Counting matching models…
Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3S with MMU2S unit build from Ikea LACK table. Check the article with build instructions . NEW After a lot of asks, the STEP file is available for download in…
Print approx. €4.10–€5.02 excl. taxPreliminary estimate for PETGSource material: PET
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
Overview A compact desktop housing for the common 16 mm, M12x1 thread momentary push button (the red-cap style). The base snaps on without screws, a hidden magnet holds it to steel surfaces, and the cable enters at an upward angle to keep…
About I used hole in the doors of the Original Prusa MINI Enclosure as an entry point for filament PTFE tube. Moved handle for fingers a bit lower, and added magnetic coupler in there for s 6x2mm magnets, which are popular in gridfinity…
Modified the original design to fit a 5V 30AMP relay. I have modified the dimentions to fit a 5V 30Amp relay that I had to use in a project.. Amazon link (no affiliation) - https://www.amazon.com/gp/product/B07DSZFLMQ Relay Dimentions:…
Official Enclosure for the Growmax Garden Automation Board by OpenSensor.io This is the official enclosure for the Growmax garden automation board sold by OpenSensor.io. I print and include this model with the kits I sell, but I'm also…
A nice cloud to put in your child's room to monitor the air quality discreetly (CO2, humidity, temperature,...). To put on the bedside table or hang on the wall. Another variant is available here :…
Stack-A-LACK As mentioned I wanted to create my own variant of the LACK enclosure as I didn't quite find one that I liked. This was good because I need practice with CAD and my printer. INNER DIMENSIONS ARE AROUND 53x53x56mm(45mm between…
I have .3mf files with my settings I've used over at Makerworld . To split the model into each individual object: (In slicer) Right-click model → split → to object Designed for a full size ATX PSU and a dual PCIe bracket GPU GPU size…
I really hate how Sovol provided no provision for properly sealing off or even attaching the bottom edge of an enclosure in the shape of the base. So… I made these up, to give a surface for attaching some foam tape, and to provide some…
I made the adapter to fit the hygrometers that I routinely buy from Amazon that are used in my dry boxes. There are two files, I am using the one for ABS. The other one is tighter and may work better in pla. I included both step files if…
…Please be sure to hit like & post a make, I'd love to see your prints! WARNING! If you do not know how to wire this system correctly & safely I STRONGLY recommend you DO NOT attempt to print or use this model as you are dealing with…
The Minimal Mainboard Enclosure, when you want *just enough* protection for the mainboard from your Framework 13. Features Include: 2 Framework expansion module mounts. Locking clips included to make sure you don't rip out a port while…
This is an enclosure for the WT32-ETH01 featuring a Type-C connector, with options for including or excluding a POE splitter. links to the module: POE Splitter 48V To 5V Or This Type C Connector WT32-ETH01 Or This I was searching for a…
I made this part because I wasn't satisfied with top lid opened all the way back resting only on hinges, which added pressure to material and there was a risk of damage. This part makes enough space for hot air to come out of the…
Designed this for universal fit 120MM fans Has provision for mounting temp control board to the side Uses basic 5mm thru holes for mounting to enclosure panels
This is a Raspberry Pi Camera Case Holder for Prusa IKEA Lack Enclosure. It's a very sturdy permanent solution for the Lack Enclosure, adjustable in 2 directions (up-down) and (left-right). Fast and very useful print!
Used the hinge and support designs from https://www.thingiverse.com/thing:1250943 as inspiration, with slight alterations. As for dimensions, some inspiration was taken from https://www.thingiverse.com/thing:2005920 .
Enclosure for a Sonoff NSPanel Pro 120 . Couldnt find one online so i made one in fusion . Used some heat inserts for the plate mounting
I wasn't lucky with that nice hinges from nadir. It was because my workspace is so tiny that I can't let the doors open during PLA printing. With closed doors, the heatbreak gets clogged after max. one hour of printing because the cooling…
This was printed in ASA but you can use whatever you like.
