Counting matching models…
This stand holds an electronic screen at any convenient angle. It is sturdy, easy to assemble and print, and folds up for storage. Small sizes can fit in your pocket, and the largest size can hold a tablet. It can also accomodate…
The left cap of the Celexon projector screen tends to break. I made a sturdier version. It's possible to use it without the metal-angle-insert, but it's more stable with it. Important info: The gap is very narrow, so please insert it…
This is a mounting bracket for the Bigscreen Beyond Link Box . It's designed to (gently!) smush the link box against whatever surface you're screwing to, so don't tighten down too much! Hardware 4x 3x12mm countersunk screws Suggested…
I made some modifications to the screen holder from this project https://www.printables.com/model/862834-guppy-screen-display-holder-for-creality-ender-3-v to allow access to the USB port.
Decorative windscreen-mounted holders for tax and insurance discs. I got tired of the terrible ugly standard vinyl holders, so made something a little nicer. These accommodate the standard (Ireland/UK) tax disc which is 75mm round, and…
This is slim compact case for a ST7789 I2C 1.54" TFT Display Screen. The case was designed based on the measurements of this model I ordered from AliExpress. As with the other slim cases I've created the model's clearances are very tight…
Screen Housing Model for Anycubic Kobra 2 Neo 3D Printer with Integrated OrangePi Zero 2W Board
This is an extrusion frame mount for the Chitu 5 (v5) touchscreen (RXA-050001 model). This features 5mm mount points for your convenience. The face plate and the board half mate with each other, eliminating the need for glue. Screen:…
Love my Voxelab Aquila printer but I dont like how the screen hangs off to the right! So, I designed a Screen Tuck Mod to get the display closer to the printer. Much better! If you like what I do, buy me a coffee from the link below. :)…
Store your 58mm puck screens with this magnetic holder. Uses 10mm x 3mm magnets ato hold on to your coffee machine.
Box GridFinity 2x3 for X-Rite Calibrite Display Pro (Color Checker) Base 2x3 Box 6 U created with gridfinity generator (https://gridfinity.perplexinglabs.com/pr/gridfinity-extended/0/0)
Guarding touchscreen from toddlers that like to push buttons on screen :) Slides from top to bottom and vice versa. Use both hands to do it straight. Print verticaly. I've used 0.6w walls and 0.2 layer height.
I have an enclosure for my 3D printer Elegoo Neptune 4, so my screen is inside all the time, and it is a bit difficult to use. I designed a screen holder for the included touchscreen for the Elegoo Neptune 4, also it can hold a basic…
This is a custom screen enclosure for the ELECROW Raspberry Pi Touchscreen 5" monitor (amazon non-affiliate link below). I have this monitor mounted in a Lian Li case - which did require cutting a hole in the mesh part of the case.…
This is my version of the UTIL/Desert Patrol chest piece's little readout screen as seen in Halo Infinite. Using my own scaled chest-piece as reference, it's roughly the right size. Category: Costume
I needed a simple stand for an additional Home Assistant Raspberry Pi kiosk I am adding to my home – so I whipped this up. You’ll need some 2.5mm screws for assembly (I used socket head cap screws). Add some rubber stick-on pads to keep…
Default Bambu Studio Settings, No Support Either Version Works Great
Maturity: Very Good. 9 prototypes. In use since 2024/03. Hardware: 2x M4x16 ISO7380 to fix the screen case on the mount 2x M6x16 to screw the mount on the aluminium profile (M5 if you have M5 nuts) 2x M6 rail nuts Log: 2024/03 Initial…
Bastion mods: -btt octopus mount with and without mosfet mount -cables and ptfe (M6 coupler) relief -PSU cover with and without charger mount (for Rpi) -5 inch screen mount -Rpi3 mount -bastion logo diffuser for dragonburner I also…
Upgrade my ender 3 to base Boron and Klipper and the screen in the botton was not helpful when put the enclosure
Hitster phone cover To cover the song info when playing HITSTER with a free spotify account Based on my S20FE with phone cover. For use with other phones with or without cover; scale the model such that the inside of the case is e.g.…
So this is an evolution of my 1x1 GR model that just held the display, as I wanted to have a double-sized unit as a temperature and humidity sensor. This uses my ribbed casing design, that has 2 heights at which panels can be slotted in.…
Imagine you have a magnetic holder for your cell-phone in your car. Normally these use a thin ferromagnetic plate, which should be glued to the backside of your phone. But what should you do, if your phone supports inductive charging,…
I printed this in PLA with 3 walls and 15% infill.
