Raspberry Pi Touch Display 2 Case
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.70 – €6.97 net (excluding VAT)
For file: Raspberry Pi Touch Display 2 Case 50mm Square M3 Heat Set_0.4n_0.25mm_PLA_MK4S_3h20m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.34 excluding VAT (range midpoint).
- Weight reported by the author
- 142 g
- Print time reported by the author
- 3.33 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A case for the 7" Raspberry Pi Touch Display 2 and a Raspberry Pi, 1 part with minimal supports.
- Rating
- 4.5 / 5
- Likes
- 41
- Downloads
- 909
- Makes
- 2
- Views
- 6,572
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
A nice case for your 7" Raspberry Pi Touch Display 2 (https://www.raspberrypi.com/products/touch-display-2/ ) and a Raspberry Pi. Features easy access to the USB and Ethernet ports.
Designed to use the M2.5 x 6mm screws included with the display to secure it into the case, though M2.5 x 8mm screws are a bit easier to use. The countersink is make large enough to allow most screw drivers to fit as well as a washer to give extra support.
I have provided the case with a number of mounting options including VESA 75 and 100, and a 50mm x 50mm pattern with M3 and M4, as well as one without mounting holes. All of the mounting variants have a model for heat set inserts and for directly tapping the plastic.
The only part that needs supports is the top of the cable channel, organic supports are recommended. I do not recommend supports for the mounting holes or the hexagonal vent. The 3mf file is configured for the MK4s and has the supports generated.
Requires a right angle adapter for the USB-C power connection to the Pi (Or a Micro USB adapter for older Pis).
https://www.amazon.com/dp/B0D327SP5F?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
UPDATE: Based on feedback I have a second version of all the configurations with more space around the glass front of the screen in case you have fitment issues.