1 / 3
Voron 2.4 Beacon h (High Profile) X-Carriage Mount — zdjęcie 1
1 / 3

Voron 2.4 Beacon h (High Profile) X-Carriage Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple mount to allow mounting of the beacon h (High profile) to a voron 2.4

Ocena
0 / 5
Polubienia
43
Pobrania
263
Wydruki
0
Wyświetlenia
2200
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

 The cut-out on the back allows the included usb cable to be routed and protects it from moving into the area that must be kept clear of metal.

This is designed that the cable can easily be routed after the carriage has been fitted. It replaces the capacitive probe.

2 metal m3 threaded inserts required for the 2 holes where the beacon is mounted. Otherwise the assembly is the same as the original Voron part.

The offset from the centre of the nozzle to the tip of the beacon is 13.5. Use m3 screws with a low-profile head. The sensor does not put significant load on the part and thus this is sufficient. Furthermore this also prevents the screws from being closer to the build surface than the nozzle.

This part has been tested to a mesh speed of 200 in klipper without any issues. 

Tagi