Liczymy pasujące modele…
Since I lost the original bezel on the first day, I have designed a 3D printable replacement with different bezel styles: - Flat. The bezel is a flat surface with a sharp edge on the outer diameter - Fillet. Has a fillet on the outer…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Printable front bezel compatible with micro desktop computer models 3060, 5060, 7060. Add some colour to your dull desktop machine. In a corporate environment it is also helpful if you want to identify machines by grouping them in colour,…
I have a Dell Optiplex 7050 Micro with no faceplate and no power button. So I rebuilt it. Optimized print profiles for Bambu Lab printers available here:…
Bezel for a 16x2 LCD This design is to mount a common 16x2 LCD onto a front panel. You will need to cut a hole at least 70x20mm. The bezel is designed to cover up the hole so if your handiwork is as rough as mine, you won't see it! I…
PSI bezel to prevent the wide spread of the LED lamps in the AstroPixels lighting kit available from the URL below. This is part of the dome lighting for R2D2 or other astromechs. I printed in regular PLA, and you may need to size it up…
Updated model now available: This model is meant to be printed with PLA and fit into the bezel for the Framework 16. It is still in development and at some point, should have variations for TPU also. Note for Slider Version: The assembly…
Designed for AMS printing. Project file included for Bambu Studio.
I needed a base to mount my future DIY door lock, so I started with a replacement bezel to not break the original one. Like most of my models, this one's a fully parametric OpenSCAD model. All parameters are described in the OpenSCAD…
Yamaha Zuma (prebug 1989-2001) Ignition Bezel. I would suggest printing in the orientation shown in the last photo, to increase strength. Category: Automotive
This is a complete remake of a model I published earlier, the model I initially made had some issues, especially in the CAD file. This one was completely remade and should be easier to print and assemble, along with actually posting the…
I didn’t care much for the cigarette port on my 04 F-150, so I modified this bezel to integrate some USB ports and a reverse camera switch for my head unit instead. I wanted the ability to turn on the backup camera while in motion for…
Do you have a rectangular switch, gauge, or display you want to mount in your car, but no convenient place to mount it on the dashboard? Did you cut a hole in the plastic dash only to realize like an idiot that there was metal structure…
Part two in my series of “hyper specific prints only I will ever use”. I am restoring a banged-up Walkman WM-F35 I got. Its front window fell out at some point, and the previous owner has lost the bezel surrounding it. So I pieced…
Bezel for a vintage tv with a 5x7 opening and overall dimensions of 7x9
I tried models from other creators, but they didn't fit as I wanted, made my own.
This is a replacement front bezel for the Apple PowerBook 500 series (520/520c/540/540c). It gets under the display where the microphone is.
Blank instrument bezel, you can design a file for whatever holes you need and use it as a modifier in the slicer to customize
I have a Dell Optiplex 7050 Micro with no faceplate and no power button. So I rebuilt it. Optimized print profiles for Bambu Lab printers available here:…
Print Settings Nozzle: 0.4 mm Layer height: 0.15 mm Support: No Avoid crossing perimeters: Yes First layer speed: 10 mm/s Z-offset: −0.05 mm Bed sheet: textured (satin) recommended Notes For Casio MRW-200H . Removing or installing the…
Updated, Split top section from bottom for easier printing and slicing so you can stagger seams for a stronger end result. Also corners fit better, top screw holes my need ovaled for installation. Made a remix of the 79-86 Mustang dash…
Since I found out that it was quite easy to build a DIY Bezel Free Kit using the lenticular lens that some old monitors include inside, I've been trying to build one for my simracing rig. There are different supports out there that aren't…
These little OLED displays are super-useful. But mounting them into an enclosure means cutting a really neat rectangular hole, which I find slow & tiresome. This bezel holds the entire module on the outside of the enclosure, and fits with…
Replacement for a full front panel with a 5.25" drive cutout in ThinkCentre M series computers. Attach the bezel to the back of the front panel using M2.5 screws no longer than 4mm. Printed using PLA filament.
