FlashForge Adventurer 5M Screen Bezel With Optional Stylus Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screen Bezel/Cover with or without stylus holder for the 5M
- Ocena
- 4,931 / 5
- Polubienia
- 397
- Pobrania
- 3297
- Wydruki
- 24
- Wyświetlenia
- 11 442
- Oceny
- 29
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Overview
A screen bezel and a stylus holder for the FlashForge Adventurer 5m. One M3x6 or M3x5 screw is required to securely fasten the stylus holder to the cover. A bit of super glue might help as well. The bezel is a semi-loose fit for easy removal. PLA giving the loosest fit. If you want a tight fit you can give it a slight scale in your slicer, or add a piece of double sided tape.
Printing
The screen covers should be printed face down for best results. The stylus holder should be printed upright with a single support on the peg in the back. The stylus holder and cover are a tight fit, press very firmly until it is flush in place. Then secure with the screw.
Nozzle: .4
Filament: PETG | PLA
Layer Height: .2
Supports: Only on Stylus holder.
Take a look at my other Adventurer 5M Add-ons while you are here, or have a quick glance at my Spooky Prints🦇🎃🕸
Need the Stock Stylus?
Like My Work?
❤ a few of my models
or