Liczymy pasujące modele…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Original spool holder modelled from scratch. Need more tolerance testing. Can be used as start for modding
This riser is mounted and assembled using M3 screws making it rigid and reliable. Also, it is easy to print with high quality. You will need: M3x30 - 4 M3x5 screws - 8 M3x4.5x3 heat inserts - 8 Vents are not needed (but can be added) if…
Its a standard size buffer tube as the original one with the blaster is a little smaller then i'd like. Print with attachment point on the plate and print upwards. Good for getting some brighter colours on the blaster and its free. Use an…
This is my take on a minimalistic portable mesh node for the RAK19003. Prints with no supports! Battery life is well over a week. Bluetooth companion went from from 90% to 75% in 7 days with several flood adverts and 1-3 messages sent…
M4 NUT KNOB I made it compatible with Creality K1 Max by raising the part where the nut goes in. I don't know if it is compatible with K1 or K1C. THIS IS A REMIX original version: https://www.thingiverse.com/thing:3925483
(THİS MODEL NOT TESTED YET) İf you decide to print it please contact me about its perfprmance so ı can improve it sadly ı can't test ıt because ım out of ABS filament. Print it with ABS for best results
I designed this for deploying Meshcore repeaters in a tidy, quick and repeatable manner. This mount is for attaching a RAK19003 PCB to the grid plate you can find on my profile. The PCB is secured using the M2.5 bolts which come supplied…
This is a bottom panel for your Rook MK1 Printable in 4 pieces on the rook itself. The M3 screws to the skirts hold it in place, so you might want to get those as well. (they are not printable on the Rook MK1 yet, working on it) The M5…
... Category: Tool Holders & Boxes
Magneten: https://www.amazon.de/gp/product/B06X977K8L/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1 Category: Other
Clio Mk1 - Painel Support Button Flashlight, Desfroster
This remix allows you to fit the LIBRA extruder without trimming 2mm off the K1 toolhead carriage, however instead you will need to trim 1mm off the side of the orbiter gearbox housing. Caution. This may allow oil or dirt from the gearbox…
This adapts the corner piece of the original file to allow you to mount the filament sensor along the riser. Tony F's File was adjusted to allow the filament sensor to be mounted, the other files were used as references and deserve credit.
Note:- The rear portion that attaches to the printer is included ‘ONLY’ in this download set. If you decide to use one of my other alternate cover designs you will need the back plate from t his Version .…
Want to add more capacity to your Zius Mags but don't want to cut the stock spring rest, try this piece! Add a pop of color to your mags and raise the capacity from 12 to 15. Can hold more but wouldn't recommend it. Make sure the first…
ESP8266: https://www.amazon.de/gp/product/B01E3CAVN6/ref=oh\_aui\_search\_asin\_title?ie=UTF8&psc=1 Sensor:…
I did a remix of two great designs to create a taller riser because my ptfe was rubbing on the glass after installing the cyclops extruder. You can print 4 corners without the holes if you are using the stock filament sensor. The text is…
if you use any enclosure or filament dryer this will be very simple and effective solution to close your printer spatially if you print ABS or similar material
This riser is mounted and assembled using M3 screws making it rigid and reliable. Also, it is easy to print with high quality. You will need: M3x30 - 4 M3x5 screws - 8 M3x4.5x3 heat inserts - 8 Vents are not needed (but can be added) if…
Hey guys, complimentary to the shim posted by “NeedItMakeIt” here, I designed those shims to level the bed in it's back corners (those corners are hard to level using only the 3 leadscrews as adjustment). They are designed to be placed…
I raised the height to allow the filament tube to be outside the chain, this allows the tube to be less crunched.
Arcade For Switch Mk1 and Oled With Buttons Board /!\ The plate 4 is for the non Oled version /!\ Print on place , 15% infill , no supports required. Add with Board Buttons Please clean your Bed thoroughly and check that it fits properly.…
If you like my work consider supporting me on boosty , thank you.
