Liczymy pasujące modele…
This regular SDcard shapped contraption allows you to store microSD in places designed for a regular SDCard. It's a straightforward, sub 10 minutes print. The ones in the pic are printed with the default 0.2 profile with a 0.4 nozzle.…
Usb Stick Cap with SDCard holder integrated for Artillery Sidwinder X2/X1
WARNING: Not yet tested on a live server for fitment. If you’re able to test it before I do, please let me know in the comments. Replacement bracket for external ethernet / sdcard Dell module (CN-0x99HC) used in Dell PowerEdge R430/R630…
It's an standt to hold SD/Micro SD card holder it also hold's USB Stick Holder
I wanted to print Richard Horne’s “BigBox 3D Printing Storage - Tools, Nozzle, SDCards & Nicknack's boxes” but was concerned that the BigBox side cutout clamps by Alex9779 may restrict them sitting in the corners, so i’ve simply cut away…
This is the SDchain, a simple keychain module for your sdcard or sdadapters for microsdcards. It has a snug fit nicely securing your information by your key. This helps always carrying the sdcard arround and not forgetting it. The design…
Remixed the bottom plate to have SD-card acces. After a few failed octoprint upgrades I was tired to remove the bottom plate everytime. Check also my other designs: https://www.prusaprinters.org/social/201278-hans/prints
It's a simple case for the BUDI 9in1 Sdcard holder and reader, it doesn't affect the opening and closing of the gadget, the phone holder tab on the bottom is the only thing that is obstructed by the case. I designed it to be printed in…
Hacked my favorite USB holder and created a smaller version with HSW support. Added a V2 with the sides shaved a bit.
This is an addition for the Ender3 90° Belt printer from Additiva3D.
Remix: To add support for sdcard access from front panel, and space for then nvme drive screw on the OPI 5 Pro. Found a four pack on amazon for “Micro SD Male to Female Flexible Extender, 15cm/5.9in Micro SD Card Extension Cable”… it just…
I liked the original case but my antenna is much bigger than the default one, so i used the opportunity to make it thicker (so that the batteries fit) also add a second battery(wich works sort of like an handle), these are the battery…
I dont need no 20 nozzle Box, i only have 4 in use 0.25 , 0.4 , 0.6 and hardened. So since i use Octoprint my Scard reader is free, i can also use it for holding my nozzles. Super minimalistic, its not in the way, and i allways have them…
This is a really old model I made in 2021 which improved the usability of the MonoPrice Select Mini V1. I always had trouble using the microUSB and SDCard so this panel has a recess so you can't miss it. It also has a 40mm fan mount with…
Usb Stick Cap with SDCard holder integrated for Artillery Sidwinder X2/X1
WARNING: Not yet tested on a live server for fitment. If you’re able to test it before I do, please let me know in the comments. Replacement bracket for external ethernet / sdcard Dell module (CN-0x99HC) used in Dell PowerEdge R430/R630…
I love print-in-place its just so magical! SO I made one of my very own! too keep all my micro SD cards in one place :D NOW you can too! Enjoy! Very much inspired by JRad's Print in place SD Card Keychain
USB and SDcard holder Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: --- PLA Black Category: Tools
I found the idea of a USB plug protection appealing, but the designs were not easy to print or need sticky tape for fixing which, over time, might come off. So I decided to do my own design. This design features: Snap on assembly (no…
I removed the whole front unit of my Ultimaker 2 because of switching to Repetier firmware. Category: 3D Printer Accessories
Simple sd card holder made to fit the left bottom corner of your ultimaker2. Used the opensource files by ultimaker to get in de inner curve just right Made with bleeding edge version of openscad (so no source file) Category: 3D Printer…
Use up not one but two colours you have barley nothing left of! Set to distinguish up to 6 SD Cards elegantly but as minimalist as possible. Designed to work with SDcards used on the MK3 models. One filament change required for maximum…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/apQOVKbUFvv Category: 3D Printing
Remix of the model for the Ender 3 V2 from here : https://www.thingiverse.com/thing:3534331 I extended the back end of the slanted SD card slot to accommodate the ribbon cable. V2 file has the additional hole for securing to the bottom of…
insta360 one r SdCard Cover Buy a Coffee for Me https://ko-fi.com/pogotrainer
(micro)SDCard gridfinity holder 1x1x6 stackable 3 SDCard 8 microSDCard 4 inside 4 in the wall (a bit loose, sorry) , with FreeCAD ( Realthunder fork ) file.
The SD Card is difficult to insert and remove without long fingernails, or tools and good eyesight. This simple tool aligns with the frame to push the SDCard in the required amount to lock it or release it.
