1 / 5
Creality K1 0.2mm Nozzle Profiles (for minis) (Orca Slicer) — zdjęcie 1
1 / 5

Creality K1 0.2mm Nozzle Profiles (for minis) (Orca Slicer)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Profiles for printing minis with a 0.2mm nozzle on the Creality K1. No layer lines and really smooth surfaces.

Ocena
5 / 5
Polubienia
139
Pobrania
3415
Wydruki
2
Wyświetlenia
7857
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Y'all know that FDM printers are not ideal for printing minis but hey, it's possible, and you can get pretty damn good prints if you tune it correctly. 

Main things I've noticed made a difference were : 

  • Layer Height, of course
  • The printing speed. It can't be super slow, but it can't go super fast either
  • Temperature, basically the default one
  • Adhesion: use brim
  • Supports: you don't want to add too many, otherwise the print itself will break

I'm by no means claiming this to be the ideal profile for this kind of thing, but I've got awesome results with these profiles, really smooth in some places. The main goal here is to be able to print minis without visible print lines. 

The minis take around 2-4 hours to print each, depending on the model.  I've printed them in PLA, printer closed, on a regular wooden table. The printer shook a bit but it didn't seem to interfere with the results. Make sure that you're using some trusted and smooth PLA brand so that your nozzle won't clog given it's smaller diameter, filament quality is really important when you're printing in fine detail. 
 

To import the files you can use the normal import function under File -> Import -> Import Settings, or you can add the files yourself to the %appdata%/OrcaSlicer/user/default folder

Let me know if it worked for you guys! 

Tagi