Counting matching models…
Pencil case for your drawing/writing utensils. You will need to glue the graphite, wood, pencil and metal parts together except for the eraser that you can screw on. I also put a piece of foam in the pencil and eraser to protect the point…
A two part case to keep your one up steerer tube threading tool kit organized.
Need an easy to obtain case for your Google Coral Board, then use this.
Magnetic Case for Synaptics Coralboard SL A compact magnetic enclosure designed for the Synaptics Coralboard SL development board. The enclosure provides quick access to the board while maintaining access to essential development…
Just the bolts not the actual box for the camera.
Removed usb bridge for more flexibility with controller header. Compatible with https://github.com/friction07/corne-xiao
A two part case to keep your one up steerer tube threading tool kit organized.
ok guys I'll try to make this as simple as possible. the case i used was the axigear 16x13x6 from amazon(i chose this for it's mostly flat design). d-ring tie down anchors, and askuko 56 inch shoulder strap(other straps would not fit the…
FR Avec une laser CO² on utilise souvent des contrôleurs Ruida. Vous trouverez ici 2 modèles, un à poser et à fixer avec du scotch double face, l'autre sur un axe ventouse et tête magnétique. https://amzn.to/4ejhZuS Les 2 boitiers…
RU: Версия для другого экрана Отличия: кнопки сделаны вертикально, не сделана подставка. Важно - в файлах версия для использования вплавляемых гаек. Из-за странного, на мой взгляд, расстояния между осями крепления - предлагаю сначала…
Modified the original design to fit a 5V 30AMP relay. I have modified the dimentions to fit a 5V 30Amp relay that I had to use in a project.. Amazon link (no affiliation) - https://www.amazon.com/gp/product/B07DSZFLMQ Relay Dimentions:…
A small and extremely portable Pinecil case that suits my needs. Has space for: 1 Pinecil soldering iron 7 Soldering iron tips 1 Solder spool 1 608 bearing hot iron stand Most heat set insert tips. Iron stand assembly: insert a 608…
display mount that fits on to your laptop display. can be adjusted for sizing for your display as well as your laptop.
This is a case for the Spirograph . All parts fit in 3 layers: Bottom: 155, 63, 40, and 36 Middle: 144 and 80 Top: Everything else
Molded part for Japanese precision cutting tray Printed with recycled PLA filament (rPLA) from the “Recylcing Factory”. Use glue as the corners tend to bend upwards. Formeinsatz für die japanische Präzisionsschneidlade von Dictum. Mit…
After having the scroll wheel break on my Logitech Anywhere MX mouse while it was in it's soft case in my backpack, I set out to make this hard case so I can throw it in my bag and not worry! My first step was to use my school's 3d…
A minimal open-frame case for Micro-ATX motherboards. Designed to serve as the base for hardware testing rigs as seen here: It should be compatible with any Micro-ATX motherboard and SFX PSU. The ones in the photo are: Gigabyte B760M DS3H…
The case requires 4 x M3x12mm screws. During the installation, you will need to flex the top shelf quite a bit to make the MiSTER fit, so make sure filaments that are not overly brittle. I've personally printed the case in ASA.
Introduction The case is made up of two parts. It fits very tightly and holds the connection cable in place, so you don't have to worry about damaging the data cable. It also makes handling the Bartels micropumps easier. There is a stand…
plus facile à démonter eTPU 95A Print in flex filament
Double WaveShare 7.5" e-Paper case - symmetrical borders I am using my " WaveShare 7.5" e-Paper case - symmetrical borders " for 2 years in several projects now, but some of them just would look better in my eyes if they were in 1 display…
About the model: This is a prototype case for OneBlade 360 Face PRO electric shaver and Hismile Electric Toothbrush, and is therefore a work in progress and not complete yet. I struggled to find dimensions online for these products,…
This is my first design ever. It is ment to let the magnetic USB-C inside. A normal USB-C cable also fits the opening in the bottom I Also added a space for a M5 washer so you can attach it to the magnetic Phone holder in your car. Mein…
Motorola TPG 2200 Case with a place for adding a metal clip (https://www.amazon.de/dp/B07KLJK62B) with a M4x5mm Screw Hexagon Socket and a M4 Nut. UPDATE V2: The back for clip is now open on the bottom.
