ESP32 Case with SMA Antenna Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact PLA-printable case with PCB support, USB and SMA cutout, and hex ventilation for 54×25×15 mm boards.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 47
- Makes
- 0
- Views
- 303
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This case is designed for the NodeMCU ESP32 S Dev Kit with dimensions of 54 × 25 × 15 mm. It features a built-in PCB support strip to securely hold the board without additional tools, precise cutouts for the USB port and SMA antenna connector, and hexagonal ventilation slots for improved airflow.
I intentionally did not add cutouts for the two buttons in the lid, as the cover can be easily slid off when button access is required. Both the case and the lid can be printed in any color you prefer. I chose a white cover, as it allows the status LED to shine through nicely and gives the enclosure a clean, elegant look when mounted on the wall.
The design is optimized for PLA printing, providing a snug fit while keeping assembly and usage simple.
Example: In my case, I used an AZ-Delivery NodeMCU ESP32 S Dev Kit | Wi-Fi, Bluetooth | dual-core CPU microcontroller with dimensions of 54 × 25 × 15 mm.