Low Profile LED Strip Diffuser (2020 Extrusion)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a very slim diffuser that would keep the LED strip VERY close to the 2020 rail so it wouldn't interfere.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 192
- Wydruki
- 2
- Wyświetlenia
- 2168
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a slim, low clearance LED strip holder for RGB/neopixel strips WITH the clear Silicone coating. I found a few diffusers that only fit the PCB strips, but were too small for the ribbons with the waterproof Silicone.
Works well. Easy to snap into place.
Print Settings
Printer:
FLSUN i3 2017 Customized
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
0%
Filament:
Overature PETG
Clear
Notes:
Import the model, and scale your Z to how long you need.
For Cura, use "Spiralize Outer Contour."
Other slicers use "Vase Mode"
Remove top/bottom.
Designed and printed for 0.5mm nozzle. Should work just fine with 0.4mm nozzle. 0.6mm might be a bit too snug, but you might want to test a small section depending on your printer's tolerances.
Category: 3D Printer Accessories