.308 Ammunition Case This is a 3D-printed case I designed to hold 20 rounds of .308 ammunition. The silhouettes are extruded up just past the halfway point of the round giving it a secure hold and a satisfying 'click' when pressing in a…
Made this stand to display some of my special edition switch games in boxes. You need to print two of the a-frames.
Case for LilyGo Ts-4.7 Inch S3 E-paper board. Facilitating 18650 battery (with a separate holder) Board button access USB connector access
Ever wanted your iPod mini to be USB-C? Fret not! This case lets you do that without modifying the iPod in any way. You just need an old 30 pin cable and a USB-C female port (like this one for example:…
The case is for jufy111's 18650 holder. Here's the link: https://www.printables.com/model/999328-18650-battery-holder-case/files I designed it with snap off supports so that it can be printed diagonally for most stability. I do recommend…
Remix of @wizzo TapTo case to fit the smaller module available on sites like AliExpress
A minimalistic cover that protects your analog sticks. It goes over the track pad and, using a nub, snaps in place over the headphone jack. See Gif for usage. Works well for my use case of tossing the controller into my backpack. Use at…
Just a small case for the Case for Hailege USB zu RS485 TTL Serial Converter Adapter FT232RL 75176 https://www.amazon.de/dp/B07Z1V5WQS
Not exactly a remix, more an addon. This is a case for jimylongs' excellent Locksport Model. Houses the model and the extra driver pins, and contains space for up to three spare springs. Model can be operated in place (movement limited to…
I got it to print on my stock Ender 3 Pro in PLA without supports, so the vast majority of printers should do the job just fine. How to assemble: Put your 2.5 inch drive into the case, Slide Holder 1 and Holder 2 into slits in the case to…
I have designed a custom enclosure for the WZ3605E module. The enclosure offers two power input options on the back: a DC 5.5x2.5mm jack or a USB Type-C port. The USB Type-C power delivery is managed by the PDC004 trigger module, ensuring…
This is a simple case designed for an ESP8266 IR transmitter and receiver circuit (ESP_IR_TR_WIFI) that I bought from AliExpress. I designed the case to accept M3x5x4 threaded heat inserts and M3x10 countersunk screws. The USB is only for…
Coque pour Pixel 8 Pro avec clapet de protection des lentilles photo. Cette coque permet l'ajout d'une baque Magsafe. Coque imprimée en TPU, le clapet a été imprimé en ASA mais il peut l'être en PETG ou ABS. L'articulation du clapet est…
It's a simple case for the Flipper Zero 3-in-1 Expansion Board Parts needed to build one 4x M3x10mm Screws
Ever wanted to use your uConsole while lazing around? I did. I bought the uConsole to develop small games and demos while lazing in bed after the kids were asleep. I promptly started dropping it on my face alot. This is version 3,…
Case for magnetic sunglasses from owndays snap series, with elastic band slot, fits over a sony xperia 10 iv wallet, Requires: 4 * m2x16 bolt 4 * m2 nuts felt/soft material to line case 150mm * 20mm elastic loop (I used 300 mm * 20mm and…
I thought @t4obrien's case needed a little extra on the front so I added some grooves to break the surface a bit. For all other files please go to the original model and download from there.
The "Letter Marble Run" is designed to aid in the formation of uppercase letters. It consists of hexagonal building blocks that, when assembled correctly, create a letter shape. Students can trace the letter with their fingers or guide a…
The "Uppercase and Lowercase Letter Matching Puzzle" consists of 3D-printed puzzle pieces with raised letters, making them both visually and tactilely engaging. It is recommended to print the letters in a different color for clearer…
The hardest work was done by db , and he deserves a ton of thanks for publishing the step files for his case. The original model had a bit of a poor fit on the ports of the pi. I used the step files of the board provided by BigTreeTech to…
contact lends container 5x3=15set and 1set
I have .3mf files with my settings I've used over at Makerworld . To split the model into each individual object: (In slicer) Right-click model → split → to object Designed for a full size ATX PSU and a dual PCIe bracket GPU GPU size…
A simple little coin case for Japanese Yen with a pumpkin design. If you're using a Multicolor Printer, just print the AMS Lid and Body, but if you're using a single extruder printer, print everything other than the AMS Lid. It may fit…
I wanted a horizontal mount for the SKR Mini E3 V2 to act as a secondary MCU for Tronxy X5SA Pro build. It needed to be in the front right side so it could be hooked to a display. Printed in PLA using Voron print specifications. Supports…
Separating trays for reloading brass, pulls out 45, 40, 9mm, and I added the separate 380 version. You want to stack them as they are labeled as follows, from the top down: - 45, 40, 380, 9mm, and base. The trays stack, just pour in the…
Simple case for 2x Uwell Caliburn X Pod. Glue 6x2mm magnets into the holes. If the pods are little bit loose in the case, you can simply add some layers of transparent tape to both parts of case.