This is a bezel for a 1993 Haas VF0 and a LCD conversion. This gets rid of the gaps between the main panel body and the screen itself, it is not for the machines with the recessed screen. If the cutout is 9 9/16" x 11 3/4" this bezel will…
Added some bridges over the m3 nut holes to make it easier to print standing upright. Designed for .2mm layer height.
This model was originally designed for a HOSA project, and the contents of this model like the drawers or the mini items in the drawers maybe useful for anyone. Feel free to download and print whatever you need. The shelves easily slide…
Easily remove and resintsall DW4 bezels without scratching them or the lens. Accepts 1/4" drive.
Made this cause i bought a Sony XAV-AX100 second hand, and it came only with the previous frame, since i was going to install it into my own cars frame which is a Honda Civic MK8 Hatchback from 2007, i made a simple small bezel that…
Bezel for a 16x2 LCD This design is to mount a common 16x2 LCD onto a front panel. You will need to cut a hole at least 70x20mm. The bezel is designed to cover up the hole so if your handiwork is as rough as mine, you won't see it! I…
Simple Clamp for an ASUS Bezel Free Kit to get an tension connection between both Holders. This helps a lot for better grip, especially with Curved Screens. As towing cable i used Filament. I uploaded two Versions. One Clamp is for the…
This is a tool that allows you to unscrew the bezel on a Wurkkos HD10 right angle flashlight. It can be used with a 1/4" drive ratchet, or just your fingers. Files: - HD10-bezel-tool-v2.stl - Bezel tool Recommended Print settings: - PLA…
Tool used to unscrew the newer Convoy H1 bezel with the 4 indents. This isn't for the smooth bezel. Printed in PLA , works fine.
This is a bezel I designed to fit into the center of the dash between the two vents. More info here http://csmatt.com/notes/?p=5 . The original was fiberglass, but I wanted a model I could easily tweak in order to allow for a different…
Chery Amulet (A11/A15) Interior Door Handle Decorative Trim Description: 3D replacement for the interior door handle trim of the Chery Amulet (A11/A15). Designed based on original OEM geometry to ensure a perfect snap-fit into the door…
Early models of the LNR Precision Mountain Topper 5B radio (MTR-5B) used a four line LCD screen that had a blue back light that was seen all around the edges. Many people (including myself) found this to be distracting and hurt…
This is a screen back cover for the BTT (Big Tree Tech) TFT 35 V3.0 for the ender 3 and ender 3 pro when using a 3D printed bezel. You will need 4 M3-16 button head screws.
I put this on a box for a DIY BedJet Video here:
Sun Ultra 20 front bezel clip. may fit other Ultra variants of the same generation.
I picked up a pink PS2 Slim a while ago, which for some reason had the Bezel on top ripped off. This seemed like a nice opportunity/reason to remake that part, it's a simple enough model that made a nice quick practice for me. I have…
Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…
Consol Bezel for the 1st Gen Toyota 4runner (and likely pickups). It is not an exact replica, but it fits well. Deletes the 12v cigarette lighter plug. Step included, please attribute any remixes or sales. (CC-BY). Bambu suggests laying…
This is a remix of the only speaker mounts I liked for these. I remixed them to sit on the back of my samsung tv.
Fluke 45 back plastic bezel. print with support oriented as the default orientation of the file for better results, using PETG for a stronger part. For the fluke 45 I've also designed the power button extender. if you want to support my…
This isn't great - consider it a work in progress. It's designed to hold a piece of red lighting gel or other thin red plastic over the display. I haven't bothered to make it snap together or anything yet…I just stuck an xacto blade in a…
Bezel to support the blog post at https://arduinoplusplus.wordpress.com/2023/11/19/led-matrix-hourglass-timer/ No special print setting required.
