Counting matching models…
Caja con tapa y soporte de Powerbank para integrar la placa ESP32Steamakers con modulo Lorawan y pantalla 1,3 OLED de Innova Didactic/Keyestudio. Tambien para pantalla OLD 0.96" Nota: El soporte para la Powerbank necesita soportes para su…
Changed the original lid to fit when SD card is inserted.
This is a simple enclosure for Guition ESP32-S3 display. Designed to be printed with 0.2mm layer height without supports. Requires 4 M3x8 screws. The screws goes directly into plastic. I printed mine with ABS and even with plastic…
Housing made for ESP32. There no mounting holes for the esp32 because the esp32c3 versions from Seeed doesn't have mounting holes zo i fix them in place with a little hot glue. My first remixing a model without any experience.
Case for the 4channel ESP32 Board with cutouts for access to the screwterminals and GPIO headers. Basic information is written on the lid. -print with PETG -layer hight 0.2mm, no infill Two M3x12 screws are needed.
Case for the Olimex ESP32 POE ISO rev K Remixed from https://www.printables.com/model/264188-olimex-esp32-poe-iso-case
A handheld case for an ESP32 S2 Mini with 1602A LC display and a 4x4 matrix keypad. There is a lot of space if you'd like to add a battery. Display, S2 Mini and the case should be screwed together with melt-in M3/4mm threaded inserts. The…
Remix of ESP32 Cam Case by @bkgoodman_108348. Back plate adjusted with 20º and 30º angles. Modified in Rhino.
Cool case for your NerdMiner running on a LilyGo T-Display. This is my very first design ever! It's a tight so be careful not to break the reset button on your T-Display. Model doesn't require any screws.
A compact enclosure for the arduino ESP32 DEVKIT V1 (30pin) (ESP-WROOM-32).
About I've got two Adafruit ESP32-S3 Reverse TFT Feather and without any enclosure or stand it is a bit inconvenient to use them, especially if you have a lot of other tools on the messy table :D Thus I mixed gridfinity bin 1x2x2 from the…
Description Simple design of enclosure for WLED ESP32 Enclosure with microphone Used components: ESP-32S Development Board 2.4 GHz Dual Core WLAN WiFi https://amzn.eu/d/9D1nSNl SP32 Breakout Board GPIO 1 into 2 Compatible with 30 Pins…
Dew Point Ventilation This is a case for another approach of dew point ventilation. Dew point ventilation means that you measure the temperature and humidity inside and outside. To decide whether ventilation is useful or not, you…
Follow instructions of the original post. Changes are described here: It is recommended to use M2 inserts with 3.5mm diameter for mounting the top plate, the button holder and the throttle stick holder. 3.2mm is too lose. I used M2.5…
This is a housing for a XIAO ESP32 S3 cam for a Prusa XL. Print out all parts according to your color preferences. To assemble the case, use some glue and glue the joint ball part to the bottom of the case. Then stick a suitable magnet…
A casing for the Xiao ESP32 S3 Sense that is compatible for most Prusa printers, as the mount is attached to the 3030 aluminium extrusion. Notes: I won't be covering the software section of this camera, but you could follow this guide:…
A very simple remix to allow mounting of an ESP32 camera on top of an x-axis motor cable protector .
how to build Solder an ESP32 to a Came Top-432 remote. Those remotes use a similar case and should have the same PCB form factor. I tested with a Top-432-EE model. On the remote PCB, solder 3V3 or 5V (depending on if your remote use 2*3V…
Case with a snap-fit lid to fit a 30 pin ESP32 breakout board, you'll find these all over aliexpress/ebay/amazon, etc. The board I designed it off of is ~ 66.28mm wide x 63.3mm long and the PCB is 1.5mm thick. I made the following updates…
A simple click-lock case for an ESP32-S3 SuperMini. Nicely fitting, snug without being tight, with a small cable hole at the back for WLED or any other cables you want to run externally. The click-lock is tight and made to be that way for…
Snug snap-fit case for an ESP32-WROOM 38-Pin devkit USB-C. Hole at the back for a cable (can easily fit a 5mm wide 3-core or anything similar). This was designed for a specific ESP32 board I got from Ali and couldn't find a nice fitting…
*Updated profile to v2 - improved design which is now easier to take apart (better gap tolerances, and an indent at the back to prise it apart without damage). Snug click-lock case to build an mmWave sensor for ESPHome using an ESP32-S3…
A case for the ESP32 with integrated Wifi and OLED display purchasable from here: https://www.aliexpress.com/item/Lolin-ESP32-OLED-V2-0-Pro-ESP32-OLED-wemos-pour-Arduino-ESP32-OLED-WiFi-Modules-Bluetooth/32822105291.html Designed to…
A case for the ESP32 with integrated Wifi and OLED display purchasable from here: https://www.aliexpress.com/item/Lolin-ESP32-OLED-V2-0-Pro-ESP32-OLED-wemos-pour-Arduino-ESP32-OLED-WiFi-Modules-Bluetooth/32822105291.html Designed to…
I made this model on fusion 360 for this model you need to use m3 screw i dont have screws but i use resin for it you can print it with petg,pla,abs,asa i also add f3d file for editing
A modular smart lamp powered by an ESP32 running WLED , with addressable LEDs wrapped around a central core. The outer diffuser and decorative shell soften the light and give it a clean, modern look. The lamp is perfect as an ambient…
