D3vil Wears Prada For K1 Series Creality
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
allegedly the most stable and best looking shoes in the market !!
- Ocena
- 4,949 / 5
- Polubienia
- 509
- Pobrania
- 2309
- Wydruki
- 44
- Wyświetlenia
- 12 177
- Oceny
- 39
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Enjoy the sight of a better frame stability (Not tested for K1 Max)
Preferred to be printed in PLA+ , Hyper or PETG .. it’s a perfect fit so printing it in ABS will shrink and might not fit properly.
Important:
Fits K1 and K1C perfectly .. NOT recommended for K1 Max… it will only fit with the Base screw ( side screws wont fit and as reported it will cover the power switch)
Those shoes should not extend beyond the existing screen, so in regards to footprint they should be good , and would provide a better stability and frame support since they hold and wrap around the frame from the side not just below.
Parts needed:
M3X10 for the side screws (Panels)
M3x16 to mount it to the base
and maybe you will need a longer screw for the rubber .. i didnt change mine.
Need support or have questions? Don't worry, our support channel is here :
Discord Channel