Round case that screws on. I thought of it for a soap bar to carry everyday and the holes are made to dry and keep it cleaner, following a Voronoi pattern.
PRINT SETTINGS: Recommended material is : Abs / Pla Layer max : 0,2mm Minimal scale : 100% Support : NO Fill density : 5% Fill pattern: Grid Perimeters : 3
Bottom case for the DROK 200407 12V to 5V DC USB Buck Converter Dual USB Port Fast Charger Board with an integrated Synta/Vixen-style finder dovetail for mounting on a telescope. Reuse the hardware and top case that came with the product.…
hit the like button if you downloaded it, so i can get the prusa meter , thanks The Dummy 13 use 2 x 4 grid of Gridfinity If you already had box 2 x 4, then you can only use the dummy shape and glue it to your existing box.
Remix for woodprop's mobula 7 case from thingyverse (https://tinyurl.com/2pue85ds), used 5x3mm magnets and filament piece for hinge. used velcro to attach batteries to top of the case.
There is an update version of this model: Flat-Edged AirPods Pro (2) Case 2.0 Printable case for Apple AirPods Pro with flat edges. I've designed two versions, one for the AirPods Pro and one AirPods Pro 2 case. Their dimensions are…
Modeled in Tinkercad Sliced in Prusa Slicer 0.4mm nozzle SPEED profile PETG
Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro video HERE and the teardown video HERE . ***ASSEMBLY VIDEO NOW LIVE CLICK…
Untested! The design is based on careful measurements (made by hand, not scanned) and has been double checked, but I don't have the means to print it to test it myself. If you print it please upload a make and give feedback. This should…
Deutsch: Kleines Gehäuse um ein Shelly mini gen 3 als schaltbare Kabelverlängerung zu nutzen. Vorsicht Hochspannung, 230 V = Lebensgefahr! English: Small case to use a shelly mini gen 3 as a switchable cable extension. Caution, 230 V =…
The full instructions on creating a hidden AI camera with Raspberry Pi: Find 3D-Printed RC cars here.
Description This is a remix of two models - both of which have been modified. Model one is the 3D printable case for the OpenMV Cam RT1062 V4; model two is the Bendy Phone Tripod and Stabilizer. The result is a cam case with an embedded,…
This is a simple single piece case for an LM2596 DC - DC buck converter. There are several versions of this module but this case is specifically for the version pictured below. It has two mounting holes, a voltage adjustment…
Bold lines and sharp edges define this 3D-printed lighter case, inspired by the energy of the techno scene. With a futuristic, industrial feel, this lightweight, fast-to-print case is perfect for those looking to make a statement. This…
This is a Raspberry Pi Camera Case Holder for Prusa IKEA Lack Enclosure. It's a very sturdy permanent solution for the Lack Enclosure, adjustable in 2 directions (up-down) and (left-right). Fast and very useful print!
This is a longer Version from Josillos Arduino Nano USB Type C mini box This Version is about 2cm longer than the original, to add a small sensor or a few centimeters of extra cable. No glue required. Cover snaps in the box
Designed using the Parametric Rugged Box by Whity (https://www.printables.com/model/258431-rugged-box-parametric/comment) with specific fitment for the Canon Selphy 1500. No supports needed. Recommend extra walls and higher infill for…
A two part carrying case designed to be able to carry the Novolizer style inhaler without the button constantly being inadvertently actuated. Created with the help of a 3D-scan of the inhaler to enable a good fit in the case. Printed on a…
The Dyson Brush Case is a convenient way to store your Dyson brush. The case allows you to lock the brush in place, keeping it secure and preventing it from moving around. It also protects against deformation, so your brush maintains its…
Samsung galaxy a13 case with attachments clip. i currently have only one attachment made wich is a 2 card holder but there will be lots more coming soon
Changed magnet size to 8x3 because that's what I had.