If you make a large bugscreen, for a door, for example, you need some kind of reinforcement about the middle of it. There are no commercially available middle elements so you cannot connect the middle bar. I made this insert and you can…
The door latch plates in most RV screen door kits don't offer much of a detent to actually hold the door shut. This has led to a few incidents with my dogs jumping up against the door and popping it open. This new latch design has a much…
Windscreen wiper nut cover for Mitsubishi Pajero Gen 2 (V24). Printed with TPU.
sleeve to enclose the DKS remote and a simple clip to clip it to a sunscreen or other convenient location. solidworks file included for future improvement. print with PC or ABS because the inside of a car gets real hot. pla gonna melt.
i wasn't satisfied with the small touchscreen available and went for a hunt on aliexpress and found this little gem. Only drawback is the somewhat huge bezel, i tried to keep the bezel as minimal as possible to not further increase the…
If you're here for a Valve Face Tracker Mounting solution that's nice and sturdy you've come to the right place! Just download the Frunk replacement, swap it for the current one, and then you're good! However if you wish to assemble your…
Hello, this a Creality screen cover to block light. It has a hole slot for the percentage to show through. It works with both Profesional and Stock frimware. DISCLAIMER: I know it works with my Ender 3 v2 Neo, but I am unsure about using…
It covers your screen to protect it from dust. Printed with 15% infill and Hilbert Curve for the top layer to give it a nice finish.
Tired of aimless urinal time? Give your stream a goal that truly inspires relief with our Patriotic Potty Splash Screens—featuring the faces you love to loathe. Micturate with purpose. 💥 Marjorie Taylor Greene 💥 Lauren Boebert 💥 Karoline…
Voron V0.2 Fridge Door / Colony Clacker Stealth Skirts 2.8" Waveshare screen as the tittle suggests, you are now out of breath reading it… lol but this is the Stealth Skirts option if you want to fit the Waveshare 2.8 inch screen to your…
🇬🇧 English This holder allows the Benq Screenbar to be used on a monitor mount with two screens. The clamping ring with a diameter of 35 mm can be mounted on the bracket shaft of the monitor mount, while the three coupling rods with a…
This is a pivotable and adjustable top-front 4.3" screen mount for the Gaggiuino mod on a Gaggia Classic and Gaggia Classic Pro. This mount uses the Loogle “official” Gaggiuino screen housing…
If you’ve installed a tall windscreen on your 450MT/IBEX and want to prevent any play in the windscreen adjustment mechanism — and your motorcycle is equipped with a 22mm navigation mount — I have a solution for you. Attached is a model…
A DM screen with a built in player facing LCD, for showing off artwork, initiative tracker, or whatever else you want to show your players. I have even used it to show the webcam feed of a player that had to join through Discord. **Front…
🧩 Features: Compatibility : Designed specifically for Bigscreen Beyond and the Apple Vision Pro’s Solo Knit Band Tool-free installation : Snaps into place without glue or modification Lightweight & durable : Balanced for strength while…
Screen cover with a tapered handle. Fits almost perfect on my screen. Printed in .28 draft with Flashforge Galaxy Matte Black.
As per title this is a recreation of Pionaeer SPH-EVO62DAB screen bracket but made slightly thicker to make up for being plastic. It'd be ideal to use M4x6 screws instead of the provided M4x5 (it's now 2.5mm thick instead of 1mm thick).…
I recently picked up a Sovol Zero for some high speed printing and was disappointed in the stock screen / knob interface, as well as the Factory Sovol 5 inch screen upgrade (which works perfectly, but just looks weird being so large on…
This screen mount is designed for the Elegoo Neptune 3 and 4 series. It attaches securely to the side of the printer without any screws, providing a hassle-free installation. Two versions are available: the lower model and the upper…
This case is designed to fit the mini version of Matt's USB 2.0 hub found on the Bigscreen Beyond Discord. It is meant to attach to the soft strap and will fit both the BSB1 and BSB2. Recommended Print Settings: Print in as oriented in…
Updated to have no bottom in the screen protector. This accomplishes two things. First and foremost the new style LCD fits. Other than that it makes it easier to keep neat and tidy without having tiny bits of filament caught in the tray…
Remove the accent bit on the left side of the printer, reuse the two screws to attach the housing. Oh, put the housing on BEFORE mounting the screen, or you'll be doing it twice :D I was able to fit it on my Zero, barely. Have to print it…
I have no idea why on UPS that work 24/7 manufacturers still doing bright displays that are not turning off after some time. The LCD on PowerShield Defender 600 is very bright during nights so I modelled a simple cover for the screen and…
it fits in the cd sloth, i made the mount so it fits the 10.26 screen from alixpress this is the first version, am gonna make a stronger version stronger version now out. but think i will make even a stronger one cause am not 100% okay…
