FlashForge Adventurer 5M Screen Bezel With Optional Stylus Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screen Bezel/Cover with or without stylus holder for the 5M
- Rating
- 4.933 / 5
- Likes
- 400
- Downloads
- 3,306
- Makes
- 25
- Views
- 11,478
- Reviews
- 30
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Overview
A screen bezel and a stylus holder for the FlashForge Adventurer 5m. One M3x6 or M3x5 screw is required to securely fasten the stylus holder to the cover. A bit of super glue might help as well. The bezel is a semi-loose fit for easy removal. PLA giving the loosest fit. If you want a tight fit you can give it a slight scale in your slicer, or add a piece of double sided tape.
Printing
The screen covers should be printed face down for best results. The stylus holder should be printed upright with a single support on the peg in the back. The stylus holder and cover are a tight fit, press very firmly until it is flush in place. Then secure with the screw.
Nozzle: .4
Filament: PETG | PLA
Layer Height: .2
Supports: Only on Stylus holder.
Take a look at my other Adventurer 5M Add-ons while you are here, or have a quick glance at my Spooky Prints🦇🎃🕸
Need the Stock Stylus?
Like My Work?
❤ a few of my models
or