Counting matching models…
Video by Teaching Tech - Teaching Tech was kind enough to make a review of this Bench Mountable Vise. It has some great info on downloading and assembling this design. !!! LUBRICATION: This design will not work without lubrication. I use…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET
Designed with a spring-loaded snap mechanism , it allows quick access while keeping cables securely in place. Function The mount features 5 slots , each suitable for cables up to Ø7 mm . To open the mount: Press the textured side outward…
It can hold heavy backpacks and, for no additional cost, lightweight backpacks too. Perfect for students who have bags full of heavy books. For best results, print in PETG with 15% infill. No supports needed. 9/9/26 Update V2.1 has been…
Stand to mount a Thermaltake PR22-D5 reservoir/pump combo to a 140mm fan (or fan mount). The long axis of the reservoir is offset horizontally from the axis of the mount points, this being designed for mounting to the bottom fans of my…
Крепление для монитора на трубу 25мм VESA 100X100
Sonos Beam Mount for Apple Studio Display (height-adjustable stand) A one-piece bracket that hooks into the cable slot of the Apple Studio Display's tilt- and height-adjustable stand and holds a Sonos Beam (Gen 1) right below the display.…
For the leg mounted stabilizer bowl, use any one inch nylon velcro strap. Here is a link to one below: https://www.amazon.com/dp/B0B567TCHF If you would like me to print one for you, check out these links:…
There are two models in the download, one with cutout and one without. This cutout is made for the clearance of the nut for the Z-axis pom wheel. I have made this for the EZR Extruder, for straight filament paths. Print it on the side…
Designed this phone adapter for a RAM mounting system. Included is a version that supports a Galaxy S24 phone with a slim case, as well as a Google Pixel 6. I'm happy to make mounts for other phones if you can help me by providing the…
Designed for M3 countersunk screws, and designed to flush-mount an Anderson SB50 plug.
Print in TPU. You'll have to trim the plastic mounting plate down to get it to fit. As for the capacitor, I just used a 5.6 uf one. Stock came with 4.7 uf.
Print these instead of the default arms if you are using the Bigtreetech Manta M8P (V1.0, V1.1, V2.0)
A home for your Ryobi HP54L 4v Screwdriver and its to best bit buddies. They can all now hang out on a multiboard near you.
I made the railed version first and thought it might be cool to do an Aimpoint T1/2 footprint version (a bit like the real 30mm Aimpoint mounts KAC made) so I designed my own. Designed to fit on the VFC KAC MP5 rail fitted to a WE MP5,…
Unable to mount a mobile radio in a Tesla Model 3 or Y, I designed this bracket to cleanly and unobtrusively mount a radio head and speaker. Also includes a mic hook. Affiliate links below. Print with 100% fill. Assuming you already have…
Simple toilet paper roll holder with a phone shelf that uses a separate mounting bracket to hide the screws. Designed with optimal layer orientation for 3D printing to ensure the roll holder part is less likely to snap off (layer lines…
I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…
You'll need 2x M5 Nuts 2x M5x10 bolts (the kind you'd use for a bottle cage) 2x 4.8mm wide zip ties Print with organic supports. Press the two nuts into the nut cages put your water bottle cage on with the bolts, and it will just clip…
Wall mount for Kaisi K-2208 Paste Extruder Uses command strips on the back for mounting.
original design is by FabianP on Cults 3D
This is a mount I designed to house a replacement speed controller module that I used to replace the OEM control board on my Harbor Freight 7x10" mini lathe. The OEM boards have a tendency to burn out really easily when under load, so…
display mount that fits on to your laptop display. can be adjusted for sizing for your display as well as your laptop.
Like most 2nd gen S10 pickups and blazers, the plastic dash parts have broken into pieces. The recessed mounting holes on the underside of the steering column panel are a common break point. Rather than buy a whole new panel, I made these…
I had a side project needing a 20v source at a time when name brand chargers were unavailable except at scalper prices. The Elefly DCB112 solved the charging need very well for $20. But annoyingly and surprisingly it doesn't have a built…
Simple headset or headphone mount I modeled for myself. You might want to scale it up, as I printed a pretty small one for quick printing time. Also, don't forget to hang properly, I used a small wall anchor for mine.
Use 2 x M3 screws to mount your ThinkCentre Tiny to your 10 inch rack. The backside ports will be facing you for easy access. The 2 x 2½ drivebays are optional. Verified on models: M920q M920x M720q. I used this SATA controller in the…
Easy to print brackets to mount the Bambu Lab A1 mini build plates under the desk. Each brackets feature two screw holes for 3mm screws. There are two versions available. One holding tree steel sheets and the other holding five steel…
LGX Lite extruder mount for Dragon Burner with TAP adapter.
