Liczymy pasujące modele…
This is a 3D printed frame into which you can glue/silicone sealant mount a laser cut acrylic window. This allows the windows to sit flush to the interior wall of the test section. This significantly improves flow quality. A 1/16 inch or…
Mountain with high peak and tunnel that will fit N scale trains. The one I have exits into a turnout and doesn't interfere with the train.
just a simple 10mm tunnel i made for my roomate
Here is a beautiful piece of art to hang on your wall, with a 10mm hole at the top to accommodate this. A series of offset spirals show a different display of colour from every angle! If you would like to view the 3D model in colour in…
A 120mm x 34mm x 27mm C channel to hide cables for Thread Boards by 3D Printer Academy Printed in Elegoo PLA-CF Printed on Elegoo Centauri Carbon Wall Loops - 6 Top Shell Layers - 6 Bottom Shell Layers - 5 Infill - 20% 3D Honeycomd…
it's a shrimp tunnel that you can put in your aquarium soil so the shrimps can hide and explore while you can still see then trough the glass
LEGO DUPLO TRAIN tunnel Material: PLA Perimetr: 2 Filling: 15% I recommend support in windows and doors.
A Tunnel Front Sight for olimpic shooting, with a Ruger American Rimfire adapter (you can change the curvature for other muzzler) with a 12-38 insert sample.
Tunnel for gauged ears 40 mm but can be resized in slicer to desired MM
Intended for use with the EDU Wind Tunnel Github Repository to add Arduino based airspeed measurement and control to your Modular STEM Wind Tunnel project. See the GitHub repo for full documentation and details of use.…
English The idea was to create a tunnel portal similar to the detailed Noch Profi Tunnel. It is designed and scaled to nicely fit two tracks in H0 scale. I recommend to print it horizontally (obviously) and use only one or two bottom…
🐀 Rat & Rodent Tunnel System — V2 Excited to release a new version of my tunnel system! This time, I used 80mm diameter tubes and a directional cube to allow expansion in all directions. Compatibility: If you liked V1, you will find an…
Brick tunnel sized appropriately for N Scale train set. 154mm length, 60mm width and 60mm height allow plenty of room for your train. You can add customizable text and images to the plaque and attach it to the top or side of the tunnel.
Print using suitable materials for your aquarium This "hide" has a lip on the top to prevent sand and substrate ingress into the tunnel when fitting it. Part measurements Height: 5cm Width: 22cm's Depth: 4cm's
This is a 3D printed frame into which you can glue/silicone sealant mount a laser cut acrylic window. This allows the windows to sit flush to the interior wall of the test section. This significantly improves flow quality. A 1/16 inch or…
The wall mounted car track tunnel with light channel and cable channel is compatible with hotwheels track. the light channel uses a seven inch led strip.
This organizer for the center console of a 2019 Dacia Sandero adds extra space for accessories. Printed with a 10% fill.
This modular rainbow tunnel was designed to create a bold, dynamic backdrop for cinematic product shots and timelapse sequences. The design uses stacked filament spools to form a colorful tunnel that allows a camera to move through or…
Detailed steam train emerging from a rocky tunnel, designed as a functional decorative bookend.
This is my custom made tunnel that fits the Vevor Powder Coating Gun. This is slightly smaller than the Harbor Freight version. When installed with the new diffuser designs that are available, it will improve functionality of this tool.…
This is my version of the Harbor Freight Powder Coating Gun tunnel. It is very similar to the units available on the web. This will not fit the Vevor gun. Link for Vevor version here:…
this is a 8mm tunnel earring. this is a remix of one of brentglover1970 plugs. i remixed this to make it look like a spur gear. i do not know if this is scalable.
Die original Clipse sind porös geworden - sie sieht man auf dem Foto noch (ergraut). Ich habe die Ersatzclipse modelliert und aus PETG mit 100% Infill auf dem Prusa Mini+ gedruckt. 16 Stück gleichzeitig ist kein Problem. Happy printing.
