Liczymy pasujące modele…
This is a remix of Cat Stretch by billyd. I used Meshmixer to reduce the mesh and create a voronoi pattern. I scaled it to 125% and printed it like that. If you would like to donate, please do it to the author of the original model as he…
V3.0 is the latest version and more compact due to the 90 degree turn i did with the probe
Compatible with enclosure as it acts as both camera holder and panel holder. To mount it, I used an M5X20 screw with an attached nut to make it like an M5X18.
I previously remixed another users door handle to mount in the bottom panel to lift and access the electronics bay. It was kind of chunky and the insert didn’t fit well so I finally got around to making a new one. I put the logos that…
I wanted to use Noctua's 5V PWM fans with my LDO Leviathan board, and in order to save space on the DIN rails, I wanted to use the Wago mount designed by Dr-Info. However, the mount only holds 2x Wago 221-413 terminals whereas I needed a…
There are already so many great options for mounting LEDs to our VORONs, however none of them were quite what I wanted, they either were o not much of an angle downwards or were designed to be mounted under the y carriage meaning I would…
Created this for my V0.2 to secure cables going up into the z cable chain with a zip tie.
…Please be sure to hit like & post a make, I'd love to see your prints! WARNING! If you do not know how to wire this system correctly & safely I STRONGLY recommend you DO NOT attempt to print or use this model as you are dealing with…
BigTreeTech SFS V2.0 Voron extended mount by 20 and 23mm lower The encoder puts a lot of resistance to the filament pull, and the extra loop on the bowden cable made the friction worse, and we don't like that. Here is a solution where…
Moved the display to the front when Clicky-Clack Door is installed. Otherwise parts of the display are invisible below the new 2020 profiles of the door. Add an extra 1mm to ensure the door can move freely.
TPU Voronoi Bracelet Add a unique, modern accessory to your collection with this flexible Voronoi-style bracelet, designed specifically for TPU filament. The lightweight lattice pattern provides excellent flexibility while creating a…
Voronoi See Through Bowl - Vertical This unique and eye-catching bowl features a mesmerizing Voronoi pattern, creating a sense of organic complexity. The intricate latticework allows for glimpses through the bowl, adding a touch of visual…
Printing the airless basketballs at full size works just fine but scaling them down to half size makes them a little bit too weak and difficult to print with a 0,6mm nozzle so I designed my own 120mm ball It has a lot thicker design with…
Voronoi Pattern Coaster (Circular) This unique coaster features an intricate Voronoi pattern, adding a touch of organic elegance to your coffee table. The open design allows for easy cleaning and prevents condensation from pooling.…
Designed from scratch, but very aesthetically compatible with the existing Voron Zero skirts. Fits in the 100mm gap that you add if you swap all the y extrusions from 200mm to 300mm. Why did you do that? Who cares!
This voronoi star was made as a Christmas tree topper but can serve as a general decoration too. You can tweak the optional tree connector dimensions in fusion360. Merry Christmas! Printing Information: Print the model on its back (laying…
Need a 4-inch fume extractor exhaust connection for your Voron 2.4 or Trident? This magnetic 4-Inch Voron fume exhaust connector remixes the ring from JCShumpert 's Magnetic Fume Exhaust (4 inch duct) for EnXLosure Backpanel for use in…
Printing Information: Use tree support to support the voronoi structure. You can get away by only supporting the critical regions. Use a brim, since its contact surface with the printbed isn't all that much.
Yo can put your own text on the inner heart by modifying the two sketches (one each side) in fusion360. You can also easily change the scale of the inner heart compared to the outer one with a parameter. Printing Information: Use tree…
Printing Information: Use tree support to support the voronoi structures. You can get away by only supporting the critical regions. Use a brim, since its contact surface with the printbed aren't all that much.
A remix to suit my needs. I wanted these parts to match the shape of the original Voron release parts I had printed.
