Extension ASUS Bezel Free Kit for 32" Screen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extension ASUS Bezel Free Kit for 32" Screen
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 324
- Wydruki
- 0
- Wyświetlenia
- 1811
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple extension for the ASUS Bezel Free Kit.
The extension has two different sides, depending on the orientation you can change the distance to the screen. If this is not enough, you can use the spacer to increase the distance to the screen by a further 1 or 2 mm. More Distance to the Screen will hide a bigger bezel of your Screen.
The sleeves serve as spacers for the rear counterholders and are not always required. However, my screens do not have a straight surface at the back and it has been shown that it is best to clamp the holder as close to the edge of the screen as possible.
In the best case, the extension is printed upright with a brim for bed adhesion.
2026/02/16
- I added an new Spacer Sleeve with 3 Flat Cutouts (0°, 10° and 20°) for different Angles of the Screen Backside.