This 3D model file offers a customized top cover and front bezel designed specifically for the Lenovo M920q to accommodate the MSI RTX 3050 LP 6G graphics card. The top cover has been extended by 10mm to ensure a perfect fit for the GPU,…
A panel mount for Keystone Connection that looks like the Black Box Keystone Panel Mount Bezel
Separated into two parts so smaller printers can handle it as well, glue is not needed.
A wallmount bezel for the Wemos 0.96 OLED display. It also includes a space for the SHT30 temperature and humidity sensor. Display should fit snuggly, but install carefully. sometimes the very thin glass is not mounted 100% square and can…
Inner Bezel that fits directly on top of Open DSKY PCB to create lower layer (bottom bread) of sandwich with Outer Bezel (as top bread) capturing the Laser Color printed lampfield and acrylic window. Print instructions Galaxy Silver PLA…
This had disappeared from our 80 series, so printed one. Printed in PETG. PLA will probably melt
I designed this spacer to fit behind an RJ45 wall plate and provide 5mm spacing so the wall plate can sit flat when installed. I installed my wall plates by drilling a hold in the ceiling and running the ethernet cable through. In order…
My Bathroom sink overflow bezel ring broke while cleaning it. Being housebound after surgery and… well.. bored…. I decided to manually measure and draw it up to print. Printed in PLA+ White and it worked perfectly first go! Suits hole in…
Custom Monitor Support: Designed for Stability and Perfect Alignment I designed this custom support system to overcome the limitations of the original ASUS stand, which is designed for 27-inch monitors. My setup features three 32-inch…
Apple's Macintosh PowerBook 1400 has a common failure these days -- the thin brackets that hold the front bezel to the CD-ROM drive module tend to crack and break. Since the machine is from 1996, brittle plastics are to be expected, so…
This is a reproduction of the top bezel of the IBM ThinkPad 730T Tablet computer. You can find more information in my restoration video below:
My Thrunite Archer Mini flashlight was not powering on properly. The bezel has 4 lobes that needed to be engaged to turn. Couldn't find an existing tool/socket to do it, and using pilers was not going to work. Designed this in FreeCad. It…
Bezel to install 2 52mm gauges in the radio tray of my 79 Pace Car. Should fit any 79-86 4-eyed Mustangs. Update 08-26-2017 : checked on the Pace Car ... fits well :D no longer a WIP Update 08-20-2017 : split in half so I can print it,…
extended left side bezel to the BTT Pi and TFT35 spi extension for Ender 3.
I have had it in my car for over a year. Started with PLA but that didnt work out so well in the summer. I now have it in ABS. Anyone who prints it may want to modify it a bit because after about a year it has shown a bit of scratching on…
Simple bezel to help hide those less than straight dremelled cut outs for a 20x4 LCD display
A set of bezel punch tool for round, oval and drop and a 45X loupe
I tried models from other creators, but they didn't fit as I wanted, made my own.
This might be a niche item, but here goes anyway. I use a set of Samsung Odyssey G9 ultra-wide curved (1m radius) monitors for flight simulation. When I butt them together, two 1 cm bezels end up right in the middle, making a 2 cm black…
I found an awesome model for a SD card extension bezel, allowing for the use of a micro SD to SD card ribbon style cable adapter. This way, I can use SD card's I already own, and reduce the wear on the micro SD card slot of the printer.…
I would recommend printing it in PETG for the temperature resistance, but PLA should be ok too if your car does not see much sunlight, a well-calibrated printer is recommended for better print quality.
I call this the BG68 ( Budget68 ) This is a drop-in case for the Tester68 keyboard. This is a case design inspired by the OG60 from KBDfans. Hence the name BG68. It doesn't use any mounting method since the PCB, foam and plate are dropped…
This was originally for the VCore4 electronics enclosure. The cooling fan was supposed to be inside of the cover. One time while putting the cover back on the electronics enclosure, the wires for the cooling fan got caught in one of the…
These are 2 Gridfinity modules with which you can store the exchangeable bezels of the CMF Watch Pro 2.