Replacement for your old water drain cover with high flow rate. Diameter 80 mm Height 80mm Air blocker half cylinder depth 40mm
Description Panel lock for Tophat by @Luc1luc_279134 https://www.printables.com/model/567013-voron-24-trident-tophat-66mm/files https://www.printables.com/model/571759-voron-24-trident-tophat-35mm BOM: Printed Parts: 4x Lock 4x…
Voron exhaust fan block off plate, I used this when I went to CPAP- Pause at layer 15 for color change -x4 M3x8 screws
This cover was designed to clamp onto the umbilical cable without needing to disassemble the cable. Based on Fiction's Exhaust Cover , but re-implemented in OpenSCAD. Scad files included for customization. Requires adrianschlatter's…
I used the Voron V0.2 Master Assembly Fusion 360 model and added a 22.15mm hole to the rear skirt so that I could add a switch for my LEDs.
Upgrade my ender 3 to base Boron and Klipper and the screen in the botton was not helpful when put the enclosure
This is a replacement for the motor panel of the Voron 0 with a mount for 2x WAGO 221 and a Fysect UCAN board. You can use two zip ties to hold the bowden and umbilical cable in place and a second one to fix the umbilical to the part…
Picture of the final build will follow This is my version of the TFT50 Screen from BigTreeTech. Ive added a magnetic mount so the screen can be easily removed for maintenance. It is also compatible with the Clicky Clacky Door. It useses…
This mod allows you to replace the original carbon filter, but let's you have up to 5 umbilical cables through the back of your printer. The design allows you to have a clean wiring inside the chamber and let's you manage all the CAN…
I had printed out the original, but the F695 bearing i had was really loose in the arm. I adjusted the bearing tolerance to be 13mm even down from 13.3mm. This seemed to let the bearing I have pop in gently and fit snug. Let me know if…
Needed a way to mount the 60mm electronics cooling fan on the switchwire or add a second one Middle skirt modeled to eliminate mounting points for the Mini12864 Bodies on holes can be used to add infill pattern or multicolor to the skirts…
This is a complimentary bracket to be used with the terminal block by @driftrotor. I wanted to use a spare 3010 blower fan I had for chamber circulation. Optional mounting for a small JST interconnect PCB from a LDO kit, if you have that…
Extended the mount by 5mm. This way, the fan is further away from the back panel, the flow is then less restricted.
Adaptació del genial projecte de Bikin_Creative Lineux One per adaptar-lo a una Voron Trident 350mm sense perdre àrea d'impressió. Encara estic a l'espera que arribi la “ClickyClacky door” i els perfils vermells de la part superior. Els…
Mod to turn the side skirts into small handles. To make them a bit stronger I added one more screw fixation. I have two versions, with the original hex pattern and a solid version. I use the solid version on the fanside to prevent the…
It features a display port for one 126x64 OLED display (ssd1306). Additionally up to four toggle switches can be mounted. You are going to find all .step files for download too, for you to modify Printing: Print all parts in the…
This is a top hat for a Voron Trident 300 that I'm calling an Ascot because of the jaunty angle ;-) . This gives extra height for an umbilical setup in the rear yet allows a complete unobstructed view into the chamber while standing in…
This Skirt takes 30mm fans in order to keep your Vorons electronics compartment cool. The parts fit like the original ones. The 30mm fan does not need to be the same as in the hotend. a cheap one will do. Looking for a 30mm fangrid?
This is a lampshade for the FormoLum lighting system. To use this lampshade you need to download the FormoLum Universal Base. Download the Universal Base here:…
This is a Base Cover for the FormoLum lighting system. To use this Base Cover you need to download the FormoLum Universal Base. Download the Universal Base here:…
i wasn't satisfied with the small touchscreen available and went for a hunt on aliexpress and found this little gem. Only drawback is the somewhat huge bezel, i tried to keep the bezel as minimal as possible to not further increase the…
Printing Information: Use tree support to support the voronoi structure. Use a brim to improve the contact surface with the printbed
Printing Information: Use tree support to support the voronoi structure. Use a brim to improve the contact surface with the printbed
I had a bunch of 4-pin and 8-pin GX16 connectors left over from previous projects and figured they might come in handy for future toolhead upgrades or repairs. I designed two models: one with a cable escape, ideal if you're using a 4-pin…
Printing Information: Use tree support to support the voronoi structure. Use a brim to improve the contact surface with the printbed
Printing Information: Use tree support to support the voronoi structure. Use a brim to improve the contact surface with the printbed
Printing Information: Use tree support to support the voronoi structure. Use a brim to improve the contact surface with the printbed
Voron V0.2 Fridge Door / Colony Clacker Stealth Skirts 2.8" Waveshare screen as the tittle suggests, you are now out of breath reading it… lol but this is the Stealth Skirts option if you want to fit the Waveshare 2.8 inch screen to your…
I use it for my custom large format printer, therefore i cannot guarantee the fitment for any standart printermodel.