I didn't like the angle of the lcd screen on my Sovol SV08, so I modeled this bracket to change the screen angle. Updates Update 1: I included another version that should work okay with the enclosure lid. Update 2: Added a new model that…
ENGLISH : Creating a screen cover for my CPAP machine Löwenstein WM 090 TD, leaving the power button accessible. The support is clipped at the level of the carrying handle. I created a support with and without hook to hold the mask. You…
I wanted the Link Box on the front of my 19" Rack Case. Should fit any 5.25" Slot. Not sure about the mounting hole location. Your mileage may vary there. It's designed for M3 screws and Heatset inserts. The Big 30mm hole is for an USB…
swiveling base and holder for a galaxy a70 for use as a klipperscreen clamps the phone in place and has both short arm or long arm options, bolts on 4040 extrusion on the side of your printer 6 m3 inserts, 2 m4 inserts, and 4 T nuts are…
This part allows the screen to be mounted straight up next to the printer, this is most usefull for when you have the printer on a higher platform and want to see the screen from below. The datacable for the screen can just reach it. The…
The original water tank cover was not suiting my needs after I started storing my blind shaker on my grinder, I had printed up the puck screen holder and had it sitting up there but thought I may be able to make everything more solid.…
Just print one of each. Fits this screen: https://www.amazon.se/dp/B0D1C4XLNY?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 with a raspberry pi 4 mounted to the back. You need four m2.5x25 screws to mount the screen to the bracket. Stack the…
This is a Holder for the NetAlly NXT 2000 Spectrum Analyser that sits on a MAC M2 Laptop screen. Designed so you don't break the USB connector when using the NXT2000 with Mac Version of WiFi Explorer Pro. Will print without supports. .2mm…
This is a remake of the MattHub mount for the Bigscreen Beyond audio strap. The mount backplate is nearly identical to the one bundled with the hub, but my remake features 1.85mm holes instead of 2mm for a stronger fit with undersized…
New look for ECC touch screen. Printed in PETG, layer 0.16 and no support. Printed in the position as it is in the file.
I found it difficult to pull down the door as the handle was flush with the frame. So i extended it by another 3mm. Also i extended the back blocker to the full length of the handle in effort to keep it somewhat straight. I printed this…
Full video is on my YouTube Channel : https://www.youtube.com/@SmartHomeCircle
What can you expect in Detail? A variable width game controller from 50cm to 60cm adjustable. Nudge/Tilt with accelerometer gyroscope, adjustable on the screen. Variable Flipper Buttons position, for ergonomic handling. Touchscreen Menu…
This is a blank cover for the screen of the Cr10S Pro V2. To install it, the screen has to be removed. You can reuse the original screws. I created this as I wasn't happy with the existing options of using the screen together with…
About this Case for the Heltec Touchscreen This case is easy to assemble , and wraps your Heltec v4 WiFi LoRa 32 Expansion Kit (touchscreen) inside a protective enclosure that provides easy access to the power and 35 buttons (wakeup…
Introduction Quite a few people keep their Snapmaker U1 close to the floor which makes the touchscreen a bit harder to see and use. This mount allows tilting the touchscreen upwards for better visibility and usability. This is not an…
Added a mount bracket with camera clamp adapter. stevenson_large_mount_glue – smaller ring and smaller holes. Use 1.75 mm filament and some acetone or super glue to bond the parts together. stevenson_large_mount_screw – larger ring and…
Replacement of: 5453258-070 KEEP IN MIND , that the model is quite big and you have to have the bed size at least 305 mm in one axis. I recommend to use Bambu H2D (the bed of it fits two of those). Required parts: 3x M4x10 bolts, 3x M4x6…
Replacement of: 5439661-070 KEEP IN MIND, that the model is quite big and you have to have the bed size bigger than Bambu X1/P1 or Prusa Mk3/Mk4/One printers. I recommend using Bambu H2D/H2S or H2C. Material: PETG / PC-PBT / Nylon, and…
EN I designed a cover that installs over the C1's screen. You won't need to remove it; just slide the window open and you'll have access to the screen. Once installed, you can open and close the printer door without any problems. Enjoy!…
Slide in stands for the Asus ZenScreen MB16 Monitor. Modeled for and tested on MB16AC but I bet they work for MB16ACR and MB16ACM. There's 2 model on more "upright" and one more "inclined" and for each there're models that take 10mm…
BOM Model : MPI5001 (Capacitor touch) screen. https://www.lcdwiki.com/zh/5inch_HDMI_Display-D M2.5×8mm BHCS × 4 (For mounting the screen) M3×8mm SHCS × 4 M3×10mm SHCS × 2 M3×12mm SHCS × 4 M2×10mm Self-Tapping Screw × 4 M5×10mm BHCS × 2 M5…
Ninja Lux Portafilter Cradle only with a larger gap to fit Portafilter and Current installed basket. Also included a 3 slots to hold puck screens.
