Liczymy pasujące modele…
Did not want to uselessly buy corner brackets, these ones are exceptionally strong (especially since they are printed with 4 walls). I am using mine for my DIY 2020 system laser cutter. I have found that w/ 4 walls, these make a PERFECT…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
I've designed a collection of simple, round plant saucers to complement your gardening needs, focusing on both aesthetic and functional versatility. Each saucer features a unique rim profile, allowing you to match it seamlessly with…
Wydruk około 8,11 €–9,91 € nettoWstępna wycena jednego wariantu
MK4 / Mk3.9 Upgrade parts but laid out on MK4 with Input Slicing 0.4mm nozzle PETG. Prints 40% faster at the same quality. Original MK3 version takes 2,384 minutes (39.7 print hours) per set. This version takes only 1,434 minutes (23.9…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hope this little Snowman brightens your day. Happy printing and holidays :)
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Do you still have a stock MK3S or MK3S+ and need a bit more speed out of it for day-to-day stuff? This is the answer. This is my 0.32 layer height profile for 0.4 nozzles with every tweak I could come up with and I also included my custom…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Eyeballing the keycap profile is really annoying. Therefore, I went and did this tool to help you identify the correct row. This is meant for Cherry profile keycaps . Feel free to reference https://www.keycaps.info/ for the profiles. If…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Can be fitted without dismantling the Prusa (see photos for various dovetail guides). The V2 version requires no pliers. Important: Layer height for printing 0.1 mm Use 2 M4x20 or M4x12 Screws to mount Kann ohne Demontage des Prusa…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
*DISCLAIMER: This is a Work In Progress Project, so STL can change I want also to thank Perinski for the idea of the design of case, which is simple and it inspired my design, I suggest you to watch his designs on the following page:…
Wydruk około 4,32 €–5,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a hidden screw-in wall cable clip with straight and right-angle options, with variations for cable diameter and screw cap. Design features Straight and right-angle options allow you to route the cable almost anywhere on a wall.…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
I loved Cunfusu's original model so much that I designed by own variation. My version is lower profile. It is ideal for keys that you almost never want to press. I use it on my “NumLock” key. No supports needed. MMU optional.
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Slightly enlarged so if won't wobble and can easily hold a tool e.g., a spatula.
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pipe Rosette Low Profile - no supports needed - just print and press the parts together! Pipe dimensions Ø18 mm, Ø22 mm - but I can create other dimensions as well Filament used Filament PM PLA+ SKIN 480C Print settings Layers and…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
This stand is perfect if you prefer to keep your Framework 16 on your desk with the lid closed while maintaining optimal thermal performance. The design preserves the laptop's low profile while creating necessary clearance underneath for…
Wydruk około 6,47 €–7,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hey Guys, Here are my Creality K1/ K1C/ K1 Max/ Orca Slicer , Quality, Speed, and Stealth Profiles for 0.4 Tested on K1, K1 Max, K1C Hotends. (Standard, CHT, Unicorn) If you are using the RetroGlide Gantry Mod You can find my latest…
Hello, I've created a low-profile bracket for this annoying 25mm fan. This is the second version of the bracket. I'm sharing the model now because I finally received new fans and was able to properly test its performance and it works as…
Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…
Changelog: 4/25/23: Added Overture High Speed Clear TPU. This one can print as fast as 10 mm^3/sec. Do not confuse this with regular Overture TPU! Did extensive tuning on this to reduce stringing and maintain best possible quality. Added…
This is a port of https://www.thingiverse.com/thing:2503622 , by mightynozzle. I do not claim ownership of the model . I had a hard time finding something like it on printables, so I ported it here. The following text is taken straight…