I wanted a way to mount my Fysetc Hot Keys to the side of my Voron. Bom: 2x M3x8 screws 4x M3x16 screws 4x Voron standard M3 heatset inserts 2x M3 roll in or hammer nuts
This mount is designed for the left front corner of a Voron 2.4. It is suitable for the Halvklart / KAPPLAKE LED from Ikea. Printed everything with the usual Voron settings. As a negative volume, the Voron logo was added , modified and…
This LED stripe carrier allows installing LED stripes up to 30cm long on to your printer!
Attach the mount bracket to the top of the pi case with 4 m3 screws and nuts. Check which version of the HDMI5 you have
Collection of 10 inch blank Panel with Voronoi Pattern 1-3U These Models have a finer pattern than my first model with the Voronoi pattern Print as you like, these models are not for structural integrity.
I switched to a CANbus umbilical setup and wasn't happy with my initial solution of sending the umbilical cable through the bottom deck, so I came up with this. The strain relief is meant for the USB cable going to a Beacon eddy current…
Voron 2.4 skirt hole adapter for a 19mm metal push button switch from Aliexpress. Fits only in a left front skirt in this particular hole. ) There are version with a pattern on the face and the flat one.
Printing Information: If you have an MMU, you can split the model to its pieces and use two different filaments for the two pieces (no purge tower needed). Otherwise, you can achieve the same results by changing your filament during the…
Printing Information: Use tree support to support the voronoi structure. Use a brim to improve the contact surface with the printbed
I just wanted to be able to provide the ability to mount a Cartrographer on this toolhead
Been working on this for a while on and off, pretty much has been working great for my setup. I had to change the files some to work for the standard bed layout for the 350mm 2.4 since my bed sits lower. Its also made for a 355mm and can…
Simple remix of the Pixel10 slim case. Best done in TPU. Added dust cover for USB-C port. Dry your TPU! Keeps stringing down to a minimum. EDIT 9/25/2025 Added a camera bump ring. Simply print this separate, and glue to your case. For fit…
Modified the original just to remove the pad for VHB if you are just mounting theors ia hardware Created a hole and placement template to make drilling mounting holes easier
i wanted something to mount the k1 camera inside my vorons so i designed this mount to connect to the top of the printer extrusion to ensure the camera was out of the way for monolith awd. the k1 camera is 1080p 30fps and can handle a 70c…
Corvus ATX – The 3D-Printed Voron-Inspired Computer Case! What if the Voron Design team decided to stop making 3D printers and build a PC case instead? Spoiler: THEY DIDN'T! This is not an official Voron project… but it might be what it…
This is a custom adaptation of the renowned Voron Stealthburner toolhead system designed specifically for Creality CR-10S and Ender 3 series 3D printers. This modification allows you to upgrade your stock Creality printer with the…
This is a modification of the original Voron trident skirt but modified for voron 2.4 with 40mm extrusion.
This is a protective cover cap designed for the Voron ERCF Filament Stress Sensor . Its purpose is to hide and protect the wire soldering area, giving the sensor a cleaner look and additional mechanical protection. Features Protection:…
v.PC – Alphacool Core 200 Reservoir Mount for the Voron inspried PC This is an add-on part for my Voron-inspired PC case project: v.PC - Voron inspired PC Case It is designed only for the Alphacool Core 200 reservoir and I cannot…
designed for the Waveshare OV5693 camera in a Voron 2.4.
I wanted to mount 2 UHP Power supplies and I didn't have tools to tap new holes in my Bakelite electronics bay base I used these as both a drill template and a mount. Drill 4 holes for one end (2 per power supply) and use the power…
only one piece, will need some supports additional hardware: 2x M3x16 screws 2x M3 nuts 2x M2x8 screws
I added the intermediary step where the red panda was just joint together would someone want to remix it as well. Printing Information: Use tree support to support the voronoi structure Use a brim to improve the contact surface with the…
🧱 Description This support is designed for the Inverted Electronics mod on the Voron Trident . It provides a solid yet cushioned base for the electronics cover panel, effectively solving the issue of the original clips that tend to come…
If printed correctly they should fit perfect, and not fall out.
