Voron Skirt Adapter for SDCard Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Voron Skirt Adapter for SDCard Extender (https://www.amazon.com/dp/B07PY7QCWV)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 355
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a 3 part mount for a SDCard extender from Amazon (https://www.amazon.com/dp/B07PY7QCWV) the tolerannces are pretty tight, but that make it look custom fit for the part.
You will need a M2x20 and a M2x12 screw to put it all together.
Assembly is pretty easy, sand the mating surfaces down for a nice flat fit (optional). Remove the SDCard extender PCB from the original plastic case and insert the extender PCB into the “Outside”. Insert the “Outside” and PCB thru one of the top honey combs in the skirt from the outside. Slide the “Inside Top” over the PCB adapter to lock it in place and secure it with a M2x12 screw. Slide the “Inside Bottom” below the PCB and secure it with a M2x20 screw.