1 / 2
LOUQE RAW S1 Slim Fan Top Hat - lines and hexagons
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raw S1 Slim Fan Top Hat - Lines and Hexagons versions
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 1405
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (13)Powiązane
Raw S1 Slim Fan Top Hat - Lines and Hexagons versions with fan top and bottom braces.
Recommended print settings:
- Layer height: 0.2mm.
- Extrusion width: 0.4mm, forced.
- Infill percentage: 42%
- Infill type: grid, gyroid, honeycomb, triangle, or cubic -or - support cubic if you want to go fast.
- Walls: 1 for top/bottom layers, 4 for all other.
- Solid top/bottom layers: 4.
- Supports: None.
Recommended filament:
- PETG
- ABS/ASA - top hat will have tendency to warp, you can succeed with some serious brim though.