Hi guys, We all must give BIG THANKS TO Justin Fritz because he was the person who asked me and helped me a lot to make this model together. I don't have the latest revision of the K1 MAX, but with the help of his tape measure and a few…
This is a bottom panel for your Rook MK1 Printable in 4 pieces on the rook itself. The M3 screws to the skirts hold it in place, so you might want to get those as well. (they are not printable on the Rook MK1 yet, working on it) The M5…
Disclosure: Although the license for the 270 hinge adapter is restricted I have received permission from @Diablo_1609422 to remix it, which is located here K1C Adapters for use with V2 and V3 270 degree hinges . The license is why it…
Slightly tweaked mount for the BTT Eddy to use the LIDAR USB header on the tool head of the Creality K1 series
To have this properly fit a K1 SE, you'll need to print the parts below: Cable Links x24 - https://www.printables.com/model/827586-creality-k1-cable-chain-sagging-fix Front chain support x1 -…
This thing work as is but I still have to add assembly instructions so consider this a WIP. Improvements might also come along the way, I'm planning on making a less naked version of it. This mod allows you to install Creality K1 series…
I wanted something simple to hold the door when it's all the way open with the 270 hinge mod. The original by Derrick printed great, but I discovered it doesn't work with the version of the hinge I printed (Diablo's + my own remix). The…
LID RISER V3 [FRAME EXTENSION KIT] | Vents | LED Strip | Hinges *If you have any issues with printing or assembly, feel free to message me, and I'll do my best to assist you 😉. /////ATTENTION *Because of the seam inside the walls, the…
Conjunto de anillas para instalar una cola tipo Vixen en la parte superior del tubo skywatcher mak180, una de las anillas dispone de soportes para anclar soporte para buscador. El conjunto esta impreso en ASA. Se recomienda imprimir la…
This is a modular case for the RAK WisBlock Starter Kit with the 19007 baseboard. The idea behind this project was to make a simple-to-assemble and customizable case and also eliminate screws, washers and fasteners other than those that…
Hi guys, I did this project to make a frame for the K1 LCD, the printer is originally with buttons but I managed to buy just the K2's LCD from EasyThreed on AliExpress, just need to say that your K2 LCD was broken, I paid $7 for him. It…
This 4010 extended blower duct is specifically designed to optimize airflow for the K1 CHC (Ceramic Heater Core) Hot End , seamlessly integrated with the Toybox Alpha 3D Printer's stock fan location . The duct channels airflow efficiently…
After spending a solid week dealing with the drag chain issues on my Creality K1 Max—caused by low tolerances in the chain's joints—I began testing various user-made solutions on Printables. Some worked, while others didn’t. Ultimately, I…
Rigid Bed Mounts for K1 or K1 Max when PRTtouch sensors are removed and Cartgrapher 3D or other eddy sensor or touch sensor on tool head is used. Option for silicon spacers or Magnets with 10mm Kossel Steel Balls M4. Magnetic Mounts…
Hello fellow nerfers! This is SKLEP mk1, my free time project I've been working on for the past month. This is a single firing string blaster that uses (and ejects) Flypoint/ Kirin shells. It fires half length darts. You can still use it…
I've used this model since the first few days of having my K1 Max. I had to rearrange my print space in a way that continuing to hang spools off the back of my printer was no longer feasible. However, moving to the side mounts readily…
Simple tip holder for electrolux vertical vaccum model STK13A.