I wanted to attach a holder for my favorite build plate cleaner: https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder OnShape CAD Model:…
I really like the Blade-Tech Tek-Mount! But it is not only expensive, it is also larger than often necessary. The Quick Mount Micro follows a similar design, but scaled down and optimized for 3D printing. All you need to do is to print…
Mount for Ender 3 tags: BTT Pi TFT 43 3.5 Ender 3 mount BTT Pi TFT43 BTT TFT3.5 BTT TFT 3.5
Sensor mount for Sonoff SNZB-02P Outdoor housing: https://www.printables.com/model/1014449-outdoor-sensor-housing BOM 1x M4 threaded insert (https://cnckitchen.store/products/gewindeeinsatz-threaded-insert-m4-standard-50-stk-pcs) 1x M10…
NIX63111 Motor mount brace for RC10 Graphite. Fits also NIX91.
The holder is for smartphones with width = 7.3 mm and thickness = 9 mm, such as the Huawei P30 Pro. The bracket can be attached to standard connectors. The variants differ in the position of the connection surfaces. Since the Brodit…
Holes are sized for #8 screws. Also have a version for 3M adhesive tape. Added a USB cable holder.
This simple fan mount attaches a 5015 blower fan to 2020 or 1515 extrusion frame. I prioritized making the whole assembly thin and compact while still allowing the fan to swivel (nearly) 360 degrees. You can use this model to improve…
I wanted to have the filament run out sensor hang over the 2020 extrusion, as the Two Trees Bluer Plus uses an extrusion with a flat front but standard 2020 track on top. This uses M3x10 to self-tap into the plastic, and used the M5…
Very good instructions from Dave Wilson. Thank you. https://www.printables.com/make/2339640?comment_id=2339640
This is a mounting bracket for the Bigscreen Beyond Link Box . It's designed to (gently!) smush the link box against whatever surface you're screwing to, so don't tighten down too much! Hardware 4x 3x12mm countersunk screws Suggested…
Adapter: Bosch PRO Battery → TS10 Soldering Iron Mount (Press-Fit, No Glue) This adapter allows Bosch PRO batteries to be used with a TS10 soldering iron mount . The design intentionally avoids adhesives and instead relies on a tight…
Under desk mount for the Anker 564 USB-C Docking Station.
This is a motherboard mound for the Milo 1.5 with the same exact spacing as the LDO kit fly board comes with. You can keep the t-nuts in the same exact location. Small 3m heat inset from the back. Opening is 5mm for the heat insert
Trays are very handy but use a lot of space in the kitchen cabinet. If you put things in a tray for "better" storage purpose you will never use it because it's inconvenient. If you put it sideways and have 2 trays it's the same. You would…
A cleat for Ryobi's 18V One+ Leaf Blower (R18XBLW20), that connects to the Ryobi Link system. Also works for P21012VNM. Prints with no supports. Recommended settings: 0.20mm, Quality, PLA, No supports, Infil 15%.
Standard encoder mount for rack panel with 24mm hole. (Neutrik etc.) Material: Whatever you want, but for outdoor use ASA, ABS or PETG. Support: NO
An enclosed mount for a Nitecore TUP flashlight for picatinny rails. Ideal for airsoft pistol. All controls, screen and charging port are exposed so that you don't have to remove it every time.
Switched over to Inav on my custom built chimera 7 pro v2. I needed a better place to mount my gps and since I don't use a gopro made a GPS holder instead of gopro mount. The mount is compatible with 25x25 Beitian BK-252q but other 25x25…
This mount is made to attach to round helmets or round surfaces, use epoxy glue or 3M double sided tape. I made the bottom surface perfectly round with a radius that matches my Smith Scout ski helmet. Print with normal supports and sand…
Remixed the quick release holder into a wall mount that can use double sided tape or screws.
I needed a way to mount an esp32-cam case to a metallic surface and had some 20x4mm magnets laying around. I printed this in TPU and it turned out ok. To make it work: Pause the print and insert magnets at the layer just before recesses…
I was inspired by some aftermarket steel mike holder, but wanted to have a magnetic mount. The idea how to mount it was inspired by this AliExpress item . It is held in place by the grab-handle screw. I made it out of the Bambu PA6-CF -…
This is an AMPS mount for carpuride W603 (or W603D). Requires to be mounted from the back!!! You also need: 1 pcs M4 20mm washer (also called wood washer) 1 pcs M4x16mm panhead screw 4 pcs M4 nylock nuts 4 pcs M4x20mm (minimum) screws,…
This will allow you to mount the MTC10 on an AMPS mount (screws down from the device side) It also has a hinge to allow for proper tilting. You will also need: 4 pcs M3x12 screws 4 pcs M3 washer 4 pcs M3 spring washer (grover) 1 pcs M4…
A 19-inch, 2-part, modular rack mount for the new Ubiquiti Unifi USW-Flex-Mini 2.5G 5. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models…
For fast printing, I lacked rigidity. That's why I created this Y-motor mount for a belt 9 mm with a support bearing. This Y-motor mount is suitable for printers: Ender 2 Pro, Ender 3, Creality CR-10, Tevo tornado and Sovol SV01. Also,…
A model that provides a stable, sturdy, and completely reversible mount for your ADXL345 for input shaper calibration. Requires two M2x4mm screws. Print the model, but when it concludes keep your bed heated Screw ADXL345 into the mount…
I wanted to mount a removable sun shade behind the headrests using magnets included with common rear window sun shades. This setup allows the shade to be installed or removed quickly and utilize the hook to hold a kid's tablet case while…
This is a simple way to get some clutter off your countertop and keep track of those pesky pens and keys. The slicer view picture shows the print orientation. No supports required. I added a brim to the dovetail due to being tall and…
Inspired by the LTT magnetic cable management holders I designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets:…
This magnetic keystone single jack mount designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets: https://www.amazon.com/gp/product/B09ZLFNZ4S…
This magnetic keystone dual jack mount designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets: https://www.amazon.com/gp/product/B09ZLFNZ4S Inserts:…
I designed this for my Govee LED Light Strips, so I can easily cast the light upwards towards the wall at an angle for some accent lighting. There are holes equally spaced apart for securing to a surface via screws or nails. The strips…
The model has not been tested and may need further adjustments for the face plate.
