1 / 11
Enclosure for Waveshare ESP32-S3-ETH OV2640 CAM LAN RJ45 POE
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple case for the Waveshare ESP32-S3-ETH with slots for the OV2640 CAM and space for the POE module.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 462
- Makes
- 0
- Views
- 2,486
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is an enclosure for this board from Waveshare with POE-module and OV2640-camera which you can get on Ali and other sources.
not fancy or pretty, but functional, lightweight, space-saving and filament-saving ;P

Addons
I also made an adjustable wall-mount for the camera-ESP, which you can find here.
In case the top and bottom part, still don't hold tight enough for you, you could consider printing just the clamp from the mount.

Assembly
- drop board into big bottom part
- close case by clipping-in top lid
- optional: plug in USB-C protector

Features

- slot for camera-cable
- space to mount camera
with double-sided tape - accommodates POE module
- breakout for antenna
- hole for WS2812 LED.
(image on the right) - extra USB-C plug for darker LEDs
- NO GPIO access yet, but there is a remix that exposes some pins.
Printing
- any material
- layer height: ≤ 0.3mm
- nozzle size: ≤ 0.6mm
- no support
- no brim
- infill: 25% aligned rectangular (or something else that enables smooth surfaces)
History
2025-07-13: v1, still somewhat WIP
2025-07-15: v2 improvements:
- better LAN Act-LED shade
- hole for WS2812 LED
- bigger clip and notches for stronger fit of top to bottom part
- USB-C plug for additional shade of LAN Act-LEDs and protection of USB-C plug