This is a simple enclosure for Guition ESP32-S3 display. Designed to be printed with 0.2mm layer height without supports. Requires 4 M3x8 screws. The screws goes directly into plastic. I printed mine with ABS and even with plastic…
This is my LED Daylight Holder to mount it under the extrusion for my RatRig VCore4, but it could also used for other printer like Voron and so on. I used the Vector3D LED Stripe. I made and used it for my V-Core 4 with full closed…
[Edit] Don't do what I did. Install the sensors the other way around. My silly way makes it very challenging to get them out. [Edit] Updated two files to fix slicing issues. Easy print, no supports. Secure to door/window using VHB or…
Adjusted the mounting points and opening for the USB port to accommodate a generic Arduino Nano clone with USB C
I wanted to use the HULA feet for the Prusa Enclosure and not just the printer itself. So i used the outline of the original foot for the Prusa Enclosure. From there I designed the foot to connect to the HULA foot and enclosure. Hope…
This is a Lego-compatible enclosure and a gear for 140-class DC motors, which you can get for dirt cheap almost anywhere and you can control via microcontrollers, Raspberry Pi's, etc. Print face down! See slicer screenshots for reference.…
This is a simple enclosure to hold an RF choke or balun based upon a Fair-Rite FT114-43 or FT114-61 toroid. There is provision for a standard 4 hole BNC connector at one end with a flying lead at the other. The lid can be glued on once…
This model repurposes the parts from the rather large Prusa Buddy 3D Camera, into a much smaller package more suitable for a 3D printer. The printed enclosure consists of 3 parts that snaps together, and no screws are needed. As this are…
All you need is a Creality Filament Dryer 2.0 and some wires, bringing the total cost to just €38 (excluding the filament). The electronics are repurposed from the filament dryer and reused in the enclosure. For the screws, you’ll need 2…
Prevents my garage door from running into the enclosure door. Reuse the original stopper/magnet assembly. Add one M4 fastener per side. Printed in PLA.
[EN] You can find the description in English below [ES] Carcasa de Base para Programador ESP-Prog Esta carcasa diseñada específicamente para el programador ESP-Prog mejora significativamente su funcionalidad y facilidad de uso. Su…
Printed using ABS, PETG could work too. Designed for 3mm enclosure panels on 2020 extrusions. Print settings used: 3 walls at 0.42mm outer wall and 0.6mm inner wall Print 2x of the latch handle and latch base. Requires 2x M3x6mm screws to…
Description Simple design of enclosure for WLED ESP32 Enclosure with microphone Used components: ESP-32S Development Board 2.4 GHz Dual Core WLAN WiFi https://amzn.eu/d/9D1nSNl SP32 Breakout Board GPIO 1 into 2 Compatible with 30 Pins…
An External 3 Drive Bay Enclosure for Greaseweazle. It has mounting options for the F7 Plus or the V4 Greaseweazle. Use M3 screws for the enclosure. The Greaseweazle's will need smaller ones. Will require a large printer the length is…
Tutorial on the Enclosure : Print: 8x the base 28x railings or 24x holder or for budget 12x 2 for each plexi glass(but there will be a gap ) Plexiglass: The width of it should be around 62,8-62,5cm The length should be of 70cm You will…
Lightweight and "somewhat modular" 3D printer enclosure. Easy to build - Just a screwdriver. No funky drilling, soldering, cutting, sawing, heat insets. Measures about 640 mm / 25.2 inch cube. Does not take forever to print, does not burn…
I designed the enclosure after watching a video from 3D Printing Ideas showing tests with a filament box. The brackets inside are for two 40 mm fans tilted by 5° to circulate air around the top of the silica gel and move the moisture in…
Print it however you want, but I used 3 perimiters PETg 15% infill 0.4 nozzle/ 0.2 layer height Parts Required: 2 x M3x10 2x M3 hex nuts The tolerance for the nuts is very tight. you may need to use a pliers to get the nut into the slot.…
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional Add a zip tie to both sides, after passing the PSU wiring through the hole:…
This is an enclosure for the MKS Gen_L V1.0 board. Features: Extrusion mounted Mounting holes and grill for a 120mm fan, which can provide a lot of cooling without a lot of noise Some space inside for routing power wires Cutouts for USB…
By attaching it to the hinge, the position of the thermo-hygrometer can be varied. This way, you can measure the temperature at the upper or lower hinge without needing any additional mounting holes. Suitable hinge:…
OpenSCAD enclosure model for BrewPiLess_2.1 boards by Filippo Ceraulo, selected for its slim profile and use of D1mini or Lolin wemos. The model accounts for 3 probe inserts fitting GX12 connectors (use caps or flaps to protect them from…
Printed in PETG Nozzle Ø 0.4 Layerheight 0.25 support needed for cable entries and usb cutout 16 x M3 heatinsert L:5.7mm 2 x 4010 axial fan
Housing for 1.6F capacitor bank (often advertised as 2F, 2.2F) up to 16V. Very basic design but it keeps stuff from touching the live parts (low voltage, but high energy). Inner dimensions are roughly 65 x 30 x 15 mm, if you want to use…
I purchased a LoRa module from Amazon to get started learning about Meshtastic, and I realized after receiving it that I needed an enclosure for it. I didn't realize how easy it would be to set up. I would assume if you're here you…
I've remixed a nicely designed ported speaker enclosure to fit my 1.5 inch speaker with bigger magnet. I've also made a version with pins for toolless assembly.
