Bambu P1S slim SD Card Bezel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Bambu P1S slim SD Card bezel lets you use your normal size SD cards with this printer. Happy printing!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found an awesome model for a SD card extension bezel, allowing for the use of a micro SD to SD card ribbon style cable adapter. This way, I can use SD card's I already own, and reduce the wear on the micro SD card slot of the printer.
However, I realized I could make it fit my P1S a bit better. I edited the model by reducing the bezel size to 8mm. This does create an overhang, and therefore printing with support is needed, but that's a trade-off I was willing to make.
The ribbon cable I used: https://www.amazon.nl/dp/B00S6AMWK2
Printed on my P1S with slim tree supports and .12 mm High Quality preset.