Garbage bag holder top/side. Standard, Hexagon and Voronoi design.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple garbage bag holder.
- Ocena
- 4,769 / 5
- Polubienia
- 1711
- Pobrania
- 2583
- Wydruki
- 31
- Wyświetlenia
- 15 977
- Oceny
- 26
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Hi,
This is my version of garbage bag holder. I sticked it with double sided tape on upper side of my cabinet. You can place it also on side.
I prepared several models, inner diameter 51mm and 68mm and 51mm dual holder. Also you can choose end stop variant for all sizes.
If you need another size (longer or wider,…), use your slicer to change dimensions.
UPDATE: I uploaded new, Voronoi and Hexagon design versions of the model.
UPDATE2: Based on your comments, I created new V2 Hexagon design rotated by 90 degrees to prevent overhangs when printing. Also 90mm Hexagon V2 has been added.
UPDATE3: Based on steffanders comment, New, rounded windows of the Standard version was added to prevent overhangs
Happy printing!
PLA, layer 0.2mm, 20% infill is OK.
I printed it on MK2.5S 0.6mm nozzle.
Don't forget to use brim. Recommend wide inner and outer brim.
If you use this orientation, no supports needed :-)
