1 / 1
Apple Cord holder for 0.5" table (with hexagons of course) — zdjęcie 1

Apple Cord holder for 0.5" table (with hexagons of course)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is made for IPhone cables (x5)

Ocena
0 / 5
Polubienia
3
Pobrania
29
Wydruki
0
Wyświetlenia
193
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Public Domain

I printed on 10% infill with PLA filament 

No supports are needed if the hexagons are facing forward on the build plate and on the upper side of the model. 

Printed on 0.15 mm Structural

I have attached GCODE for the MK4 and MK3.

Tagi