originally designed for street signs in the UK
This remix is intended for spools vertically stacked and aligned . Filament can be threaded through the back with minimal to no bends. Prerequisites The font pictured is Transport Heavy , originally designed for street signs in the UK…
Fills the gap used as a handle on the door of the IKEA Alex cabinet. I've included STL's for versions with and without a handle, as well as the basic shape without the back plate if you want to do something else with it. I designed this…
Es un soporte para mantener la estantería IVAR de IKEA pegada a la pared, muy interesante si tienes impresoras 3D en ella, para evitar vibraciones. La distancia entre la estantería y la pared es de 5cm con este soporte. It's a wall mount…
![Stackable Bin for IKEA Alex Drawer [big printer]](https://media.printables.com/media/prints/fb013f45-d611-480c-a1e4-3ea138246999/images/14260152_f84155e9-fcb0-4883-9e0c-9ad147c770c8_04cd64f2-19db-4819-9ed7-bd4322566966/photo_1_2026-10-27_22-57-06.jpg)
![IKEA SKÅDIS PTFE Tube Holder Twist Lock Numbered [remix]](https://media.printables.com/media/prints/1210991/images/9092118_f6c76690-9ae0-4b13-a609-2cb82a2a4f4e_e2cfec0b-6583-4bc9-8155-14979512bb8e/20250228_183518jpg_compressed-photoroom.png)
![IKEA SKÅDIS PTFE Double Tube Holder Twist Lock Numbered [remix]](https://media.printables.com/media/prints/1217861/images/9140018_3f0b859a-a727-47f2-9cc1-54fc78b8ad16_c6a52c84-e2fb-4002-95f9-0a532296c02a/20250305_210901jpg_compressed-photoroom.png)
