Counting matching models…
I use these mainly to close herb bags, but I've found they're handy for all sorts packs, like breakfast cereals, tea leaf bags, etc. The included 3MF has 10 of them. Just "right-click - Set number of instances" in PrusaSlicer to change…
I like the modular design of FilarworKs Master Spool, but for me it was lacking some features. I wanted an area to stick a label to without it being unsupported at large portions My refill-filament was too wide for the standard…
Qidi Plus 4 Tool head with small triangles were added to the front cover for air flow, cosmetic looks. Triangles look small, however I tested this cover printing for several hours with no overheating. Please leave a “Like”, it helps me,…
Tray organizer for small items of no particular size. As you can see, originally designed to herd USB dongles. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2mm Linear Advance Infill: 20% Notes:…
I sculpted this body to be a body compatible with smart doll heads, specifically meant to resemble a trans masculine person, because that's a representation I don't see a lot in the bjd hobby. This is the first body I've sculpted and so…
Size base 140x109x19mm. Size holders 52x52(or 104)x107(or 77 or 47)mm. Filament need cca 70-90m. Next model:
It's a small tray for computer screws and similar screws
Version 2 Neu: Höhe 150mm - kompatibel mit Boxen Höhe 50 + 100 mm / gleiche Verbinder New: Height 150mm - compatible with boxes height 50 + 100 mm / same connectors…
This is the adapter I designed to attach the Smart Orbiter 3 (Revo Edition) to my Hypercube Evolution. It should fit the standard Hypercube Evolution carriage with 3mm dowel pins. It should work as well for the original Smart Orbiter 3…
I did a remix of two great designs to create a taller riser because my ptfe was rubbing on the glass after installing the cyclops extruder. You can print 4 corners without the holes if you are using the stock filament sensor. The text is…
Remix of @wizzo TapTo case to fit the smaller module available on sites like AliExpress
Inspired by the LTT magnetic cable management holders I designed these to go with 16 mm diameter x 5mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets:…
I wanted a way to get some more interesting shots for my Youtube videos, so I designed this small adjustable dolly for my GoPro. Hardware Required: -2x M4x6 Hex Screw -7x ¼ x 18mm Hex Head Bolt -2x ¼ Nut -4x 608 Bearings Supports only…
I made a small wall cabinet that uses an Ikea Skadis - stile front panel. A TP-Link 8-port switch ( TL-SG108E ) hangs on the lower side. The upper side is suitable for accessories. The wooden cabinet has long sides measuring 360 mm x 160…
i made this button as a part of a larger project, it uses a standard cherry-mx style key and a 45mm outer diameter RGB ring (model is parametric so this can be modified). This button serves as an attractive option for important…
This project was created for the Samsung Galaxy S24 Ultra phone, complete with a medium thickness transparent cover. There are various phone grips on the market but I wanted to make one tailor-made for the Galaxy S24Ultra (which is…
Elko plate holder for SmatThings. The button still works when it is in place
OnePlus Smart Watch 2. Charger Stand, designed around an after market charger from Amazon, https://amzn.eu/d/i7fQQXG
This planter is perfect for anyone who loves plants but might not have a lot of space! It’s also great as a decorative piece for your home. The build uses a 25mm dowel and 3.5x13mm chipboard screws, making it sturdy and simple to…
The Smart Greens Micro Drip Ring for 90mm Pots. Tube Connection is 9,5mm outer diameter. Print with: 0.4mm nozzle no supports needed 0.1mm resolution infill 30%
I wanted to mount a screen on my Skadis. But I couldn't find any reliable 3D printed swivel solution (I need the screen to be adjustable). Instead of trying to come up with a 3D design, I opted for a reasonably priced Ball Joint module…
Can be printed in whatever material you want. Bronze filament with light coat of blue/grey stain is looking good… The versions in the pictures is printed in eSUN ePLA Metal Antique Brass
Qidi Plus 4 Tool head with small triangles were added to the front cover for air flow, cosmetic looks. Triangles look small, however I tested this cover printing for several hours with no overheating. Please leave a “Like”, it helps me,…
This vase can be mounted directly to the wall. It can be used both with or without an additional inside vase for the plants. No supports needed. The vase has two shells: An inner shell where the plant is placed. This shell has drain. An…
Replaced one of the vents with this design for this Smartphone holder of Amazon DE - Handyhalterung Hakenclip-Design
This is a simple version for a pliers holder that can be mounted on the wall. The holes from the original design are still there but it can be mounted using good quality double sided tape and it should support the weight correctly.
