1 / 2
16x2 LCD with D1-Mini case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple case for a 16x2 LCD with a pocket for a D1-Mini in the back.
- Rating
- 0 / 5
- Likes
- 33
- Downloads
- 364
- Makes
- 0
- Views
- 1,686
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a simple case for a 16x2 LCD with a pocket for a D1-Mini in the back. It has a cutout for the controllers metal-can to prevent overheating.
Assembly
- M2 machine-screws inserted from the front side should self-tap into the posts in the back. If this does not work use longer screws, a washer and a nut on the backside.
- When soldering wires to the controller, you should keep them flat on the back.
Changes
v1 → v2:
- Pockets for screws on the front
- Better pocket for the controller