This part aims explicitly at vibration noise damping of the printers bottom plate in a very primitive fashion - by pressing the plate upwards from the outside. In my case a damper between 24mm (minimal) and 25mm (best) does the job. A…
Print in place Simple clip-on to clean the filament before the extruder. The hinge will feel blocked. Once the resistance is broken, it moves perfectly free. Support needed. I know I don't like it too. Countermeasure would be to cut the…
MODEL FILL MUST BE ABOVE 30% ABS for the best result Don't forget to support me, ı want printables T-shirt
Upgrade your K1SE with side panels or repair your K1 / K1C / K1MAX I recommend using the plain panels if you plan to print high temp filament or want to keep the sound and fumes down, but have provided semi-open designs to combat heat…
Instructions can be found in the folder of this project (Other Files). Please note, this modification is compatible only with our Riser. Versions of the Riser: K1 Series - Riser V1 K1 Series - Riser V2 Add-on for the Riser K1 Series Spool…
Instructions can be found in the folder of this project (Other Files). Versions of the Riser: K1 Series - Riser V1 K1 Series - Riser V2 Add-on for the Riser K1 Series Chain Riser K1 Series Spool Holder for Riser Important: This model has…
Please note, this modification is compatible only with our Riser. Versions of the Riser: K1 Series - Riser V1 K1 Series - Riser V2 Add-on for the Riser K1 Series Chain Riser sprintech.net Happy printing If you like what I do, you can…
This easy mod is a simple yet effective way to extend your lead screw service interval by protecting it from getting covered by debris that may get blown off the bed when the fans are running, especially during a nozzle wipe or a failed…
I was annoyed with the bowden tube's awkward bend, being attached in the back of my K1 max, while I had changed to a side-mounted filament spool holder. So I made this over-engineered bowden tube side-mount. It's best to print it slow, as…
There are 4 different options: 2 simple inserts, and 2 one-piece designs that raise the printer. The stiffening feet inserts are a great first mod, without the need for tools, experience or fancy print settings. Simply print 4 inserts and…
osVAC adapter for the SEBO AIRBELT K1 CREAM . Should also fit other Airbelt models, perhaps even other SEBO vacuums, post photos if you can test this and I will update the description! If you need it: CAD (Onshape) Happy Hacking and don't…
This is a lighter version of my original clip from here . I shortened the clip on the left side. This resolves an issue on my printer with a sagging cable chain and these clips hitting on the XY joints and Y rods. I upload two versions:…
I don't why couldn't find any mount for nebula on k1se so I decided to make one and buy it :D you're gonna need 2 of the 3 screws you removed from the bed/z axis when you bought it(i didn't wanna goi outside look for the same size of the…
I had the problem on the K1C of the tool head opening the door when homing, I don't wanted to cut the stock top hinge so I printed this piece 100% infill using ASA CF see original:…
I started using ABS and PETG a lot in my prints and started noticing funky smell during and post print without realising that these filaments give off some nasty fumes. Previously I conceptualised and came up with Tingkat - Creality K1C…
In the second version I removed the ugly step :)
Follow me at X.com/@Booleans_Things Help me keep making amazing models, for only a dollar! https://ko-fi.com/booleansandthings Leave a make showing off your color and material choices! !!MODIFY AT YOUR OWN RISK!! If you have any…
This is a rear Purge shoot and rear deflector for the K1 Max. This shoot needs modifying of the rear panel in order to use it. I used a 30MM Hole saw to drill the hole where the filament spool goes on the original Panel, Once I drilled…
I designed it use the back and middle screw holes instead of relying on the front to allow me to keep these free for hinge mods which are common for this printer. To attach it to the side you will need 3x M3x12 bolts. The holder will hold…
There are changes in the mounting screws lengths, so take this into consideration. VOYAGER_MK1_NEW_BATTERY-HOLDER_LIPO_60C - require normal supports on build plate All other objects require NO supports - pre-supported by me if necessary.…
Wanted to add a button to the blank plate, without ruining the original. Made to fit the “Toma Car Parts 40.284 12V 16A” push button switch (EAN: 8715647806183). Also included a blank plate. Dusty Placeholder picture, to indicate location…
I am a huge fan of Star wars and the Mandalorian. Couldn't find one already made so tried my hand at making one. I didn't do any fancy just default setting. I used PETG at .16 layer height. Hope you enjoy.
Heated air is directed into the glass without overheating the plastic panels of the printer, the heater power can be adjusted in the settings max_power: 0.6 - if the hot part of the body is printed from Polymaker Fiberon PA6-GF25, if ABS,…
This is a simple quick to print waste tray that slides under the printer. Its best paired with my other mod such as the waste chute. Helps keeping the base of the printer clean and gives you a place to put all the purge lines.
Lets save our K1s :-) This is my linear conversion for X axis. Every version i found was complete makeover. Not this one. This is cost effective coz you reuse most of your stock hardware. Designed for STOCK or POWGE idlers. No software…
config setting [bed_mesh] speed: 300 horizontal_move_z: 2 mesh_min: 30, 30.5 mesh_max: 225, 225 probe_count: 6, 6 zero_reference_position: 128.00,128.00 [scanner] mcu:idm speed: 10. lift_speed: 10. backlash_comp: 0.5 x_offset: -8.9…
This is a support for Xdrive Mini attach to SK16 in hover Sim Racing DIY - This project is for compact base.