Found this model of a human heart and wanted to make it into a planter for succulents/small house plants!
I hope others can benefit from this. This is my first design using OnShape. I think it looks pretty good and it prints well. This version will measure out a little bit less than 1 tablespoon. Printed using inland PLA+ (FYI - Not…
A replacement hopper for the Smart Grinder Pro, I was unhappy with how small the opening and volume of the hopper was and I am not a fan of weights to prevent popcorning. It is sized to fit this bellows at 100% size…
I created a custom mini trash can with swing lid to attach the swing lid i use 2mm steel nails printed in PETG and PLA with no problems supports only for the lid. printed it vertical like in the 3mf file
Meet The Stingray —a charging dock that combines form and function like a pro. Bonus: Apple Watch users, don’t feel left out! Find the STEP file so you can customize your way into the party . Tired of losing your charger under piles of…
This small stud for the large lego wreath has added small detail with a snowflake.
This is my LED Daylight Holder to mount it under the extrusion for my RatRig VCore4, but it could also used for other printer like Voron and so on. I used the Vector3D LED Stripe. I made and used it for my V-Core 4 with full closed…
Rubik Küpüm için minik bir stand - Rubik Küp Standını SolidWorks - Bambu Lab A1 Combo ile tasarladım ve 3D yazıcımla hayata geçirdim.
english :If you are looking for a pulley that doesn't make noise for your cr10, and that has conical tabs, here is your file, I looked online for a compatible file for the printer and couldn't find it, so I decided to model it For those…
Layer hight for the strings work should be 0.3mm. For others, don't care. Feel free to contact me if you need support on printing this model and modify the model. I use PrusaMK4, 0.6mm nozzle. christmas tree-3-0 v0: no holes for emitting…
They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid. One is with SUNLU written on the top, other one without text. EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.…
I bought these blinds very cheaply from amazon and automated them using Nema17 motors and ESPHome. Many cheap blinds come with exactly the same layout. You will need some experience with electronics to make this project work. Components…
I like the modular design of FilarworKs Master Spool, but for me it was lacking some features. I wanted an area to stick a label to without it being unsupported at large portions My refill-filament was too wide for the standard…
Hi All, This model is something I've scratched up to allow you to mount your F1 Lego car vertically whether that be on your wall, bookshelf or any other surface.
Purpose designed part, may not fit your rifle exactly as the Stevens marksman rifles were built in the 1930's and the wood stocks may not all be the same. i.e. mounting hole locations, profile, curvature, etc. Original crumbled and was…
After digging through my set of different bolt and screw containers, I decided enough was enough and designed a quick and simply storage shelf for the boxes. Model is pretty thin and designed to use as little filament as possible while…
Small Plant Pot for cloning (optimized drain holes) Update : New files added Eject Tool Pot Cover Stand for 12 Covers Print without support
Christmas Card with a Small Church Puzzle Add a touch of magic to your Christmas with our Christmas card featuring a small church puzzle. Features: Easy to print and assemble : The church can be easily printed, and all the parts fit…
2 versions de suport antenne pour JeNo 5". Une version pour les antennes SMA et une version classique. Les deux versions s'impriment debout avec juste un petit tree support sous la partie deversante horizontale à l'arrière.
Kyocera Knife Replacement Handle - for small Ceramic Knife (all Purpose) of GEN series and probably NATURAL series as well, mine was the 13cm Blade.