Created this dust enclosure to protect my 3D printer from dust, it can be used to protect other appliances. When printing the nuts (tripods) they only need a small support on the bottom of the sphere (use 85° minimum support angle), the…
Hyperpixel 4.0 Square Touch with Raspberry Pi5 enclosure (work in progress). (Update: 09/11/25 - I will be back to adjusting this design. Your input is very welcomed) This is the base test enclosure for an upcoming project. There are some…
Snapmaker 2.0 Enclosure Filament Holder Adapter Function: This adapter relocates the filament spool holder on the Snapmaker 2.0 enclosure from the long side to the narrow rear side, addressing space constraints and accessibility issues.…
*Updated profile to v2 - improved design which is now easier to take apart (better gap tolerances, and an indent at the back to prise it apart without damage). Snug click-lock case to build an mmWave sensor for ESPHome using an ESP32-S3…
https://help.prusa3d.com/guide/8-mechanical-lock-add-on_360812 https://www.printables.com/model/284122-mechanical-lock-add-on-printable-parts We have two mostly identical Printers in our school, and both are in the Original Prusa…
This solves a problem where without a filament guide, a bowden tube can get stuck in the sides of a filament spool, causing a jam and misprint. This happened to me and this is my solution that is working well. Drafted in Solidworks, this…
I tried using the file on the MagWLED website for the power button model by ‘James’, but it had a lot of build errors when sliced. Unclear if the issue is the file or my download, but it doesn't seem to be published anywhere else to…
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
Falcon2 Pro Collection This is an intake shroud used to direct air over the cutting surface area. This requires you to cut a hole in your drawer. This tucks under the front so the laser head will not collide with it. This attaches to the…
📦 Description: Take your Anycubic Kobra S1 Combo to the next level with this essential enclosure upgrade! This mod allows you to print PLA with the door fully closed without sacrificing cooling quality. By channeling fresh air from…
🛡 A complete and professional station for your 3D printer! This fully featured printer enclosure is designed for machines up to 70×70 cm footprint and 80 cm in height , with a total enclosure height of around 170 cm . It includes two main…
I was in need of an enclosure for my LED Controller and couldn't find anything that matched this particular device. I've seen them out in the wild before so I'm sharing my work for those that also use this cheap yet effective device.…
Wanted to design my own speaker enclosures for my boat so this is what i came up with. They will fit most 6 1/2 and 6 3/4 speaker. The inter hole size 5.5" and outer size is 6.8" the total height of the can is 7.45" The mount is a…
Hermes is an easy to deploy external node enclosure, version 2.0 now supports the RAKWireless 19007/19003 and HeltecV3/V4 (with MPPT solar controller!). It enables you to deploy external nodes for MeshCore or Meshtastic (or others!)…
I have 605080 battery (idk if its a standart size), i remixed it accordingly
Design features: - easy to print: no support structures and very few filament needed - fits perfectly at the buddy3D camera, not too tight, not too loose I used threaded inserts and M3x10 screws. I added the FreeCAD file of my design in…
vent for my 3d printer. Eventually I wanted to hook it up to have active ventilation. Currently just covered. Part of https://www.printables.com/model/1263333-3d-printer-enclosure-parts
I wanted to make the top of my printer cool, and maybe help reduce noise. Part of https://www.printables.com/model/1263333-3d-printer-enclosure-parts
A smal box for three fan controllers. You will also need: M3 screws to mount it on the enclosure PWMcontroller (Amazon: APKLVSR 6PCS PWM Motor Drehzahlsteller,) M3 screws to close the lid no supports needed
The standard chain starts to sag and beat against the case over time, so I decided to print myself a new one, however, I prefer the simplified drag chain termination and I would like to use the spool holder from @design8studio in the…
The 🥰 BoxTurtle Enclosure comes with a redesigned front and different skirt parts which require some changes to the TurtleFence . So here they are: Modified front skirts, spacers and the clip-in mesh inserts to fit the enclosure … and of…
Silicone tape was used to reinforce all connections. Ended up being quite stable but your mileage may vary- I take no responsibility for your reptiles' safety. More parts in CAD below, but they aren't tested so make sure to measure…
My LM2596 boards use standard electrolytic capacitors, which are subsequently taller than the solid caps on other varieties. I tried a few different models, but they were all a little too short for my boards to fit. This model on Cults…
Use 4x M2.5x7 flat-head screws. Holes in the upper part need to be tapped.