Compatible with enclosure as it acts as both camera holder and panel holder. To mount it, I used an M5X20 screw with an attached nut to make it like an M5X18.
Optimize your setup with the HomePod Mini TV/Monitor Mount, a sleek, easy-to-install 3D-printable holder designed to securely attach to the back of your TV or monitor. This mount allows you to keep your Apple HomePod Mini close by without…
Slide this cable management bracket onto your desk and tuck all your cables up under the desk, or along the back of the brackets. Desk can't have a lip or non-uniform top surface as the clip slides onto the edge of the top surface of the…
Print in PLA, 0,2mm, no support. You need 4 screws and nut, M3x8 or M3x6.
A wall mount for a Panasonic EY0L11 charger that, for some reason, isn't wall mountable as standard. The mount is split into two files for easier printing, a baseplate and the clamping band that goes over the battery charger. No supports…
Another version of Servo Mount for Lego Train Switch. The others simple do not suit me well. All parts are printable, you will only need SG90 9g micro servo with a small screw (usually part of servo) and sure, the original lego switch…
This is a tool board protective base with a fan mount for cooling the Orbitool tool board mounted to a Orbiter2 extruder. I remixed it to support a 4010 fan and the umbilical cable. Printed in ASA 5 walls, bottom and top. Orca 2.2.0 If…
Fenix HM65R helmetmount Print with PETG Can be mounted with zipties or doublesided tape
Created this for our training department so that they can organize our gopros
Made the mount specifically for my 16mm thick vernier caliper. Specially designed so that vernier caliper can't fall out. Dont hesitate to ask me for other file formats like (obj, 3mf, etc…)
4x m3x8mm (or 6mm) screws are used. The screws go directly into the plastic (modelled as 2.9mm holes). FreeCAD and Step files are available if anyone wants to modify it, e.g. add heat-set inserts. Stand consists of two feet, so print file…
I've been using good old nails to organize torque wrenches on my barn's wall, but when I got this torque screwdriver things started to get fancier.
I downloaded some bracket model long time ago and used it as a source for this one, but I can't find the original link. If you see that it's based on your creation – please let me know, I'll add the link. One screw seems to be enough to…
Great Models, just the Bed Cable Base Mount did not fit 100% on my Ender 3 V3 KE, so i tweaked it a little: - small cut out for the hole on the inside - model is 1mm longer and removed chamfer on the bottom - small clamp on the top
Each light bar has its own mount and hang on a M8 screw. I found and printed the correct screws for my Vesa with this set: https://www.printables.com/model/653654-screw-set-m3-m4-m5-m6-m7-m8-m10-iso-4017
I made an Alexa Echo Dot 3rd generation wall mount. No Supports needed
my original antenna broke and I couldn't find one as long, so I created a holder that is in front and any antenna can be PLA/PTG/TPU 20-100% no supports
The top backrest mount of my chair broke, I think the design is flawed. This part replaces the original mount and moves the backrest a little further back so that it rests on the “spine”. Print with 100% infil, doesn't really matter what…
The mounting brackets have 5mm holes for screws. The tenda switch has the following dimensions: - Width: 101 mm - Length: 100 mm - Height: 26,5 mm Happy printing and mounting :)
I wanted to use Noctua's 5V PWM fans with my LDO Leviathan board, and in order to save space on the DIN rails, I wanted to use the Wago mount designed by Dr-Info. However, the mount only holds 2x Wago 221-413 terminals whereas I needed a…
Modern toilet roll holder with hidden base. Print in PLA or PETG Print Settings Arm - 50% infill - 0.2mm Mounting Plate - 100% infill - make this part solid Base - 20% infil, 0.2mm, I did set the my perimeter setting from 2 → 5 to make…
Testing. Gopro mount for saddle rail. 7mm round and 7x9mm oval rail. I modeled this to mount CO2 cartridge under the saddle. 1x M3 OD5mm heat insert 1x M3 bolt 10~12mm 1x M5 bolt 16~18mm 1x M5 nut
This is a magnetic mount to allow easy repositioning of a Ring Indoor camera, uses two 8 x 25 x 2mm magnets. I've included a Fusion 360 file so if you want different magnets it is easy to do, if the new magnets are rectangular just change…
A replacement for mounting SSD drives in PC cases. It can hold up to 5 SSD drives. The design also includes holes for at