I've built a case for my pcb that holds 1 esp32 and 2 nrf24l01+pa+lna I've attached photos so the exact placement of the esp32 and 2 nrf chips can be seen. The case also have 2 holes to store the antennas safely. The case have a small…
Seeed Studio XIAO ESP32-C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivities. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.…
design to hold an ESP32-C6-WROOM (such as https://www.amazon.com/dp/B0C61JTNJ6 ) I couldn't find a box i liked and made this one. it also comes with a backing plate with retaining studs to mount it on the wall with 3M command strips (or…
I made another ESP32 camera housing with attachment to the aluminum profile of the Prusa Mini. The USB cable is routed downwards in the aluminum profile. I printed everything with standard settings without supports but with 3 perimeters.…
Seeed Studio XIAO ESP32S3 Sense leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB…
Seeed Studio XIAO ESP32-S3 leverages ESP32-S3's 240MHz Xtensa 32-bit LX7 dual-core processor, supporting both WiFi and BLE 5.0 wireless connectivities, a 2.4GHz Rod antenna, allows for deep sleep mode with power consumption as low as 14μA…
No supports needed for V1. V2 needs supports. Print face down for a smooth front side. The display fits in the case by friction when printed on my Prusa Mini+. 02/03/2026: V3 - Added a small inward chamfer sloping towards the screen.
I needed a case to use my XIAO ESP32 as a ESPHome Bluetooth proxy. You will need a 2"/5cm UFL to SMA cable and an antenna. Make sure that supports are completely removed around the seals - some bits tend to stick which will prevent the…
ESP32 C3 SuperMini pendrive case for USB connection Made in Autodesk Inventor (ipt file included)
You will need: 4 M3*8 screws. An IPX/UFL to SMA connector. A 0,96 inch OLED display. The simple WiFi / Bluetooth antenna which comes with the ESP32S3 / Wio-SX1262 set. 4 wires and a soldering iron for connecting the display. Connect the…
a little crude hack job but functional, ~4.5mm larger internal space for other usb-c cables, see pics I print with support for the usb-c cable run underneath
ESP32 Bluetooth Maus für Fusion360 Es Gibt 2 Deckelversionen und 2 Drehrädchen. Die 2 Deckelversion hat beide Tastknöpfe aus dem ESP32 nach außen geführt. Eine seitliche Klappe um das USB Kabel zum Programmieren / Oder Seriell daten…
This enclosure was built to house the ESP32 and sensor that measures humidity, temperature, pressure, among other things for use in HomeAssistant. You can print in PLA as it is used in room temperature indoor conditions. This is designed…
Esp32-s6 case with lid. It's a very tight fit might need some light sanding and pushing depending on the PCB cut.
The switch_mount_bdy_v4.3mf is an mount for switch with other dimensions than the original model.
This model is to provide a good looking functional case for the Waveshare ESP32-S3-Zero board to be operated by AA batteries. While this was specifically developed for the [ESP Rowing Monitor](https://github.com/Abasz/ESPRowingMonitor)…
found these led drivers that are an all in one for wled, small , made this deeper to allow for the controller to fit fit, had to drill hole to fit plug, might mod a hair deeper and make hole better for power plug. thanks to OP for making…
This is a straightforward two part case for the ESP32-S3 CYD 3.5" display. For assembly you'll need - (4) M3x4 heatsets and (4) M3x8 SHCS.
Wall mount your JC8012P4A1C panel in style with this bracket! Avoid cutting into your wall to get that flush mount. Two versions are included: a landscape and a portrait bracket. A small hole is placed at the bottom right of the mount to…
Zigbee Macropad – 16-Key Wireless Controller for Home Assistant A compact 16-key Zigbee macropad powered by an ESP32-C6 , designed specifically for seamless integration with Home Assistant via Zigbee2MQTT . This macropad provides tactile…
Redesign of XIAO ESP32S3 & Wio-SX1262 case to accommodate drone usage. This setup is appx 44g total printed in PETG. This will make most drones in the sub 250g category above 250g. Please follow all laws applicable to your usage. You can…
This is a mount for a TinyGS.com ground-station with a QFH antenna form for an ESP32 / LILYGO T3_V1.6.1 433MHz Lora module and QFH antenna form from:
Full video is on my YouTube Channel : https://www.youtube.com/@SmartHomeCircle
Desk stand for Waveshare ESP32-P4-WIFI6-Touch-LCD-4C based on my other design for the 3.4" version
Designed to totally encase the ESP. The pins are still accessible. The buttons are too...technically. I don't need to smack the RST or BOOT button so no design consideration were made. They are still poke able with a stick. There are…
RadiationD v1.1 (CAJOE) for Home Assistant using ESPHome and ESP32-C6 Attention: The ESP32-C6 cannot handle 5V on the inputs. Add / exchange the resistors as shown in the images. ESPHome code taken from here Things Used: (non affiliate!)…
You can grab a code and get more info about the project here https://github.com/Andryushik/shades_homekit_esp32 Created for IKEA Fridans Roller Shades. Print it with a minimum of 4 walls and supports. I used ABS+.