It's a remix of two great models into one even better Print vertically and use brim for better adhesion. For a better look, draw a seam inside the model in Orca slicer. I prited mine in PLA.
A gridfinity holder for storing multiple Raspberry Pi in armour cases. Also has slots for two Raspberry Pi Pico. I've included the original Fusion 360 model. Could be tweaked so that you can also store microSD cards as well. Printed in…
Gridfinity holder for Raspberry Pi 5 in Official Case. Printed in PLA.
Hi everyone! 😊 Due to popular demand, I decided to design my own enclosure for the Bigtreetech TFT 35 V3.0 display. This box supports the standard display emulation included with the printer and can switch to touch screen mode. I’ll be…
This is a complete case for the Wantmoore.tech LEDeez v2.0 pixel controller. The lid is a friction fit design. It's relatively thin - so should print with “all walls/top shell/bottom shell" and be plenty strong. .2mm layer height 4 wall…
I needed a small case to carry my earplugs so I designed this box. But it can be used to store all kinds of small items that need protection. It requires 2 cylindrical magnets with a diameter of 3mm and a height of 2mm. It is a print in…
This is slim compact case for a ST7789 I2C 1.54" TFT Display Screen. The case was designed based on the measurements of this model I ordered from AliExpress. As with the other slim cases I've created the model's clearances are very tight…
These are the 3d models to make an under desk mount for the NCASE M2. All parts besides the “Bump Pad” were printed in ASA, but other materials should also work. The “Bump Pad” was printed in TPU as it is softer. The screws used on the…
This is another new version of my glasses case. See also the previous model https://www.thingiverse.com/thing:5751006 . I noticed that the previous model kept tipping over when you opened the lid. I was also in the mood for a new design.…
Keeps an AirPods Pro case closed so that the buds don't go flying any time you drop it. Can be easily opened with one hand. Don't mind the terrible layer lines in the photos, I didn't realize my printer was that badly set up!
A case for the MEAN WELL QP-200-3A arcade power supply with voltmeters for +5v and +3.3v rails, and mounts for potentiometers to adjust the voltages (mod required to the PSU to wire those in). AC power is provided through a switched port…
This puts the GPIO card under the wifi card, so the pins are low and at the back of the machine and easily accessible. The GPIO cable passes through the slot for the bed cables. MMU text included for Wifi and GPIO symbol. Uses 4 m3x10 (or…
Altura de capa recomendada: 0.2mm o 0.16mm 3 perimetros o relleno del 100%
Link to Github: https://github.com/b3nn0/stratux/releases/ Part List: Power supply module: LM2596 DC-DC Power supply connector: XT60E Raspberry Pi 3B or 3B+ 2x DC Fan 40x40 mm 2x NESDR Nano 2 6x Threaded Inserts (short) - M3
Needs at least 300 x 300 build plate. Printed Case in PETG and insert in LW PLA
Just added a DIN Rail mount to the middle part for industrial mounting also made some printability improvements Category: Electronics
Print upright, use support at the bottom and (probably) for the hole on the right side of the case, 3 wall lines, use TPU. I hope you like the model.
Printed using PETG, but any material should be fine. You'll need a little bit of flex to get the latch onto the corresponding pins of the hinge. On the hinge, enable “Supports on build plate only”. On the latch, I used paint-on supports…
Clone of the original divider for large ToughCase (DT70804, DT70839)
Testprinted in ASA, should work with pretty much all other materials. If you have multi material capabilities available, see the screenshot on which region to print in white (or translucent) to let the LED shine though.
A modern case with four compartments for pills and various things. For the closing mechanism 10 neodymium magnets are needed 5x3mm (diameter x height). The magnets are pressed into the holes. For the magnets in the lid, make sure the…
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box contains an optogate . These boxes fit the inlay of my Peli 1560 that I will share in the next days. For the hinges use M3x25 mm…