Universal mount for DJI O4 air unit with camera and antennas. It is designed for mount on stack 30,5 x 30,5 with M3 screws. Camera angle is 40-50°. Designed for five inch X frame with no props in view. Next version has bigger angle range…
This model allows you to easily create a tunnel for a DUPLO train setup using a simple and flexible design. The tunnel consists of two identical arch pieces that only need to be printed twice. A piece of cardboard is then inserted between…
These tunnels allow the marble to pass through the spacer instead of going around it. Two different variants are included: Straight Tunnel The marble enters on one side and exits on the other side at the same height . Slope Tunnel The…
Mountain with high peak and tunnel that will fit N scale trains. The one I have exits into a turnout and doesn't interfere with the train.
This tunnel is designed to fit in the corner of an enclosure for lizards or reptiles. It can be filled with dirt so they have something to dig through, or just used as a shelter. The tunnel can be oriented in multiple ways. The model…
Put your shrimp to work in the mines! JK, give them a place to hide while decorating your aquarium. There are two versions, one with retaining elements to keep substrate out of the cave, the other has a flat roof As with our other…
Lenovo Thinkpad T14 Castle Holder with Cable Tunnel. With a little tower on the left for Ethernet cable plug and cable hiding. Also with venting holes not to block cooling.
I really liked ChipCustomizer's filament tunnel , but I had problems with it breaking at the layer line on the screw part if I accidentally tightened it too much. So I recreated it with thicker walls. The tunnel has a 10 mm outer diameter…
I wasn't quite happy with all the existing options so I took ideas from several places and put them together to make just what I was looking for. I hope it fits your needs as well! I designed these to fit my Brio and compatible tracks, so…
Here is a beautiful piece of art to hang on your wall, with a 10mm hole at the top to accommodate this. A series of offset spirals show a different display of colour from every angle! If you would like to view the 3D model in colour in…
This SUPERSET includes ear plugs and tunnels from 6mm to 30mm diameter and the original parametric FreeCAD file that you can use to create any size of plugs and tunnels. Quick and easy print! Print a pair for each nice filament you have…
Perhaps in homage to one of my all time favorite TV shows, or maybe in hopes that it will actually send my cats half a galaxy away to use the litter box, either way it makes me smile. (The cats are indifferent.) The portal allows them…
This Tower is 140mm high and has an inner channel for balls. No print support structure needed. Thanks for download. 09/01/24 update outlet See video for demonstration:
CABLE-BRIDGE ____ [3x 9.5mm max diameter @ 100% Printsize] Connected with SuperGlue. ADDED: - PRINTING PARAMETERS AS SCREENSHOTS - Endpieces
This is version 1 of the tunnel front, a second version is currently being worked on.
H0 Tunnel 1:87 works for Märklin C-Gleis and other brands like Roco, Fleischmann, Piko. H0 Tunnel, single track, with small windows and without windows, connectable with connectors. Length of the tunnel is 195mm (~7.7in). Caution: It is…
This is a tunnel portal (tunnel door) for the existing tunnel elements . It can be connected with the given connectors. It is symmetrical. Connecting two tunnel portals creates a micro-tunnel. H0 Tunnel 1:87 works for Märklin C-Gleis and…
These are tunnel tiles. - you can put other tiles on them. They come in two angles: 120 degrees and 180 degrees. Initially I designed for my zigzag models. I'm sure you'll want to use them for the bottom layer of zigzag.…
it's a shrimp tunnel that you can put in your aquarium soil so the shrimps can hide and explore while you can still see then trough the glass
I have built a Winter Wonderland village with LEMAX products. I needed a tunnel, so I designed this. I also share this with you. Print Settings Supports: Yes Category: Buildings & Structures
Railway OO Tunnel Section Stone. Inspired by British Victorian railway tunnels. Print in resin at 0.05 hight if possible. Test print in the photos achieved with Anycubic X2 at 0.05mm Z hight. Use in pair with a tunnel front. Enjoy
Hello Tribe This is a a Tank design for table top wargaming and it based on my Tunnel Rats Faction.