A 3D-Printed 3-Piece Tree is a creative and modular decorative object designed to capture the essence of a tree while showcasing the versatility of 3D printing. The tree typically consists of three interlocking or stackable parts: Base…
Description: This 3D print is an insert into full or empty filament spool which features 3 bolts and flexible parts to accommodate different tree trunk diameters. It is suitable for rolls of filament that have inner hole diameter of 50 -…
I dont want to buy an acrylic sheet for this pixelclock so i decided to print it on my own as many others did with other clocks. Layer heigth: 0,2mm Infill: 100% Infill pattern: Lines Please use white PLA and for best results a smooth…
Small Parts Organizer Drawer 4x6 (Remix with Two Dividers) This remix is based on the original Drawer 4x6 for the Small Parts Organizer ( https://www.printables.com/model/1085458-small-parts-organizers ). Modifications: Two dividers have…
I have my Voron installed under the desk, making access to my filament sensor difficult. Therefore, I decided to relocate it to a more convenient place. However, I was unable to use any existing mounts as most of them are dedicated to the…
SMA cap designed to cover connectors on my FPV goggle receivers. SMA cap: depth 6 mm / Inner Diam (ID): 6,2 (tight) or 6,3 (fit) 6,4 (loose) mm / wall THK 0,6 mm. Printed ID 6,3 mm for my self, best fit. Printed in Sunlu TPU 95A…
Transform your jigsaw puzzle experience with this innovative stackable sorting boxes! Perfectly designed for puzzle enthusiasts, these boxes offer a smart and convenient way to organize your puzzle pieces by color, shape, or section. A…
This is a quick little hook that I made to hang the power cable for a wireless camera I have. We rent, so I can't do anything more permanent. it has a 0.8mm wall thickness. There are two variations, A shorter hook that can hold a small…
Parts needed: A Heltec LoRa 32 V3 board 2x M3x14 bolts 2x M3 nuts
1x5 Gridfinity bin for Wera Tool-Check Plus.
Printed in PLA Grid is lower profile due to Z axis clearance of the drawer Per j03y “Using the Prusa slicer fast .4 profile I changed the infill to lightning, top/bottom solid layers to two, and infill to 10%” If you want to generate your…
Spice racks for inside kitchen cabinets. Set composed of: 1 small spice rack for 4 units. 1 medium spice rack for 5 units.
Star Wars Armada stands do not display well taking up a lot of space, especially for the smaller ships. I designed a modular system for displaying the small to medium ships with a ton of possible combinations. Enjoy
Simple, easy to print kitten, can be used as board game figure. No supports needed. Easy to scale and print in any size.
Simple latch to hold the brew group in place for Philips Saeco HD8645 Xsmall super-automatic espresso maker. The housing of the HD8645 Xsmall is fairly flexible and allows the brew group to move around enough to push the puck bin out of…
Base on the original idea of Maple Leaf Makers , I made this mod for the new Smart filament sensor for Orbiter v2 . Had to redo everything so it's not really a remix of parts, but of idea. Print in ASA/ABS with Voron settings, no support.…
Easy and fast print to store your headphones on the desk. Hope you like the design and happy printing. Materials 1 x middle part 1x top part 1x bottom part 4 x screws Print instructions Print the middle part on the front and the rest on…
This is a bit toolcase. You can use PETG for the case, but the latches have to be printed with TPU. Use 2x M3x30 screws for the box and 2x M3x6 for the latches The screwdrivers can be found here: Screwdriver set for bits by SaSp |…
A small shelf for holding decorations and small items. It's made to be attached using the 3M easy attachments or any adhesive. I use them to display Lego builds and other small figures.