This remix provides a trimmed Silicone Nozzle Cleaner for Creality K1/K1C/K1 Max based on this model, in order to prevent collisions with the HEPA filter adapter available here . Collisions are avoided when the cleaner is both down and…
Its quite easy to make, letters might need a bit of a sanding, cause its a snug fit, or scale them a little bit down, with touch of glue, they will hold ( i didnt glue mine, they fit perfectly) , Use wood screws and few big enough washers…
Use same printing as recomended by the original. Remixed in Autodesk Fusion.
______________________________________________________________________________________________________________________________ Main features: Half length dart compatible K25/K26 spring powered Real steel-esque proportions Working…
Z軸ガイドに本体へのボルト固定穴を追加した物です。 本体への穴開けが必須ですが固定はより強固になります。 キャリッジはガイドクリアランスを従来の半分に詰める事でガタを減らしています。 相変わらず「K10では出力出来ない仕様」ですが...。
Printed at 0.16 layer height. Used tree supports and it worked out very well. Sorry for the bad picture.
A remix of the Stream deck mount for Corsair K100 or K70 RGB for better stability
Celebrate a European automotive icon with this 3D printable STL model of the Volkswagen Golf Mk1. This classic hatchback model is perfect for automotive enthusiasts and fans of retro European cars, offering a beloved piece of automotive…
05/06/26 - Check out the new MK1 5.56 model . It is an extension to the MK1 that uses M4 AEG magazines and introduces a new adjustable stock! The MOSQUITO by HYBRID ARMORY is a 3D printed airsoft platform purposefully designed to be super…
Print any of the elbows with supports, Iv found that tree supports work the best. Iv printed these out of sunlu matte high speed petg. Print the sleaves out of TPU with supports.
I created this project within Orcaslicer because I felt the need and wanted them to improve my project with the K1 extru
i wanted something to mount the k1 camera inside my vorons so i designed this mount to connect to the top of the printer extrusion to ensure the camera was out of the way for monolith awd. the k1 camera is 1080p 30fps and can handle a 70c…
a monitor mount for the rk1 sim rig needs M12 2PCS, 70mm https://ar.aliexpress.com/item/1005008081039320.html?spm=a2g0o.order_detail.order_detail_item.7.74e0f19c8F03Pa&gatewayAdapt=glo2ara
3 perimeters 15% infill Printed with PETG No supports required Iron top surfaces (optional) EDIT: Replaced model file with corrected file. Original file had mounting holes at 5mm apart, but was not on a 5mm grid. Changed spacing for 5mm…
The Berker K1 frames have a special rectangular format. Standard Berker adapter frames for 55mm square switches don't fit with the Meross switch cover. Therefore I needed to design a custom switch cover. The cover snaps perfectly into the…
I noticed normal Glock mags have a smaller base plate than the original WE Glock19 WET mag, making it harder to grip in the large mag well, this base plate is designed to be the same size as the original, allowing for better grip on the…
I recently upgraded to DXC extruder on my K1max. This extruder has a filament sensor, and the wires are attached to the MCU from the back of the toolhead. In addition, the motor connection to this extruder requires an extension cable…
updated version. Don't need sticky velcro to hold it in place.
A model of a 1968 or "Toob" ACA hurricane & ACA HURRICANE 130 MK1 that can be put on a Lego axle (file is now fixed)
cover for front towing eye for skoda fabia mk1 (may fit more models, since vw shares parts like this acros multiple models and generations) aditional hw: 2x DIN 912 - Hexagon socket Head Cap Screw - M3x40 (or more) 2x DIN 982 - Prevailing…
Print the top cover in anything you like and the feet in some sort of TPU. The top cover is held in place by friction, so the tolerance is small. To reduce the chances for the feet to break easily, increase the walls to 5 and infill to…
![CREALITY K1 MAX - LID RISER V3 [FRAME EXTENSION KIT]](https://media.printables.com/media/prints/1113589/images/8603616_60a7f138-6ba6-4188-bbf6-cdb880ec998a_f4300ca9-7596-4f4e-9ef3-f72931737ef2/k1max_projects_covers.jpg)
