V-Slot profile 2020 mounting bracket for 7" touchscreen case
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.97 – €3.63 net (excluding VAT)
For file: rpi4-vslot_bracket_0.2mm_PETG_MK3S_3h43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.30 excluding VAT (range midpoint).
- Weight reported by the author
- 35 g
- Print time reported by the author
- 3.71 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Alternative V-Slot profile 2020 mounting bracket for 7" touchscreen case PI3 / Pi4. Display angle adjustable.
- Rating
- 0 / 5
- Likes
- 58
- Downloads
- 311
- Makes
- 0
- Views
- 2,475
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
V-Slot profile 2020 mounting bracket for 7" Touchscreen case for Raspberry Pi 5 + slim version, 7" Touchscreen case for Raspberry Pi 4 + internal fan or 7" Touchscreen case for Raspberry Pi 3 (B/B+) + internal fan.
STL-Files for locking-washer, bracket-01 and bracket-02 see Plate mounting bracket for 7" touchscreen case.
Features
- Thread inserts
- Display angle adjustable
- Case can be rotated 180° to adjust the position of the USB ports (left or right)
Required parts
- 2x M3 Thread insert → Ruthex RX-M3x5.7
- 2x Cylindrical head screw M3 x 10 or 12mm
- 2x slot nut M5 + 2x cylindrical head screw M5 x 10mm or 2x slot nut M4 + 2x cylindrical head screw M4 x 10mm (Fastening v-slot profile)
Assembly
Print instructions
Supports: No
Pi image configuration
| Position USB Ports | Left side | Right side |
| Set in config.txt | lcd_rotate=0 | lcd_rotate=2 |