Brad's IKEA LACK Filament Tunnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really liked ChipCustomizer's filament tunnel, but I had problems with it breaking at the layer line on the screw…
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 326
- Wydruki
- 4
- Wyświetlenia
- 1444
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I really liked ChipCustomizer's filament tunnel, but I had problems with it breaking at the layer line on the screw part if I accidentally tightened it too much.
So I recreated it with thicker walls. The tunnel has a 10 mm outer diameter (instead of 9) and the inner diameter is 4 mm (instead of 5.5). And I also added a couple of chamfers.
Print instructions
I recommend you print this using adaptive layer height so that the screw sections are printed in 0.1 mm (or less) and the flat tunnel part is printed at 0.3 mm.
__________________________________________________________________
🧡 Let’s Both Earn Some Prusameters!
If you like this model and are thinking about getting a new Prusa printer, use my referral code @SpeakingOfBrad at checkout. You'll earn some Prusameters, and so will I, which helps support my future projects.