A frame, two fan cones, and a lid makeup the whole assembly. The fan cones need to be adhered to the SDR frame. The lid on the USB end will stay in place with friction. The fan cones are intended for use with 40mm fans, specifically the…
Pair with https://www.printables.com/model/1048539-model-train-railway-oo-tunnel-stone/collections
This is a trophy showing a time tunnel that symbolizes the effort made over time to create something exceptional. This model is a little more complicated to print on an FDM printer. It consists of several parts that must be assembled. I…
I print these on my MK3S with 0.3mm Layer Height and 0% infill. Tunnels like this can be found on German High Speed Railway like the Schnellfahrstrecke Hannover Würzburg.…
I made a bunch of hot wheels tracks for my son, which made my daughter jealous. So i made this tunnel for her, printed in Pink Silk PLA and she Loves it!
A simple train tunnel to fit over you model railroad I made while learning Blender sculpting. The tunnel is not to scale for a particular track width, the tunnel mouth is be around 7x10 cm. Scale it to fit as needed. The underside isn't…
This is a little tunnel for wood trains (e.g. Brio or Ikea). Print two exits and glue them to the tunnel and you are ready to go.
This is a tunnel portal (tunnel door) for the existing tunnel elements . It can be connected with the given connectors. It is symmetrical. Connecting two tunnel portals creates a micro-tunnel. H0 Tunnel 1:87 works for Märklin C-Gleis and…
Remix of the following designs: https://www.printables.com/model/255855-brio-compatible-standard-h-cross-track by @PrintATrain https://www.printables.com/model/329413-brio-wooden-train-tunnel by @Daniel_5163…
This is a simple aquarium tunnel with two pipes for entry/exit. 0.6mm nozzle, 0.3mm layer, PETG, Sovols SV01
This is the side of the AEW entrance tunnel sized for AEW action figures. Print the main body of the sides with black filament and use white filament for the light bars. This is made to come apart so you can put LED lights inside to light…
Exhaust Fan Tunnel for Qidi Q1 Pro internal 60mm Exhaust Fan
This railway tunnel, thanks to its special design, fits all popular wooden railway tracks. Compatibility: IKEA Lillabo BigJigs LIDL train BRIO In order to print correctly, you need to have the filament flow properly calibrated. If the…
Tunnel for wooden tracks, compatible with all types of wooden tracks. Printed with supports. Nozzle: 0.6 mm; layer height: 0.32 mm structural; 5% infill. It's good enough for my son! :D
This tunnel is made for train landscape in H0 scale. The tunnel is scrimped for ICE and typical 0 locomotives with large carriages. high:8,5 cm; lenght 17 cm; width: 7 cm CAD: Tinkercad Slicer: Prusa for MK 4 with MMU MMU extruder…
The stock sliding cover was slipping and wouldn't catch the rear part anymore so I made this one to have it be functional.
A 3D printable functional AE86 Sprinter Trueno dyno diorama build. This is intended to suit a 1:32 AE86 diecast model. Printed with PLA/PETG/TPU - Please find more details in the attached PDF (Guide-sort of :)) You can also see some build…
The Modular Wind Tunnel for STEM Education is distributed in the Printables Store and is therefore automatically licensed with a Standard Digital File license that, unfortunately, limits the community's ability to contribute to the…
A small wind tunnel for testing aerodynamic drag on parts. There are 2 velocity mount inserts, one uses paper straws bundled together and the other is fully 3D printed. The fully 3D printed one will use a reel of filament (~1kg). The…
Update 1: For a better approach, check this out: https://www.thingiverse.com/thing:4352377 The original design is great and I appreciate the effort the author put in it. However, in my opinion, the air tunnel/room is too large and not…
Hello, i made this model for my long barbell, you can use for any stick of Ø12.5mm or any other stick that has a diameter of 25mm printing settings: print without supports, if you want to you can add ::::::::::::::::::::::::::::::: : you…
LEGO DUPLO TRAIN tunnel Material: PLA Perimetr: 2 Filling: 15% I recommend support in windows and doors.
