Liczymy pasujące modele…
The most meticulously organized Lego Star Wars collection A complete list of 55 Star wars factions available to download: At Attin Black Sun Bondsman's Guild/Bounty Hunters Churches of the Force CIS Separatists Clan Djarin Clan Fett…
amazing hexagons stacking game Rules : chose a player to go first then the player to the right chooses a peace for the first player to use the first player must place their peace (according to the images below) somewhere on the base now…
Made this to have something where I can store all hexagonal tokens. 4 of these are enough to fit all tokens - I have decided to also glue mine together as showed on photo.
Everyone loves a hexagon don't they? Remixed the original with 4 variations. Blue - Same as original with hexagon background pattern. (Original Hexagons) Green - Same as above but with 3 x 5mm countersunk mounting holes for wall mounting.…
Designed this simple yet rugged wall mount for the great minifig hexagons. :) I chose to put the front side on a textured bed for better look but also to get it slightly stronger. Can be printed without infill. There's two versions, one…
I made these plates since I just don't have enough original LEGO plates to mount the minifigures on. Works well to print in 0.3mm and without support.
Headset Stand with Hexagons and Storage. No glue needed for the ring
A simple badge holder. No need for supports, prints fine with PLA and 0.2 mm height. And it has hexagons…
0.20mm layer height 15% infill 3 walls dimensions: Small: 100x100x65 mm Large: 200x100x65 mm 2 versions of grid both version are to print without support i printed from PLA: black Majkl3D-Filaments white Aurapol MARBLE 1
A remix of the stiffened polygon by alecs.form. It should print at 100% size; you could increase xy_size_compensation (0.1 will work) in order to reduce the print size.
A compact 3D version of Yinsh board game! With hexagons for more coolness. The whole board is aroung 35cm in diameter when assembled. Printing You'll need: 6 pcs. of “Yinsh_board_Piece” 5 pcs. of “Yinsh_Ring” in first colour 5 pcs. of…
This is a fractal structure generated in Blender using Geometry Nodes. The model has 1 M of triangles, the “simplify model” in PrusaSlicer allows to half the number of triangles with an acceptable loss in quality.
Open 1U 10" Rack Panel with hexagonal cutouts. The screw holes are designed for M5 screws Dimensions ( in mm ): W=254 x D=5 x H=44.45 Screw Hole Diameter ( in mm ): 6 Filament used: Polymaker ASA Black Settings used: 25% gyroid infill 5…
Inspired by the many models that can be found on printables - I did not like the trimmed hexagons so I designed a case with only complete hexagons.
Remix of the “Borders for Honeycomb storage wall” by Weazelbuffer. Piece named side_b with 8 hexagons long instead of 9.
Since last year the Dune set was introduced it featured a large minifigure on a stand. Since i just loved the Dune series and i love Lego i decided to combine the 2 and remixed my original large minigure version on 9 and created the…
The most meticulously organized Lego Star Wars collection A complete list of 55 Star wars factions available to download: At Attin Black Sun Bondsman's Guild/Bounty Hunters Churches of the Force CIS Separatists Clan Djarin Clan Fett…
Saw some other hexagon stand but I wanted something slightly different! This is a layered hexagon display stand that just snaps together for easy storage after a show. Total print time with plated 3mf at 5% gyroid 3 walls: 5.5 hrs and 207…
(Bigger) Basket with Hexagons/Honeycomb | 150x150x110mm note: There are 2 versions: 1 with handle cutouts - and 1 without!
Corsair text and Hexagons added onto the Dominator top bars
This box is perfect to store your playing cards, while you aren't using them. The box delivers the perfect protection to transport your playing cards in your backpack, pocket or wherever else you put your cards. If you want to know which…
Transform your walls, desks, or projects with this modern and playful set of hexagon-shaped tiles featuring a variety of icons. Each piece is designed to perfectly fit together, allowing you to build endless honeycomb patterns — from…
This is a set of modifiers for your models to print the bottom and/or top layers to create a hexagon pattern. This effect works best with silk filament and (for bottom surfaces) a lightly textured build plate. The instructions are for…
PLA or PETG .2 layer height .4 nozzle 2 walls, low infill (0-10%) They connect with the original Hexagons, just gives you more options 6 Connecting Sides with a Center Shelf 1 Connecting Side (both types) 2 Connecting Sides 4 Flats
Hexagons displaying a japanese Landscape with shrine, temples and the mt. Fuji. Its 542mm high and 344mm long (1mm wide) but up- and down-scalable. There is also a spacer to arrange the Hexagons right. 15 Hexagons in total.
Remix of AJsRaceway's Minifigure Display designed to hold and display LEGO Dimensions models on their RFID tag bases. The depth of the hex perfectly matches the diameter of the Toy Tags so these are 100% compatible with AJsRaceway's hexes…
I want a specific way to mount these hexagons where the screw was inside the hex but a whole back plane wasn't added so I designed this. It also keeps you hexes 2mm from the wall but if that's not what you're looking for feel free to…
this is an remix from the model https://www.printables.com/model/940355-interlocking-hexagons
Recommended print settings: Material: PLA Layer Height: 0.20 or less Infill % : 15 Supports: No Print Orientation: Default The larger pictured was printed at 200% scale. Assembly: slide both hexagon shapes over the post, then slide the…
Recommended print settings: Material: PLA Layer Height: 0.20 or less Infill % : 15 Supports: No Print Orientation: Default Assembly: slide both hexagon shapes over the shaft, then slide the ring clips on to retain the pieces.
