A500 Side expansion port with microhdmi, sdcard, network and switch

Needed a little tidier handling of all the cables that I have connected internally in my amiga 500.

I have a Vampire accelerator, and needed somewhere to put the hdmi, network and sd card holder. In addition, I have a switch to change the dfo / df1 disk drive.

So i modeled this little thing.

Print the four pieces (Addon, ExpansionPort, clip and bottom lid) and assemble it with som screws:

• Two M2x10 mm screws to connect the box with the expansion door
• Two M2x6 mm screws for the microhdmi clip
• Four M2x6 mm screws for the bottom lid

Take a look at the pictures for some visual descriptions.

You should use just a little force when you snap the ENC28J60 Ethernet Module into place.

The Micro HDMI connector socket is designed to hold the Micro HDMI Type D Female FPC Connector Socket with a flat cable. Search ebay for "Micro HDMI Type D Female FPC Connector". https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313&_nkw=Micro+HDMI+Type+D+Female+FPC+Connector&_sacat=0

You will also need one flat cable (FPC Flat HDMI Ribbon Cable) and one HDMI Type A male connector socket (HDMI Type A FPC Connector Socket).

Recommended hdmi cable lenght is 20 cm.

Here is a package with hdmi female, male and cable: https://www.ebay.com/itm/Type-A-Male-FPC-to-CYFPV-Straight-HDMI-Female-Flat-Cable-for-HDTV-Multicopter/382598636360?ssPageName=STRK%3AMEBIDX%3AIT&var=651361237516&_trksid=p2057872.m2749.l2649

I have this as my microsd extender (25cm): https://www.ebay.com/itm/New-25cm-Micro-SD-Memory-Card-Slot-to-TF-Card-Extender-Cable-Extension-Linker/303304935817?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648

This is the switch i'm using: https://sordan.ie/product/530/boot-selector-df0df1-df1df0-signal-sel0-from-sel1-amiga-500/

But you can of course use a switch to whathever you like as long as it fits :)

And this is a nice microhdmi to hdmi cable: https://www.ebay.com/itm/150cm-Micro-HDMI-Male-to-Standard-Male-Cable-Lead-Full-1080p-Tesco-HUDL-1-2-EU/162120162262?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648

Print Settings

Printer Brand:

Creality

Printer:

Supports:

Yes

Resolution:

Infill:

40%

Category: Computer