I modified the bottom to attach the antenna. See Original model to get the case top. No supports. Original Case Designer: Robert ATS Duct @RobertATSDuct_791555
Стационарный кѾрпус для Heltec V3-V4 c воможносью установки энкодера, клавишного переключателя, двух аккумуляторов 18650 либо один 21700. Клавишный переключатель: https://ali.click/hl1puq Рекомендации по печати: Высота слоя 0.2 Без…
First, I mounted the ESP32 camera on the printer using the “MK3S+ ESP32 Cam Camera Mount” by @detlassnake_289499. After being dissatisfied for a long time, I wanted to mount the camera on my PLATSA enclosure, so I developed the base plate…
I made an ESP32 Lolin S2 Pico case :) Normal version: pins are inside the case Short version: pins are outside the case Do not press the buttons when the ESP32 is not in the case. The buttons will break, as they are very brittle. Gruess…
This is a fully parametric Fusion 360 design for a 3D-printable enclosure intended for ESP processors (ESP8266, ESP32, etc.) mounted on breakout boards. All key dimensions and features are controlled via parameters, allowing you to easily…
ESP32-S3 Wroom Cam Box and ball joint M3*6 crew to add the ball joint to the case. no suport needed to print 15% infill. Only the JiontEx will need support Fusion 360 link to the project https://a360.co/3Np1eX2 Ball Joint…
This design uses 3 cylindrical magnets (dia: 6mm, height: 4mm) to make it possible to mount an esp32cam housing to the prusa Core One + metal frame. Print orientation: see pictures installation: dovetail opening points towards top slider…
Download other parts from original model. Official Sensor Mount from Sensirion : Integrated the sensor retainer using Sensirion’s official STEP model for a perfect fit. (But weak layer adhesion) ESP32 mount: Designed to house the Xiao…
Holder for ESP32-WROOM-32 (USB-C) Box. Can be attached to the surface with glue or double-sided tape.
I modified one of the 3D objects provided by Zdendys to make it larger. The purpose is to accommodate the power card supplied with the ESP32 CAM, allowing the system to be powered via Micro USB without soldering or connecting to the pins…
This is a housing that can be used to mount six safety switches, including a XIAO ESP32-XX MCU, underneath a desk. The switches can be installed flush within the enclosure. Their status can then be read by the integrated XIAO ESP32-XX MCU…
This is a simple and compact housing designed to hold two standard 16 mm buttons or switches. It is intended for use with an ESP32, Hackerboard etc. The housing mounts directly to the Core One frame using existing holes—no drilling or…
This is a case for ESP32-C6 with Dual USB-C ports and a mount for DHT22 sensor. The ESP32 ive used are in the photos and i recommend after print cooling it down, because its very easy for it to warp.
I designed this due to not finding a fitting case for my last Project. It has a cable outlet with a 16mm thread for a cable gland and a hole for the usb-c port. The NodeMCU-Esp32S is supposed to fit from above, stands on two little towers…
I had a spare base from making my son a minecraft lamp, and my daughter wanted a unicorn. I struggled trying to make the walls of the unicorn thinner, but had no luck. Ultimately just had to print with 2 walls and 5% infill, turned out…
Adopted an existing wide breadboard model for ESP32 boards from instructables to my needs - only 30 rows instead of 60. 3 pc. M3 Screws are needed See: https://www.instructables.com/Fixing-Breadboards-for-Wide-Microcontrollers-Pico-/
This is an ESP32-CAM box, made specifically because no other case existed for what I needed
This open‑source ESP32 air purifier uses a 1"x16"x25" HVAC filter with multi‑fan airflow, PM2.5 sensing, and a responsive touchscreen UI for Auto or Manual control. It pairs a compact control module with web diagnostics and tunable…
This project is a custom 4-key macro keyboard with an integrated 16x2 LCD display that shows real-time CPU and GPU temperatures . The device is based on an ESP32-C3 microcontroller and communicates with the PC via USB-C . Temperature data…
Modified my LILYGO T-Display S3 case to be used for General use. back case allows for installation of 102535 Lipo Battery and can accept upto 102545. Switch is for a Slider Switch SS-12F15 with 4mm switch height - can be found anywhere.…
I used fuzzy skin to hide the seams. Set the bottom fill pattern to concentric if you choose to print the one with the brim. Settings: Material: PLA Bed temperature: 57°C Nozzle temperature : 195°C Nozzle size: 0.6mm First layer height:…
ENG you will need 2 types of Double-Sided Tape, I use 3M VHB 4910 12mm Deli-E30407 Double-Sided Tape with the "E30407" you need to tape the "triangle" to de esp32cam board and cam with the "3M VHB 4910" you tape the esp32cam to the "body"…
This case is designed for the NodeMCU ESP32 S Dev Kit with dimensions of 54 × 25 × 15 mm . It features a built-in PCB support strip to securely hold the board without additional tools, precise cutouts for the USB port and SMA antenna…
This is a straightforward two part case for the Freenove ESP32 CYD 3.2" display. For assembly you'll need - (4) M3x4 heatsets and (4) M3x8 SHCS.
