Ender3 S1 Rail Accents (Hexagons)

Designed HEXAGON accent covers that fit into the rail grooves on an Ender3 S1 printer.

Meant to be used in conjunction with my other ‘Straight’ accent mod: https://www.printables.com/model/813223-ender3-s1-rail-accents-multi-size-options

--OPTIONS--

Pattern B = Thicker styled hexagons.

Pattern B2 - Thinner styled hexagons.

--WHAT TO PRINT--

x2 212mm-ZAxisRight1 for the right side of the vertical z-axis.
x2 212mm-ZAxisRight2 for the right side of the vertical z-axis.

x1 212mm-ZAxisLeftUpper for the left side of the vertical z-axis.
x1 212mm-ZAxisLeftLower for the left side of the vertical z-axis.

x2 198mm-Bed1 for the horizontal front sides.
x2 198mm-Bed2 for the horizontal front sides.

x2 172mm-YAxis1 for the center horizontal y-axis.
x2 172mm-YAxis2 for the center horizontal y-axis.

Left side of the vertical z-axis had to be made differently due to the mounting bracket screw on the gantry. It moves right up near the metal so I could not use the same design pattern there.

--SETTINGS AND NOTES--

I printed these at 0.2mm with Green 3DF PLA and Silver Generic PLA.

I am using Cura with a Horizontal Expansion setting of -0.05. Please print a small test to ensure that the accents will fit properly. Also found that not all accent slots were the same size. Set the Minimum Wall Width to 0.3 to avoid the slicer creating a single wall.


--OTHER COMMENTS--

Created multiple channel sizes to help with variations in printer rails and filament settings. NormalFit, and LooseFit.

I recommend printing a 40mm piece of each Fit to test on each part of your printer.

Each Zip file contains 16 stl files to correlate with each size and variation.