Everyone has medicines at home like paracetamol and I'm not an exception. But I don't like to have them wandering around or in a drawer in the kitchen, I like them in their own enclosure. And what better look for an enclosure than a…
Can be printed out of PLA, but a more flexible material is recommended for easier insertion.
To use this model you will need: One standard 120mm PC case fan 16 6mm diameter round magnets
A battery caddy and board mount for the RAK wisblock meshtastic starter kit. Designed to be mounted inside this enclosure . Full assembly instructions at https://pupius.com/resources/meshtastic/solar
Inspired by this guide for Meshtastic , this model , and the modifications noted in this guide , I created a mount for attaching a Harbor Breeze solar mesh node to a tree, with provisions for holding a right angle SMA connector and…
Darius is a Nano-ITX Intel® based single board computer with a ram slot, 2 mSata slots, and active cooling. This enclosure can be printed or modified to fit the Darius or other Nano ITX single board computers by customising its removable…
Notice! This is only compatible with Python for the AMS 2 PRO. Please view my other designs for designs supporting other AMS systems, there are plenty. Buy Python I've teamed up with a few different stores around the world offering the…
Notice! This is only compatible with Python for the AMS 2 PRO. Please view my other designs for designs supporting other AMS systems, there are plenty. Buy Python I've teamed up with a few different stores around the world offering the…
About This is a kit for converting your original Python Enclosure to a Python Enclosure for the AMS 2 PRO, it works with both the Actively Heated Enclosure and the Passively Dried Enclosure . The printed parts are the same and the panels…
I edited the back corners from the “Ender S1 Pro ENCLOSURE” by LWdesign (https://www.printables.com/model/509715-ender-3-s1-pro-enclosure-remix-ikea-lack-table), so you can use Plexiglass on the back instead of PVC. The Plexiglass has the…
This is the MiSTer Multisystem2 Digital enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support. Please read the included…
This is the MiSTer Multisystem2 LCD Screen (flip up cover) enclosure. We will post more internal adaptors and cover panels for different size LCD modules when available. If you design a different LCD cover/mount/enclosure, please share…
Compact Case for MMDVM Dual Hat (PCB-Only) Give your MMDVM Dual Hat Hotspot the perfect standalone home! This case is designed exclusively for the HS Dual Hat PCB — the Raspberry Pi is not housed inside . I run my Dual Hat connected to…
3D printed enclosure for HP DPS-750RB power supply with an X-Adapter X11 Prints in 7 pieces Functional power button for the X11 Requires 10 M3x20 to assemble, and optionally a further 2 screws to attach the two base pieces together.…
I made this USB replacement for my 4 TB Seagate HDD. 2.5" portable drive.
a little crude hack job but functional, ~4.5mm larger internal space for other usb-c cables, see pics I print with support for the usb-c cable run underneath
There are plenty of different mods for the larger creality tent enclosure, but the one I bought has 8mm rods and different connectors than most of the mods that have been desgned & uploaded.…
INFO A quick and easy way to mount your Logitech C270 camera to your enclosure tent. I designed this camera mount to be used with the Aukuoy enclosure from Amazon. It should also work with any other enclosure using rods with an 8mm…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl - v1.0 is used for coupling 100/125/150mm - v1.3 is used for coupling…
If you have a Flashforge Adventurer 5M, you likely noticed that there are bays in the back for a filterable exhaust. I didn't really feel like going down a rabbit hole of hooking up fans to the printer's power supply, as I just got the…
This is a bottom enclosure for StageHacks FADER_8 MIDI/OSC Controller : https://www.stagehacks.com/store/p/fader8 I was a bit worried by the "all open" design and wanted something more protective for the components. To install it, you…
I didn't like the angle of the lcd screen on my Sovol SV08, so I modeled this bracket to change the screen angle. Updates Update 1: I included another version that should work okay with the enclosure lid. Update 2: Added a new model that…
This template allows for mounting FS.com FHD cassettes to a standard SME (Structured Media Enclosure) system. Printed using standard PLA on Bambu A1.
An enclosure for https://www.aliexpress.com/item/1005008329492387.html 5 port PD,QC module and a pair of 90x60mm, 6mm thick batteries. I used small 1,2mm self-tapping screws to fix the board. The window made out of epoxy. The lid snaps in…
This enclosure was built to house the ESP32 and sensor that measures humidity, temperature, pressure, among other things for use in HomeAssistant. You can print in PLA as it is used in room temperature indoor conditions. This is designed…