Windscreen demister with wider vent opening allowing for better air flow and outlets for side window demister vents. Also includes outlets that can be used for side windows. To connect output to side windows needs 20mm ID flexible pipe.…
Description This is a custom-designed, sleek, and protective case for the popular 7-inch HDMI LCD monitors often found on AliExpress and Amazon. The case uses a "Sandwich" construction , where the screen is securely clamped between the…
this is a case for a raspberry pi 5 attached to a waveshare 5 inch capacitive touch display 800x480, if you have any suggestions please leave a comment M2.5x10mm screws
Uses existing t-nuts to secure base to 4020 rail. Two additional M5 x 12mm socket head bolts will be required. Existing M5 cap head bolts may be used to self-tap bracket holes. An IDC 10 pin extension cable and ground cable extension will…
Völund Forge – Rotary T-Shirt Screen Press Squeegee Card Holder Keep your workflow clean, efficient, and distraction-free with this purpose-built Squeegee Card Holder designed specifically for rotary screen-printing presses. Instead of…
My rower is stored outdoors on the sun, so I made this simple cover with and without supports to protect it. I added the logo later on orca.
Recent updates 2026-02-23 : Fixed mistakes in the model. Uploaded new versions of both front and rear parts. 2025-02-12: Added flat sections on the curved front face of the " FSX Focusing Screen Rear " for a purpose of attaching decals…
Intoduction I wasn’t satisfied with the 3D-printable DM screens I found online, so I decided to design my own. It’s half wood, half printed—a perfect balance between natural materials and plastic, while reducing filament usage at the same…
It is actually too loose so I put a piece of paper in some spots to hold it better... 😕 I recommend PETG. Use 100% infill at least around the pins. You will have to change Guppy Screen config file to rotate the screen.
Printed on Prusa MK4 with manual color changes. Does not require an MMU. Uses 3 battery powered votives (36mm diameter). See color change instructions are in the PDF.
the screen is 3.5 Inch IPS Type C Secondary Screen for Computer CPU GPU RAM HDD Display 320*480 USB LCD Monitor Freely AIDA64 Windows 10 11 from Aliexpress
This model is compatible with the lego system.
Warning! This project utilizes a lithium-ion battery. Anyone choosing to build this project should exercise caution , as improper handling of lithium-ion batteries can cause fires or injuries. Introduction: While the title of this project…
screen can be bought here: https://getcartablet.com/products/pro-max-1 cheaper here, but not sure if its the exact same model: https://nl.aliexpress.com/item/1005006744171534.html how to remove the airco grill: (stick the butter knife…
Design Concept The screen cover features a sleek design incorporating the Creality logo, offering a clean and professional look. Its simplicity ensures that focus remains on brand while protecting the screen. Purpose The cover is designed…
Core One Diplay xLCD Cover for Status LED Diffuser 2 different version The screen protectors I found did not allow the printer door to be opened. So I completely redesigned a protector that allows the door to be opened with the protector…
This is a custom housing I designed for the 7-inch Hosyond Raspberry Pi touchscreen. I could not find any models out there for the Hosyond screen. My goal was to replace the included wooden leg stands with a cleaner, more functional…
This is a remix of Charles Byrams dryer vent model, it was very good but I wanted to add some features I thought were important. Changes I've made: Added removable bottom mesh screen Countersunk screw holes for cleaner look Fixed a little…
Mamiya Universal Focusing Screen to babygraflok Conversion
Tired of leaving your portafilter lying on the kitchen counter or rattling around in a drawer? Then today is your lucky day if you happen to have the exact same portafilter that I do! I have: 58mm Bottomless Portafilter, Professional…
There are spots for a bed scraper, bed glue, ipa spray bottle, screen stylus, and 3 extruder nozzles. I found it best to print this with standard grid supports with a 3 layer top interface. The bed scraper slot is designed to fit this bed…