Note: This accessory is designed for Keter Pegboard and not tested with other pegboards Print suggestion: Print with Cura 4.10 "tree supports" Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: GST3D PLA+…
You need to print a hollow insert from the original model to use this It can fit: 3 full size sdcard 6 micro sdcard 8 usb the distance between each usb is 6mm i updated the model but didn't reprint from 4mm so if there is any issue, feel…
This is a holder for USB sticks, SD and MicroSD cards adapted for the honeycomb storage wall. this model can hold up to 6 USB sticks, 18 microSD cards, 6 standard SD cards or a combination thereof. I printed using a TAZ6 and Polymaker PLA…
SD card loc for Safecast bGeigie Nano Lock, protection against SD card ejection due to shocks v2 - bugfixes
Just a simple cover to go over the USB microSD card reader so you know what printer it came from when moving files aroun
SDCard Slot Guide for easier insert of the SDCard. you have to change it to your case
Summary: A Holder for SD-Cards, Micro SD-Cards USB-Sticks and a small compartment for adapter Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2mm Infill: 25% Filament color: gray Filament material: PLA
Needed a little tidier handling of all the cables that I have connected internally in my amiga 500. I have a Vampire accelerator, and needed somewhere to put the hdmi, network and sd card holder. In addition, I have a switch to change the…
This is my SD-Card storage solution i designed using this Gridfinity Addin for Fusion360 . It can store up to 13 SD-Cards, and 9 Micro SD-Cards. The bin has little grooves on the inside, so the lid snaps in place and stays on. V11 Update…
* Italiano * Non mi piace per niente avere l'ingresso della tessera MicroSD sul retro della Alfawise U30, non mi piace neanche il formato Micro-SD. Cercando in rete ho trovato vari adattatori ma tutti quelli che ho trovato fanno…
A remix to fit the back of the Checkmate 1500 case, needs 2 M3 screws and bolt to panel mount it. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker…
Hello folks, An idea - camera flashlight hot shoe cover with integrated Micro SD Card holder or cover. Printed with PLA, layer height 0,12mm, that is all. Enjoy
Remixed two very useful Things to create another useful, I think, Thing There are 2 version, one requires the new plain top and the other should work with the original toolbox top
I have more micro SD's than regular SD's hence the remix The latch isn't very strong and mine broke off the first time I used it unfortunately
Moin Ein Halter für eine MicroSD Karte, diese wird einfach in den Schlitz geklemmt (oder geklebt). Passt anschließend noch in den Ender 3 MicroSD Slot und auch in den Card Reader. Da ich die Karten immer irgendwo liegen lasse, kann man…
I wanted some slots to hold a few extra SDCards. Supports may be needed depending on your printer.
SDCard holder for Ender 3 Pro. I moved the mainboard to the back of the printer and I'm now using a SDCard extension cable to bring the SDCard back to front. Couldn't find a proper housing / holder for this configuration so I designed my…
A USB, SDCard and MicroSDCard Holder for attach to Cooler Master QUBE 500. Print the logo with horizontal expansion of negative 0.1 mm. Use the diagonal base to bed for better printing. No support needed. Use glue to fix the base hook…
Featuring a tiny Micro Sdcard holder for your pocket. I needed this so i made this in fusion 360. Keeps your sdcards safe while travelling, or just for stationary purpose. You can easily print it almost in a hour.
I changed the original f3d file to increase the microSD slots and decrease the regular SD slots. White bin is SUNLU PLA+, lid is Overture Transparent PETG. 0.2/0.4mm layer/nozzle on X1C.
This is a 3 part mount for a SDCard extender from Amazon (https://www.amazon.com/dp/B07PY7QCWV) the tolerannces are pretty tight, but that make it look custom fit for the part. You will need a M2x20 and a M2x12 screw to put it all…
SDCard and µSDCard holder (9 +9) with a design look Print Settings Printer: Wyper Rafts: No Supports: No Resolution: 0.15 Infill: 20% triangles Filament: eSun PLA + Dark red Notes: 215° head / 70° bed and set wall thickness to 1 mm or…
Die Entwicklung der Tools am Arbeitsplatz schreitet voran. ;o)
Created another version that doesn't have the microsd card slots, for those like myself that don't frequently use them. https://www.printables.com/model/714416-cfecpress-type-b-and-sdcard-gridfinity-1x2
Sticking this frame in front of the SD card slot makes it easier to insert the card. Ha ezt a keretet az SD-kártyanyílás elé ragasztja, könnyebben behelyezhető a kártya.
I created a small usb holder for the stock sdcard reader. It clips into ender's rail. Printed on its side,
Remix with SD card slots only and more defined muscles for fdm and smoother
YAHU - Yet Another Holder for USB I found an already pretty nice usb organizer (as linked) but a for many others there aren't any usb-c ports. There will be a second version in the future with a few improvements (the USB-C is pretty tight…
Hi there! I designed this desk organizer and wanted to share it. It has room to place a smaller print with your logo or name in the front and it has room for many microSD cards and SIMs. Most designs have few micro SD slots so I decided…
With the X1plus coming soon, why not protect your enhanced printer firmware with an sd card/ bumper cover. This will protect the edges of your screen and also prevent accidental removal of the sdcard which is a no-no for the custom…
quick one off to mount a wyze cam on a magician X, you can either use a dead sdcard, an extra card adapter, or the included blank. screw or glue. Category: 3D Printer Accessories
USB, TF, micro SD, SDcard Holder using Vase mode (Spiralized outer contour in Cura). Holes for mounting are 3mm. This is a remix of https://www.thingiverse.com/thing:4499792 which is a remix of https://www.thingiverse.com/thing:2835728…
This holder is designed for the Hama card reader which has a dimension of 73x19x11 mm. The card reader that came with the printer broke after 3 uses:/. The holder needs to be printed with tree supports in the orientation that is used in…