Voron StealthBurner has no filament sensor, let's add one. In case you have a MK3S's filament sensor retired or spare, we can use it to make a filament sensor for stealthburner. Voron stealthburner…
Voron Keychain Single color model has indents (keychain-indents.step). Print it face down, less chance of layer splitting that way. The model can be scaled down if needed, but be careful with text resolution. Other How to set colors for…
You can get the mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition for free when ordering it directly through PCBWay —you only pay PCBWay’s manufacturing cost.…
New and Improved mammoth-3D Toolhead The latest mammoth-3D Toolhead has been completely redesigned for maximum performance and durability. The main toolhead body is no longer FDM-printed—it's now available exclusively as an SLM-printed…
This is a modification of the front right skirt on a Voron 2.4r2 350 printer. It allows for a connected SSD to be removable making it easy to make backup images of the disk before upgrades. Needed Hardware: If the SATA connection sticks…
widened the bracket holes to fit better and allow it to be directly screwed into the angle bracket (such as these https://www.aliexpress.com/item/32707599936.html). Also removed the MGN slot. My frame had lots of space so the rail just…
A hinged metal arm for 3D printers, simplifying cable management with durability and easy maintenance in mind. Based on the open-source PRUSA SwingArm, this short, hinged metal arm guides a sleeved cable bundle (or a USB/CAN cable). The…
Note: the press-fit is sensitive to pressure advance and printer dimensional accuracy. (You can also use the negative shape slicer tool to add labels)
All Modifications have been created in Prusa Slicer. All 3MF Files are available. This mod can be used with the Tophat / Canopy for Vorons. CYD Case Mods: added 3.5mm holes (distance 30mm) to the Backplate. Voron Removable Doors (from…
A simple holder for a silicon nozzle cleaning brush. Tested on Voron 2.4 (350 mm), but it may fit other printers with 2020 extrusions. Features: • Securely holds the brush for nozzle cleaning/purging • Compact and quick to print Print…
🧰 Nozzle Brush Bedstop + Bedstop A compact set of parts that combine a silicone nozzle cleaning brush with a bedstop, plus a matching bedstop for the opposite side. ✅ Compatibility • Tested on LDO Voron 2.4 (350 mm) • Should also fit…
K2 hotend modification to the Voron 2.4 Stealthburner with clockwork 2. The K2 hotend filament tube extends all the way to the top to be flush with the body where the cutter cuts.
Printing Information: Use tree support to support the voronoi structure. Use a brim to improve the contact surface with the printbed
Add a couple of Revo Voron Nozzle Holders For Micron R1 to keep your nozzles handy. You can use the same twist pins as the R1 panel clips for this mount. Use the same settings that you used for the panel clips during the build. I printed…
Based on the wonderful CPAP and coal filter designed by Smolboi, i've added the 60mm exhaust fan from the voron and combined the 2 o-rings into a TPU gasket which is more easy to mount. I've replaced the original EBB36 with a EBB42…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) FLAME ORNAMENT VORONOI A…
Hey there, I redesigned “Voron Front skirt for Trident/2.4 (Headless) No screen” so it fits 250 mm printers and made it easier to print it with 2 colors. Also Fusion360 file is included so you can make different logos. Hope you like it.
Hey there, These are yet another Voron skirt buttons, because i didnt like any other buttons. I used keyboard MX switches so the feel of pressing the buttons is superb. The assembly should be very easy because its all just press fits you…
I made this remix to install this cheap camera from Aliexpress. This camera has a 130º aperture, which makes it easy to attach to the Voron 2.4 gantry. Link to the product on Aliexpress: https://pt.aliexpress.com/item/1005007989879227.html
This modern Voronoi-style storage box is designed for both aesthetics and practicality. The model includes two lid options : Voronoi Lid – matches the artistic pattern of the box Solid Lid – clean, minimal, and fully enclosed 📐 Dimensions…
This was made in Tinkercad as i do not know how to use f360 but it is a good model besides that. -- Original Models Description -- This 3d printable frame mounts in the electronics bay of the Voron V0.2 using the six screws that hold the…
Printing Information: Use tree support to support the voronoi structure (30° angle threshold works well) Use a brim to improve the contact surface with the printbed
