Raspberry Pi 5 Case - Modular Snap Together
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.34 – €2.86 net (excluding VAT)
For file: Raspberry_Pi_5_Modular_Full_Case_without_Active_Cooler_0.4n_0.2mm_PLA_MINIIS_2h3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.60 excluding VAT (range midpoint).
- Weight reported by the author
- 44 g
- Print time reported by the author
- 2.05 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Modular Raspberry Pi 5 case with ventilation and many port configs – fits with or without the active cooler.
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 612
- Makes
- 6
- Views
- 2,757
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Rasperry Pi 5 Case - Modular Snap Together
This is a remix of the excellent "Modular Snap Together Raspberry Pi Case" by Sneaks, originally designed for the Raspberry Pi 3B+ and Raspberry Pi 4.
I've updated the design to make it fully compatible with the Raspberry Pi 5 and its new Active Cooler.
Additionally, I added improved ventilation and created a variety of modular components for flexible configuration.
🔧 What's New:
Updated internal dimensions for Raspberry Pi 5
Added ventilation cutouts for use with the official Active Cooler
Created multiple interchangeable modules for different port and cooling configurations
🧩 Module Options:
➤ Without Active Cooler:
- Blank
- 2x Camera/Display
- 1x PCIe
- 2x Camera/Display + 1x PCIe
- Only GPIO
- GPIO + 2x Camera/Display
- GPIO + 1x PCIe
- GPIO + 2x Camera/Display + 1x PCIe
➤ With Active Cooler:
With open vent:
- Blank
- 2x Camera/Display
- 1x PCIe
- 2x Camera/Display + 1x PCIe
- Only GPIO
- GPIO + 2x Camera/Display
- GPIO + 1x PCIe
- GPIO + 2x Camera/Display + 1x PCIe
With hexagonal vent:
- Blank
- 2x Camera/Display
- 1x PCIe
- 2x Camera/Display + 1x PCIe
- Only GPIO
- GPIO + 2x Camera/Display
- GPIO + 1x PCIe
- GPIO + 2x Camera/Display + 1x PCIe
📁 All files are labeled with the corresponding module configuration to make selection easier.
🖨 Print Settings (Recommended):
- Material: PLA / PETG / ABS (depending on use case)
- Wall Line Count: 2
- Top/Bottom Layers: 2
- Infill: 25%
- Supports: Usually not needed