Note holder with hexagons, make for my wife. Area for note is 90x90mm. I printed with PET-G.
Inspired by https://www.jpl.nasa.gov/news/news.php?feature=6816 https://www.thingiverse.com/thing:2437081
amazing hexagons stacking game Rules : chose a player to go first then the player to the right chooses a peace for the first player to use the first player must place their peace (according to the images below) somewhere on the base now…
its hook that can install on the wall. simple enough. print multiple times so it can merge and look nice together. it also have srewblock where you also can use M5 screw to wall.
Made this to have something where I can store all hexagonal tokens. 4 of these are enough to fit all tokens - I have decided to also glue mine together as showed on photo.
Borromean Rings. Intertwined hexagons. Impossible to separate. Nice demo object to showcase 3D printing capabilities. Also maths! :) FreeCAD 0.19 model included. Two STL files with 3 rings have tight and loose tolerances. Tight model…
This lattice is auxetic, meaning it has a negative Poisson's ratio. Unlike most materials, where compression in one direction makes them expand in the other, this lattice wants to compress or expand in both directions at once. The design…
These models are featured in figure 6.14 of Visualizing Mathematics with 3D Printing . Category: Math
I spend a lot of time tweaking my printers, and I'm constantly on the lookout for models that give me a decent idea of how well the printer is functioning. While cleaning out some old prints, I found dozens and dozens of calibration cubes…
Hexagonal chips for testing color modulating and shading effects. Featured in the Prusa Academy airbrushing course .
for best results try sanding the contact points between the top and launcher and maybe even use a very light lubricant like silicone lubricant.
I don't have a 3D printer myself! If you print this, please post a 'Make' with a photo. I'd love to see how it turned out!" iPhone 12 or iPhone 12 pro phone case. Print in TPU for the buttons to work. Designed using a accurate dummy…
Toothbrush holder, I made for myself and my wife. Holds most toothpaste, depending on the cap type.
Remix of Staggered print sheet holder shorty 6 x 100 mm - HSW hexagons 90° rotated
Hexagons with the MTG mana symbols. Remixed from https://www.thingiverse.com/thing:104988
This is a bowl made of hexagons offset from each other. It is modeled small so be sure to scale it up to the size you want with the Bowl_Final_corrected.stl file. Two Options for printing: Option 1: Print the whole model at once using the…
Simple hexagon toilet paper storage for your bathroom! The back is lots of little hexagons as well! Hexagons are bestagons! fits toilet paper rolls up to diameter of 200mm (7.8 in) and up to 99 mm length (3.9 in). the hanger holes are…
This is a remix based on jcolega's "LEGO Dimensions Display Hexagons" which work really well. That design has a satisfying snap of the Dimension Medallion into the hexagon. But I still play the dimension game with my kids. So the snap fit…
An alter to show your support for the bestagon the hexagon. I sliced it for MMU2 so you can get all the colors right.
SpaceX Starship heat tile inspired coaster and optional holder. A clean and simple design with shallow recessed hexagons to allow for easier cleaning and a raised edge to catch spillages. Spacing between the hexagons allows for moisture…
SpaceX Starship heat tile inspired coaster and optional holder. A clean and simple design with slightly raised hexagons to allow for easier cleaning and a raised edge to catch spillages. Spacing between the hexagons allows for moisture…
This is just a small modification of WellFan-Part2.stl. Go grab Part 1 and 3 from here ! I have my printer in a tight spot and the recessed hole that pacman42 did would bring my printer dangerously close to the front edge of my desk, so I…
The nozzle threads in about 3 finger turns so you don't have to spend all day unscrewing it. Sticks out past enough for comfortable use, but doesn't stick past the frame/skirt top and bottom. I might make a cover or something…includes a…
Designed a simple mount for hanging my Minifig Hexagons onto the side of a shallow IKEA Ivar shelf. It hangs off the standard Ivar metal rods, so you need to have some extras of those, but you can easily get that at any IKEA store. When…
I have all my printers fitted with 0.6mm nozzles and the original models had a bit too thin walls for that to work well. I therefore made the walls 2mm thicker + moved the hole for the minifig base 1mm up. This model is based off the…
Hey, I was just trying tolerances with hexagon, but I found out I really like how it looks, so i printed more hexagons and I think it looks great. Of course all credit to author of HexScraper, I just made little modification.
Today I was printing one of Radek 's inner dividers for kszlachcikowski 's honeycomb filament sample spool when it suddenly hit me: NO HONEYCOMBS! Of course, this was so disturbing I couldn't let it rest. A half hour later (and thanks to…
A simple drink coaster with hexagon design to catch condensation.
I used PETG, 20% infill (10-7% is ok), 0.20mm, 0.4 nozzle. Use 0.15mm for better results. No supports required.