Simple N Scale Railway Tunnels. Upscale the tunnels to H0 or any other scale. Printing I printed with PLA, 0.2 mm layer height.
#RC Car Tidy Cable Tunnel Hide all your Radio Cable in your RC Car including your Transponder Have fun and see my other designs in my profile ...don't forget to share your prints. I would love to see some parts. Don't forget to hit the…
Tunnel for Scythe - can be used to identify the Tunnel spaces on the modular map as well as the original map. Measures 27x27x10mm, but feel free to scale as you like. Check out more like this at https://SuperheroDIY.com , and follow me…
As I run out of duct-tape I had to secure my stumble trap in the cellar in an other way: printing a tunnel to keep the cable down on the floor. Here it is… Printed with “Nylon”, no support is needed. For the rest, use the automatic “paint…
WIP! As per special request by my dad, I am designing a fully modular tunnel system. The first modules are ready for everybody to test. More modules will follow, including pillars in various angles, shorter segments of wall as well as…
Did a simple resize and hollow of the blank gauge, printed and measured with calipers. Print both or use Microsoft 3D Builder or Meshmixer to split them. Category: Earrings
🏎🔥 THIS IS THE BEST LOOKING Organizer for HEAT: PEDAL TO THE METAL (SUPPORTS 2 EXPANSIONS!) THAT YOU CAN PRINT! 🏆 Update Log - Date: 12/06/25 - New file added: Spacer big x1 v1.stl This new model can be printed as an alternative to using…
Tunnel Snakes Rule! This was made to fit on a CR-10S so it will need to be scaled down for something like an Ender
This is an additional Armoured Tunnel Hatch for the SCI FY Train. Making your environment just a little more detailed, interesting, and complicated! Remix of the Armoured Tunnel Hatch for the SCI FY Train. Also including a remix of the…
This is a 20mm Tunnel. I printed in ABS and vapor smoothed it with Acetone.
This is a wooden train tunnel that I made for my kids in 2013, think people here also would like to make it :)
This is a 150mm long version of my other train tunnel.
This is a detailed and well grained timber model railway tunnel mouth. I suggest you print it flat and with the grain upwards. I make model moulds at scalecast.co.uk and this used to be one of the moulds we made and sold, but as we have…
Mirrored original, added cable tunnel
IKEA Kallax - Kabel- /Schlauch-Durchführung für min 22mm Bohrung / for a min. 22mm hole Muss auf beiden Seite angeklebt werden / Must be glued on both sides
Tunnelplan Clip for a heat pump cover. The outdoor unit of the heat pump can be covert with an attractive wooden casing. It would be nice if a noise reduction could also be achieved with this. However, this requires a sound-damping…
Combine this as Negative Part with the Basseplate of choice. for Baseplates up to 16cm, don't scale as LEDs wont fit. Print in transparent with no supports For Mini LED Stripes like these…
STL files added (18.05.2025) Printed in PLA, 0.2 mm layer height. Total need of filament: ca 68 meters Total cost of filament: ca 5,1 €
![CABLE-BRIDGE / TUNNEL ____ [3x 9.5mm max diameter @ 100% Printsize]](https://media.printables.com/media/prints/853284/images/6562777_0d956e6a-76bf-4e2b-a3a0-05b77ad53d79_7ff7b082-164e-4b1f-a770-947d2d603248/photo_2024-04-22_11-14-27-3.jpg)
![HEAT PEDAL TO THE METAL BOARD GAME ORGANIZER (SUPPORT BOOTH HEAVY RAIN AND TUNNEL VISION EXPANSIONS!) BY AM-MEDIA.BIZ [TABLETOP BOARD GAME INSERTS SKU: HEAT001]](https://media.printables.com/media/prints/1224201/images/9178202_ed271907-aa31-42e7-a35d-b6526896aa05_f133cd1e-18b2-49cc-a3e6-807f6576ea6c/1.jpg)
