Configurable USB drive case
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.52 – €0.64 net (excluding VAT)
For file: usb_drive_case_0.15mm_PLA_MINI_39m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.58 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 38.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A configurable openSCAD model with a snap-in cover, and optional text label. Probably over engineered a bit.
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 381
- Makes
- 3
- Views
- 1,754
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
I had an old USB drive around with a broken mechanism in the case so I decided to print a new one.
The openSCAD model is very configurable, so you can configure this for your USB drive, or whatever else.
One possible improvement I would like to see is rounded edges for both parts, but from what I've seen it's unnecessarily complex to do that in openSCAD.
You can also find this model in my git repo.
Print settings
I printed this with a Prusa MINI+, using PrusaSlicer 2.3.
Slicer profile: Prusament PLA, 0.15mm QUALITY.
NOTE: I recommend generating both the case and the cover into one STL, and using the “Split to object” function in PrusaSlicer.