Replacement front faceplate/bezel for a laptop style CD/DVD drive After printing, you may need to trim the stem to hit the button properly
If your plastic bezel is sagging due to the screws breaking the the old plastic posts then this print is for you. These screw savers replace the old screw posts (all three different styles). These fit and work without glue but you can…
Beetle dash bezel nut tool. You may only get a couple of uses.
I used measurements from a damaged OEM part to create this printable version. I iterated through a few printed versions until I got one that worked well enough for my purposes. It's a bit finicky in that you can crack the screw posts if…
The Keychron K2 HE (special edition) has wood trims on the sides. I want to create storage space for the USB dongle, this is step 1; recreating the trims. Edited on Jan 22 after feedback from Drazor; my models were 127 mm long, whereas…
Overview A screen bezel and a protective screen cover for the Qidi Plus 4. In anticipation of Qidibox a multicolored version is available! Let's make it our first multicolored Qidi print! Printing Print face down, no supports required.…
I love my homelab, but I felt that it was just missing something special - Thankfully, I have a 3D printer and enough passible CAD skills to change that! This model is designed to fit MOST 2U Supermicro servers and either friction-fit in…
Made in Inventor I designed this for my Factory Five 818 kit car. The gauge cluster is very recessed in the provided fiberglass dash. After covering the dash in fabric, it left a very ugly seam where the gauge cluster met the fabric. This…
Increased bezel width to hide non-functional parts of the screen. edit 26/03/25: I initially uploaded the wrong STL. It should now be fixed.
This is a replacement panel for the Thermaltake T600 tower pc case. The case comes with a second panel to use with the Thermaltake LCD, but that screen is much smaller. This bezel is designed to match the clips and protrusions on the pc…
hi this is a model I designed to hold the Asus bezel free kit on acer 32" monitors, mounted at 65 degrees
check out my custom 3d printable framework bezel! here is the guide to put the thing together. You will need some nickel strip (the ones used in LiIon battery soldering) like this and some glue. Thats it. edit 07.03.2025: added fusion and…
Great way to stylise and change the colour of downlights without replacing the whole light. To fit 48mm ID and 88mm OD, 3mm deep.
In Convoy 4x18 flashlight - glass lens is held by ring - which it is hard to unscrew by hand. Here I made some tool for help :) Print from any hard material (if you don't use it in +45'C environment - PLA should be ok) with 3 walls, and…
Replacement set of Caroma 2000 Series Buttons & Bezel. Great for when your toilet brakes or your buttons have gone yellow. Use the 2 springs from inside your old toilet buttons by pushing out the buttons from the bezel (this might take a…
A parametric bezel / coin holder to use a coin as a keychain or pendant. Some models are already available as STL files: 1 CAD 1 and 5 Japanese Yen 1 US$ 1 € 1 £ To generate other models the FreeCad parametric file is attached and you can…
Simple extension for the ASUS Bezel Free Kit. The extension has two different sides, depending on the orientation you can change the distance to the screen. If this is not enough, you can use the spacer to increase the distance to the…
I added a stand on top of the Bezel in order to support an access point that I had nowhere to place.
Use to hold these hygrometers securely in the filament roll when storing in vacuum bags. https://a.co/d/a6vdoKm
This is a replacement front bezel for the Apple PowerBook 500 series (520/520c/540/540c). It gets under the display where the microphone is.
This is a replacement front bezel for the Apple Multiple Scan 17" Trinitron Monitor.
Remake of the G-Shock DW003 Bezel Ring as replacement part (not original)
This is a bezel I made to replace the cheap tin-like bezels that came on my pocket bike, they were all bent up and pretty much unusable. Should fit a few different pocket bikes, just need to rotate them when mounting. Should be able to…
Quick model I threw together in order to swap a spot optic into my new DW3AA.
Blank instrument bezel, you can design a file for whatever holes you need and use it as a modifier in the slicer to customize