If you or a loved one has purchased a Smart 90 quad copter, I am sorry for you. For everyone who doesn't know what this quad is like, lucky you. It doesn't entirely suck, but it's pretty bad. But it also costs $20, or at least it did when…
Outer dia. 60mm Inner dia. 20mm Height dia. 15mm Wall thickness 1.5mm Holds around 80g of solder
I designed this to fit on top of my fuse box because it's near my front door. Other designs had too large of a top part so I made this one much smaller to fit.
prints in under 10min at layerhight 0,3 ( see print image) 2 perimiter as of the roughness 3 bottom and 3 top layers Color as you like !! This is all Black then DarkGray some stones Brown and terracotta then Drybrush some moos in ( floor)…
This is designed to use ¼" shank bits by epoxy gluing them into the handle. You can print a bunch of them and glue in different types and sizes of bits to each one, or do what I did and print just one and glue in a magnetic bit holder.…
Simply print and stick to the bottom of your blind opener to stop your blinds getting caught. Designed to fit the Moes ZigBee blinds opener, should fit others too. Printed narrow so the ports and open tab can still be accessed. Scale it…
Here an adapter for a smaller vacuumer - print in TPU. Alter the Step data to fit your vacuumer
Device that holds on to your smartphone while charging. Low support on one side for easy access to yout phone while charging. If you prefer acces on the left side it can easily be mirrored in the slicer. Inside measurements: W: 79mm H:…
Polestar (Volvo) Waterproof Small Key Replaceable Shell, 3D Printed. When the battery of the small key fails, you can open the shell and replace the battery yourself. The original battery can be directly installed in the replacement…
Smart Crochet Panel – 100% 3D Printable & Modular This fully 3D printable crochet panel provides a versatile and expandable way to store and stretch materials—everything is 3D printed, no extra parts required! No screws, glue, or…
Salvador Dalí Salvador Dalí (1904-1989) was a prominent Spanish surrealist artist known for his eccentric behavior and dreamlike imagery in his work. His most famous painting, "The Persistence of Memory," features melting clocks in a…
The hinge screw is a 3mm x 30mm hex, and the latch screws are 3mm x 20mm hex. I added the fusion360 model file so that you can use the hinge or latches for your projects. They are separate components and can be copied into new designs.…
1x3 Gridfinity Adapter for HOTO Smart Laser Measure Pro This 1x3 Gridfinity adapter is designed to securely hold the HOTO Smart Laser Measure Pro , keeping it easily accessible and neatly stored in your Gridfinity setup. T he snug fit…
Elegant stand for SmartAir / Qingping CO2 & Temp & RH Monitor. It provides better readability when the monitor is on the table. Works also with other sensors/monitors.
Smartphone Stand Rugged Design - Supporto da tavolo per Smartphone Integrated charging / headphone cable passthrough Optimized viewing angle Rugged Design Update 12/02/2025: Added B Type, Smartphone Stand REV1 (Geometry clean up) All our…
durante il riscaldamento del filamento, microparticelle possono essere rilasciate nell'aria, quindi il filtro aiuta a mantenere un livello più pulito dell'ambiente; si consiglia pertanto di aprire le finestre durante la stampa per far…
Scaled down version of my 3d printed mini tool box. At only 187.5mm wide, it will fit comfortably on the Ender 3 and similarly sized printers. For those printing with the BambuLab AMS or similar units, print profiles with the color…
This is a simple wall mount for holding phones and/or an Apple watch for charging. For the Apple watch it has a bed that fits the charger perfectly. One phone can stand upright, another can either stand upright or lay on the side (cable…
A disc with 6 hooks for fitting small items such as keys. This will need support but wouldn't need too many.
Intro This is a super-mini wing bit holder with a nice handle! Try it! You will love it! PS: The tool was designed to hold the bit rather tight - it will get worn out when you use it a couple times. Use pliers or a thin nail (opening on…
This is a battery pin protector for e-bikes (Pedelecs) with the Bosch Smart System, which has a new battery connector. It is intended to protect the battery connector when the battery is removed or your bike is equipped with a second…
Summary This is a model of a Smart 450 / ForTwo in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the car…