I have designed this profile for LED strips up to max 15mm wide. The beam angle is 45 degrees, making this profile perfect for indirect lighting. The fit is perfect and the diffuser snaps into place on the side without the need to use…
Magnetic Bit holders for the trays that come with the Milwaukee slim low profile packout compact organizers. Uses 6x2mm magnets https://www.amazon.com/dp/B07KJ9H31P?psc=1&ref=ppx_yo2ov_dt_b_product_details Super glue the magnets on the…
EDIT: I designed the regular height organizer square bin as well. EDIT2: And the regular height rectangular bin. EDIT3: And I designed a divided regular height rectangular bin with removable dividers as well. EDIT4: Added center bins that…
This design is now open for remixes, please give attribution and link your remixes to this page! I'm happy to link back to remixes or add them on this page to keep everything in one place. Update 31 December 2024: Added a shell option for…
2020 3Ways Connector CUBE Corner Bracket for ITEM 2020 Profile Available in two versions: Blank M4 Treaded Suitable for: https://www.item24.com/en-il/profile-5-20x20-natural-37003#description All our designs are free to download and use.…
This is a hitbox-layout low profile fightstick. It uses Kailh low-profile (choc v1) mechanical keyboard switches. Should be printed at 0.20mm layer height. Prints without supports. I used an Arduino Pro Micro clone, but many other boards…
I needed a right angle screwdriver handle that could fit in a very tight place and none of the things shared online was small enough so I quickly created one using Blender. I shared the .blend file if you want to remix it so it better…
Gusset Bracket - 2020 / 3030 / 4040 / 5050 Profile Suitable for: 2020 -3030 -4040 -5050 V-Slot T-Slot Alu profile 20x20x20mm 30x30x30mm 40x40x40mm 50x50x50mm Resize to adjust dimensions All our designs are free to download and use—because…
High-resolution STLs for a variation of Chicago Stenographer low-pro keycaps (Choc stems). Perfect for compact keyboards like Ferris, Corne, Kyria, Lily58, etc. Generated using modified code from…
The Slimbox 2040 is a stickless, all button, low profile fightstick, remixed from the original Slimbox by jfedor . The following changes have been made with the GP2040-CE firmware and quality of life in mind: Built as a cheap alternative…
Contiguous United States (Lower 48) Topographic Map with Hydrographic Features For those times when you just want to print everything at once – this is the lower 48 states in the USA of Plastic project combined into a single model. Lower…
T-Slot Nut M3 / M4 / M5 / M6 Thread / Twist in fixing nut for PRUSA Alu Profile -Update 24/01/2025: added Tslot Fixing Nut Prusa Alu Profile.stl Scale/Resize to adjust dimensions All our designs are free to download and use—because…
I have a lot of scanners on the production line I manage as an engineer. Most of them are Honeywell's 1950GHD which come with quite flimsy holders (oversized). I designed something that is a bit more tight and can be easily attached to…
This profile is inspired by a large number of other high speed/bonkers profiles for the Mini and the Mk4. I tuned this for use with PETG, since that is mostly what I print in. But, I have tested it with some of the PLA filaments I have…
Remixed from: https://www.thingiverse.com/thing:4134048 Modified to work with my Havit keyboard. The original design didn't fit; the legs were a bit too close together and short to fit and stay in the switch (I understand this is a slight…
Wall mount clamp /bracket / holder for 2020 Alu Profile - Fissaggio a muro per profilo 2020 Update: 04/02/2025 added - Wall Mount Clamp for 2020 Alu Profile_Cover.stl Suitable for:…
This profile was tested on a Bambu H2D using Bambu Studio 2.5.0.66 on a engineering plate using Magigoo PA as adhesive It was generated through exporting filament profile from bambu studio. Import by using File > Import > Import Configs…
The 3D model is a case for the Allium58 GLP keyboard. The keyboard is modified from Lily58 Pro. The bottom case can also be used with other plates with 1.2mm thickness. Parts to be printed Allium58 bottom case Allium58 bottom case…
Modified to fit with my other printed keycaps and added just the top so it can be glued onto the basic keycap from my project.