Case for the slightly longer, 40 pin version of the WROOM32 Bluetooth Module. The lid is push fit and the board fits perfectly within the hollow - you may need to scale depending on your printer tolerances. Printed in PLA with no AMS - I…
Case for ideaspark 1.9 display https://www.amazon.com/ESP32-Development-1-9-inch-LCD/dp/B0D6QXC813 Update 26.7.2026 added version with buttons I used the box for my project: https://github.com/MarioHP/telemetry-monitor-flasher
This is a housing for the W8BH morse tutor. it is designed to fit the esp32 version where the esp32 board is mounted on female headers. When inserting the board, you have to flex the housing away from the switch on the left side of the…
Introducing a camera I created that turns reality into pixel art! 👾📸** This camera is designed to capture unique, low-resolution, retro-style pixel art photos. Both the 3D model and the code were fully written by me — this is the very…
Space for: 4 Channel Mosfet board Mini 560 Powersupply board Esp322 Super mini I held my modules in place with hot glue Space for cable ties to strain relief the wires Prints without supports etc,
This is a updated enclosure for a ESP32 and development board. It has a snap fit lid, And the board screws into place. I made it to house my WLED controllers. It has wire guides around it also and a screw in place clamp if needed
Prusa Mini 3D Printer ESP32 Cam Holder This design is based on the readily available ESP32-CAM module. Together with the PrusaConnect ESP32-CAM firmware it is possible to have the pictures transferred to Prusa Connect in real time. The…
The C6 can use an internal antenna so the antenna holder was repurposed for attaching the mmWave sensor. The lid fits on the base a bit loose so I applied some superglue to the perimeter of the lid to attach it to the base. I used some 3M…
I love this system and I really like working with a breakout board, so I created a module that allows you to use your breakout board with this system.
Same as my previous remix but with the addition of a 1.28" round gauge mount. Now you can design gauges anywhere!
Ein Gehäuse für ein ESP32 mit Kamera-Modul und USB-Platine. Bei mir liegt das Gehäuse eng an, ggf. muss es minimal vergrößert werden. Eine Variante mit externer WLAN-Antenne:
Ein Gehäuse für ein ESP32 mit Kamera-Modul, externer WLAN-Antenne und USB-Platine. Bei mir liegt das Gehäuse eng an, ggf. muss es minimal vergrößert werden. Das Gehäuse ist etwas breiter und höher als die eigentliche Platine, damit…
Mounts an ESP32 WROOM 32 dev kit board (bought mine from Elegoo) to DIN rail using the below DIN rail clip. Uses M2.5 SHCS fasteners. Self taps into plastic.
A compact ESP32 WLED enclosure that I made - Powered by USB-PD. Just stick this somewhere under your desk. Feel free to remix on TinkerCad . PARTS LIST ESP32 USB-PD Trigger WS2812B RM065 Pot 2 X Tactile Push Buttons 4 X M3*16 screws…
If you come looking here you probably know that those super-tiny buttons on the XIAO ESP32C6 are impossible to press for human hands. This clip-on cover solves that, it gives a nice area to push on with a good tactile response. Optionally…
Turn your ESP32-CAM into a magnetic camera for your Prusa CORE One 3D printer. This model is designed for Ai Thinker ESP32-CAM , HW Version 1 with an OV2640 camera . I recommend using a fisheye/wide-angle camera. Don't expect highest…
![ESP32 Cam Motor Joint & Cable Protection [remix]](https://media.printables.com/media/prints/1196289/images/8988748_49a4b33a-22e4-4770-afcc-59ca1efb7ee2_446e658b-d55a-461f-90c2-923195b0d872/854fb883-0c6a-404d-8c4e-f79df2ebc5e2.png)