These brackets were built with the purpose of storing the maximum amount of filament in the least space possible (the unused area to the side of my printer) while also bringing a little flair and color coordination to my LACK stack. Each…
The Prusa Mini Base Squashball Legs version has the balls cutting through into the bottom hexagon on each leg. I did not like it, so I designed hexagons with solid top and an edge adjusted so it does not push on the ball. They can be used…
you can stack them on the Tower Fountain no glue needed
I wanted a case for my ancient iPhone 8 since I didn't want to pay for an overpriced object in 2022 conditions. A small Sunday project.. I found Fluki's design here, and remixed it for my hexagonal needs. It works for me, so I decided to…
All i did was add some hexagons to the bottom of KalleKnall's SideBoxes. Original: https://www.printables.com/model/974-prusa-mk3-mk3s-mk3s-sideboxes-for-some-tools
This is a modification of: "Stereographic Projection using CSG" by Marcio Teixeira. Note: change the $fn=6 in the extrude module for different polygons. Print instructions Category: Math Art Summary This is a modification of:…
I had some aluminum dowels that came with my lovesac sactionals, I thought they would work well as spool holder rods, so i resized the original model holes for 16mm and wall mounted them instead of attaching to a lak enclosure
Two rollers, each with 2x bearing 626 (Do=19mm, Di=6mm, W=6mm). Connected with a M6x100 (DIN912) hex screw and two washers (Din125, M6) on each side. In the backpiece two square nuts DIN557 M6 are used. You can mount two of these units…
I remixed primarily because the referred 2.0mm magnets were not available at Amazon. Instead I went for these: https://www.amazon.de/gp/product/B00382J9UO/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 In parallel I removed the hexagon…
LOWER, STURDIER, BETTER Designed to be almost 50% lower than the original provided spool holder by Prusa and not affecting normal printing operations, this spool holder is essential for anyone who: Has size limitations for their…
Hexfinity - Because Hexagons are the Bestagons Uses the same measurements as Zack Freedman's Gridfinity, so it's technically compatible? :) How was this not already a thing?! Well, now it's the template for a thing, but still not a thing…
This model work only with the OLD version of ReFill. If you have recently purchased ReFill products with the cardboard core, please download the updated flanges HERE ReFill is manufactured for usage with re-usable master spools like in…
I wanted the Basic Board cover to match the cover of the LCD panel, so I made a remix without the hexagon imprints on the top. Printed with Prusament Orange PETG. The printer settings are the same as the original: 0.30mm DRAFT PETG 15%…
This version of the Prusacaster hexagon pieces has a 2.3mm hole for screwing in the strap posts. I filled in the hexagons where the posts are with an 8mm thick fill for added strength and to hide the screw.
This is the remixed version of Rob Ludwick's great hinge design. The only difference is there are no hexagons. Smooth and plain look.
Raw S1 Slim Fan Top Hat - Lines and Hexagons versions with fan top and bottom braces. Recommended print settings: Layer height: 0.2mm. Extrusion width: 0.4mm, forced. Infill percentage: 42% Infill type: grid, gyroid, honeycomb, triangle,…
If you need a flat, tileable hex-grid for playing games like Battletech or Gloomhaven that need a ~33mm hex size (Flat to Flat) these are for you! Two versions: Hex Playtile: Can tile infinitely in all directions, it is symmetrical.…
Hi there! I designed this practical 3D printable keyholder that features a sleek design with two trays to keep your keys and small everyday items organized. Easy to install with screws or adhesive strips. Buy me a coffe I like to share my…
TL;DR A very hugh strong garden planter, 20cm wide, 20cm height, 6 liter made from PETG. Collection tools, garden Motivation My wife needed some unique planters for her mango experiments. And i liked to play with the lattice2 workbench in…
I added the “normal” hexagons to my scraper and thought, “why shouldn't i make partial hexagons for the borders aswell?” So here they are. The 1/3rd hexagons are for the small corners on top of the scraper. The flat half ones are for the…
This print require to modify some slicer parameters, G-code for Prusa MK4 and MK3S+ is provided, if you need to slice this model for your printer please, follow the instructions step by step. More model variations and 70mm size coming…
No supports are needed. Scale model from around 80% to 100% (whatever fits your print bed). Optimized for filament 3D printers. Not advised for TPU.
I decided to make a remix of this model because the leash assembly place was too weak. I also removed those little tabs for the ID to came in whole.
Inner hexagons of Prusacaster, to print with different colors.
I couldn't find a safety razor stand I liked, but I found similar ones, so I quickly modeled this in Fusion 360 for fun. Print instructions Print it flat on its back, PrusaSlicer will lay it flat for you if you import the 3mf file.…
This model originally from @AdamStarbuck has an interesting aesthetic and is a very useful item to have. However, after printing his original version and using it for a little while, I knocked it over and one of the holding arms broke.…
I printed on 10% infill with PLA filament No supports are needed if the hexagons are facing forward on the build plate and on the upper side of the model. Printed on 0.15 mm Structural I have attached GCODE for the MK4 and MK3.