The holder for the Buddy3D camera is designed specifically for the MK4S 3D printer but can also be mounted on other printers with compatible aluminum profiles. It simply twists into the profile and features a "Snap-to-Fit" mechanism for…
Start G-Code: M211 S0 ; disable travel limits G92 E0 ;reset extruder G28 ;home M420 S1 Z10 ;use bed mesh G1 Z10.0 F4000 move Z axis G1 X-10 Y20 Z10 F5000.0 ;move to start position G92 E0 ;zero the extruded length G1 F200 E10 ;extrude ooze…
Elements to connect 2020 and 2040 profiles. Best printed in PET-G (for the increased layer adhesion). ==> Designed around M3 * 16 pan head screws and M3 nuts for the frontal angles and M3 * 12 screws for the side angles. Insert M3 nuts…
https://makerworld.com/en/models/783309?from=search#profileId-720729 please check the original creator for license
Sturdy Corner Bracket with Ribbed Reinforcement – Heavy Duty for 2020 / 3030 / 4040 / 5050 V-Slot & T-Slot aluminum profiles Perimetric reinforcing rib for superior strength Optimized profile geometry – better resistance and easier…
This is a mixbox-layout low profile fightstick. It uses Kailh low-profile (choc v1) mechanical keyboard switches. Should be printed at 0.20mm layer height. Prints without supports. I used an Arduino Pro Micro clone, but many other boards…
See Text file for settings, orcaslicer profile in the .zip. To add go to file-Import-Import Configs and it should add it in. It will only show under bambu p1s 0.4mm nozzle size To avoid confusion. the filament will be added under the…
I designed my Pwnagotchi case around my build: Raspberry Pi 0 W Waveshare v2 with "slim-agotchi" low profile mod PiSugar power pack with 1200mAh battery It's a snug fit that exposes the USB ports while the cover is dovetailed and slides…
Print with supports. Installation is a bit tricky. Remove two screws from the back plate, and two screws from the main board, then carefully push on the screen to make enough room to swap out the original buttons from the front. Fusion…
simple endcap fitting to 4040 alloy profile
Yet another simple mgn12 rail to 2020 aluminum profile centering protractor. All tolerances have made to have "tight" fit on rail and profile (if you have normal calibrated printer of course ;) )
The cut-out on the back allows the included usb cable to be routed and protects it from moving into the area that must be kept clear of metal. This is designed that the cable can easily be routed after the carriage has been fitted. It…
Raspberry Pi 3/4/5 2020 Profile vertical - Stand alone / Cluster Supporto Verticale per profilo 2020 - Singolo / Cluster Resize to adjust dimension Update 15/09/2025: Added Rev2 Versions All our designs are free to download and use. Your…
Remix of the Shade Vertical Foregrip by LoneWolf052 with a monolithic body and the slim-top rail design for low-profile/non-standard Picatinny rails. Functionality, design and usage are identical to the original design. Prints in 2…
There are threee options with different diameters. 12, 10 and 8mm.
