Low Profile LED Strip Diffuser (2020 Extrusion)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a very slim diffuser that would keep the LED strip VERY close to the 2020 rail so it wouldn't interfere.
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 192
- Makes
- 2
- Views
- 2,168
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a slim, low clearance LED strip holder for RGB/neopixel strips WITH the clear Silicone coating. I found a few diffusers that only fit the PCB strips, but were too small for the ribbons with the waterproof Silicone.
Works well. Easy to snap into place.
Print Settings
Printer:
FLSUN i3 2017 Customized
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
0%
Filament:
Overature PETG
Clear
Notes:
Import the model, and scale your Z to how long you need.
For Cura, use "Spiralize Outer Contour."
Other slicers use "Vase Mode"
Remove top/bottom.
Designed and printed for 0.5mm nozzle. Should work just fine with 0.4mm nozzle. 0.6mm might be a bit too snug, but you might want to test a small section depending on your printer's tolerances.
Category: 3D Printer Accessories