1 / 2
LOUQE RAW S1 Slim Fan Top Hat - lines and hexagons — image 1
1 / 2

LOUQE RAW S1 Slim Fan Top Hat - lines and hexagons

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Raw S1 Slim Fan Top Hat - Lines and Hexagons versions

Rating
0 / 5
Likes
15
Downloads
129
Makes
1
Views
1,405
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Raw S1 Slim Fan Top Hat - Lines and Hexagons versions with fan top and bottom braces.

Recommended print settings:

  • Layer height: 0.2mm.
  • Extrusion width: 0.4mm, forced.
  • Infill percentage: 42%
  • Infill type: grid, gyroid, honeycomb, triangle, or cubic -or - support cubic if you want to go fast.
  • Walls: 1 for top/bottom layers, 4 for all other.
  • Solid top/bottom layers: 4.
  • Supports: None.

Recommended filament:

  • PETG
  • ABS/ASA - top hat will have tendency to warp, you can succeed with some serious brim though.

Tags