This life tracker for Magic the Gathering is made to fit inside an Ultrapro Satin Tower and leave room for extra dice and spindowns. There are two different version of the number tiles for the life tracker, one with raised numbers, and…
(For smaller illustration models, look here: https://www.printables.com/model/675613-steel-profiles-illustration-models ) All STL files are according to standards shown below. Print info: - All stl's are 100mm in height - Print upright,…
Easy to print, low profile hide-a-key box. No supports needed, but I would recommend using a deburring tool or sandpaper to trim around the edge of the lid, so it slides easily but is not too tight. STL files are designed for the 3mm x…
Might also fit other cameras ? I printed this in TPU95A with the finest settings my printer allows, and it fit perfectly with a bit of a push+screw action when installing. I am also sharing the FreeCAD file in case you want to modify it.…
I made feet for my BLV MGN Cube printer. Can be used on other project as feet for 2040 AL profile. Print material: PLA Supports: No
This is a slim, low clearance LED strip holder for RGB/neopixel strips WITH the clear Silicone coating. I found a few diffusers that only fit the PCB strips, but were too small for the ribbons with the waterproof Silicone. Works well.…
These are round low profile button caps in various sizes designed for FDM printing. A cross stem has been utilised, making them compatible with devices utilising MX/Choc V2 switches. These have been designed to match the button holes used…
This clamp is for a StreamDeck (MK.2) to mount it to a 8040 alu-profile on your simrig. Print this part with the big opening down on the printerbed. So you don't need any support and the clamping face will get a good fit. There is only…
Use socket head screw and T-nuts 20x20 --> M6x10 30x30 --> M6x12 45x45 --> M8x16 You can always use longer screws with washers. To support my work → https://buymeacoffee.com/giacu92
A modified version of the Radial Lizard, made to be less likely to catch on clothing. The mesh is a bit scuffed, but it prints fine. All credits go to the original author (Jimothy Perkins, according to ctrlpew.com). Links to the original:…
As simple as it should be :) (if the notch is too big, feel free to inform me, and I would repair it for you) UPDATED 4/12/22 New version with profile shape, more snug-fit and sleek.
Note: when trimming this profile to length in the slicer, please don't use the scale feature since this would mess up the threaded hole. Use a Z cut instead. This is a 3030 aluminum extrusion profile optimized for 3d printing. This is…
Festool MFT Wall Profile This is an adaption of the Festool MFT Profile that can be screwed to the wall to create custom wall storage for unused MFT-Accessories. I have also created a holder that can be connected to the profile using a…
Profiles for the Sovol Zero in OrcaSlicer, PrusaSlicer and SuperSlicer, generated from one source so all three slicers ask for the same speeds and accelerations. An optional Klipper macro pack adds bed boost for the chamber preheat, a…
Print in PETG or ASA. For PETG we highly recommend treating the part in Dichtol AM Hydro for guaranteed water proofing. Thick walls(4-5 lines) and standard infill. Slightly over extruding can help fill the voids in the layers. Bill of…
End cap for an aluminum profile 20x40mm B type
Low profile 2020 corner brackets. Couple of options
Este adaptador foi usado como alternativa temporária às caras porcas M5 para perfis 2020 disponíveis no Brasil. Infelizmente as porcas M5 para perfis 2020 disponíveis em lojas chinesas e americanas (padrão europeu) não funcionam neste…
I printed it with PETG Prusament and 3-4 perimeters for stronger walls. It could be PLA. PETG is flexible.
This is my design for Logitech Z407 speakers that allows low profile horizontal mounting of the speaker using the upright mount position. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15-25 Filament: Uzy Galaxy Black PLA
High profile bracket for Nvidia Quadro p400. The mounting screws cut threads into the plastic. First wanted to add nuts, but I don't think it is needed. Embedded cylinders for extra rigidity, it really helps with holding GPU in a place…
This little mountain business card holder is the perfect accent to your business! Use this snow capped mountain peak to display your business or personal credentials to your customers. If you want to support me or get a commercial license…
UPDATE 2024-04-03: I added a version for mounting on 4040 or 4080 profiles with M6 or M8 hex screws and T-nuts. For printing the VRS-BOX_4080* files, choose “Split → To objects” in PrusaSlicer. Then arrange the printing orientation…
Prusa Mk3S+ Mosquito Magnum with MMU3 Settings/Profiles PLA_PETG Now we can enjoy the magnum on the mk3s+ with the latest R6 release. V2 Update Updated parts for more room and now every STL is included now. V3 UPDATE After weeks and…
