K1 Lid Riser corner with bowden tube tunnel - JC-Creality K1 Lid Riser MOD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesign of rear right corner element to fit bowden tube
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 288
- Wydruki
- 1
- Wyświetlenia
- 1781
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
After modifying my K1 with the side spool holder and filament sensor bracket from MDFPereira (https://www.printables.com/de/model/507110-creality-k1-side-load-spool-holder-version-2) I also wanted the lid riser assembly from @Joe Cooper (https://www.printables.com/de/model/520207-jc-creality-k1-lid-riser).
After printing and assemling the lid riser kit I found that the bowden tube ,which connects the filament sensor and the extruder, was bend to hard in the rear right corner. So therefore I remixed Joes corner element to fit he bowden tube through it.
Now the filement can run smooth in the bowden tube.
Many thanks again to Joe and MDFPereira, they did a realy great job to improve my K1 setup.