This is my 2nd cycloidal drive, which has a few more non-printed parts but in exchange is much more robust and reliable long term. It is optimized for having minimal parts for ease of assembly and maximum reliability. This drive also has,…
This low profile set fits on most hot swappalbe x stams of keyboards. The letters on the keys are hollow with thin holding strips for (otherwise) floating parts in a letter. When printed with white filament, the light caps are all shine…
Corner Brackets for Profile Systems Enhance your projects with our versatile 3D-printable corner brackets, designed to fit a wide range of aluminum profile systems. These brackets are available in four sizes: 30mm x 30mm 35mm x 35mm 40mm…
V Profil Eckverbinder Set um Kanäle nicht nur in einer Schleife zu legen, sondern auch um z.B Pfeiler zu überwinden, Kanäle auch von der Decke nach unten oder von unten nach oben zu verlegen. Geeignet für diese Profile Chesbung 15Pack LED…
These are generated using the excellent gridfinity-rebuilt-openscad by kennetek. MF: Gridfinity bin at 42% scale, the same size as Machenna56k's Minifinity. Print these flat with the stem facing up (reduce stem tolerance) with…
50mm rocket profile anti-rocker wheel that I designed for a friend. Category: Sport & Outdoors
This function keycap is designed to prevent accidental key presses from the front of the key. Compatible with keychron Low-Profile Optical switches. Remake of Anti-Accidental Keypress Function Key -…
Yet another simple mgn12 rail to 2040 aluminum profile centering protractor. All tolerances have made to have "tight" fit on rail and profile (if you have normal calibrated printer of course ;) )
Needed a palce to put my macbook in the living room when im not using it, so I remixed the other bracket to make a low profile option. I put clear tape over the screw holes to protect against scratching Mirror the bracket in your print…
This allows mounting a Virpil Mongoose CM2 base to a piece of upright 40x40 profile. The profile is offset enough to connect the 5 pin din connector, but not the AUX connector which is directly behind the profile. There is also a USB…
FreeCAD source codes are parametric.
right angle joint aluminum profiles Design for 20mm square profile but scale for other Print Settings Printer: Creality Ender 3 Rafts: No Supports: No Resolution: 0,2mm Infill: 20% Filament: any pla any Category: Parts
Low profile variation, needs no alterations to the grounding strap.
This is an assortment of different mounting brackets for the 20x20 mm aluminum strut (beam) with 5 mm groove, by RS PRO . These were made to create enclosures for optical setups and are therefore made to fit upon optical breadboards with…
Solid-Spool-Holder for 20X0 profile (lying version) Easy printable, very simple and solid spool holder with bearing assisted rolls to mount on top of any printer made with 2020/2040 profiles. Requires: Bearings M5 screws T-slot nuts
I designed these caps to replace the lost originals. They adapt to the upper profile of Deluxe, Premium, Fun or other model Rollups, like the one you see in the photos.
I'm planning on adding matchstick LEDs to my Voron 0.2 and needed to recover some space above the Bento Mini in order to fit them on that side of the printer. This splits the original mount and lowers the entire filter.
This solution is specifically designed for the following: Virpil CM2 or CM3 base Virpil 200mm extension pipe AND Virpil Z extension The Counter Weight works near 0 degrees for the Constellation Alpha grip. Mine was 0.1 degrees off center…
These are square low profile button caps in various sizes designed for FDM printing. A cross stem has been utilised, making them compatible with devices utilising MX/Choc V2 switches. Sizes available: 1U - 18x18mm 2U - 37.1x18mm 2.25U -…
Prusa MK Series 2020 Tslot Locking Brackets/Clamps - Staffette blocco Prusa Serie MK Resize/Scale to adjust dimension All our designs are free to download and use. Your support fuels our creativity. If you downloaded and enjoyed this…
Led strip mounts for mounting the Philips HUE led strip behind an L profile, for a few different mounting angles. The dimensions used for the strip are:
Made to have the printer closer the the top shelf. I don't have much head room in my print rack / farm .
Just some key caps. I type Dvorak and hated the profile on the stock keyboard so I went with all low profile. Printed at 0.1 layer height with 0.2 nozzle. Need to do some more settings changes to make them more transparent.
It's possible to print these in PLA using the same instructions found in the original model that this one remixes. But the keycaps in the pictures were printed using MJF and PA12-HP Nylon (dyed black) from JLCPCB.
