Liczymy pasujące modele…
Taking inspiration from my original fidget toggle switch , I designed a print-in-place version that uses about 8 grams of filament and takes about 20 minutes to print on my X1C. This model is experimental (it's definitely still a…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
This fidget toy is a tiny, clicky toggle switch! It's fully printable in about an hour and is only four pieces. You can change the "snap" effect by using either spring option and/or different materials. Want to sell prints of this model?…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
(⚠ FIRE HAZARD ⚠) This Lego compatible outlet and light switch cover are perfect for children's rooms or just having fun. Decorate your light switch or outlet cover with Legos, or just have fun and play. Great Remix for rocker switch by…
Wydruk około 1,61 €–1,96 € nettoWstępna wycena jednego wariantu
Protects your Joy-Con sticks from getting drift issues. Simple slide on and pull out. Prevents from tilting and clicking the sticks during travels. Available for Joy-Cons and the Pro-Controller.
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Prevent accidental switching with easy "override" by bending the arm. A set of these are handy for Phillips Hue / SmartLight systems. GCode and 3MF file includes two layer swaps. From Thingiverse user Yllonnoce…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Remix of the Bokoblin Chest with slots for 10 Nintendo Switch game cartridges
Wydruk około 4,42 €–5,41 € nettoWstępna wycena jednego wariantu
An OEM profile keycap that clearly marks an exit.** Keycap base model from another designer on Thingiverse, check them out here: https://www.thingiverse.com/thing:2783650 **Not just for Semiologists! Print instructions 80% infill 4 shells…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Manabun design is very accurate. I made quick remix for non-slip pads that I have at home. Dimensions 18 x 5 mm. Pads are very tight in holes. Print with 3 perimeters and 15 % lightning infill.
Wydruk około 3,77 €–4,61 € nettoWstępna wycena jednego wariantu
General information This is my slightly modified version of this model on a different platform. Initial credit therefore goes to the original creator. I made the SD card slots tighter and removed one to make room for more Switch…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
This is a remix of Print-in-Place Fidget Toggle Switch, but with "Click!" text, because I didn't want it to be blank.
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
Overview Easily replace or upgrade your old or broken light switch covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of Light Switch Lock by Yllonnoce on Thingiverse. I've removed the “no” symbol and removed the plastic behind the symbol to simplify it as much as possible. This design prevents flipping a light switch off, which is useful…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on empirical studies, I discovered that the mini Pro Controller (that I bought on AliExpress and that works absolutely well for my 3yo son) is 82.6% of the original. You can use my gcodes, or you can go to the original model…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
I have 2 light switches in my room to control one light, and for one of them when its status is changed it makes the light go all strobe-y and broken. So I made this cover to prevent anyone from accidentally using that switch. (I don't…
Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 4,42 €–5,40 € nettoWstępna wycena jednego wariantu
Double-sided short curved switching track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2…
Wydruk około 1,97 €–2,41 € nettoWstępna wycena jednego wariantu
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 3,40 €–4,15 € nettoWstępna wycena jednego wariantu
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 4,24 €–5,18 € nettoWstępna wycena jednego wariantu
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 3,84 €–4,69 € nettoWstępna wycena jednego wariantu
Void's case, just compatible with Typeractive's wireless 6 column MX Corne PCB layout.
Wydruk około 6,60 €–8,07 € nettoWstępna wycena jednego wariantu
Double-sided three-way curved switching track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track…
Wydruk około 4,42 €–5,40 € nettoWstępna wycena jednego wariantu
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 3,36 €–4,10 € nettoWstępna wycena jednego wariantu
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena jednego wariantu
Double-sided curved switching track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 2,67 €–3,26 € nettoWstępna wycena jednego wariantu
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 3,26 €–3,98 € nettoWstępna wycena jednego wariantu
Double-sided curved switching track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu
I created these covers to protect our Nintendo Switch Pro controllers while traveling. I noticed that some controllers had drained batteries upon arrival because the buttons were frequently pressed in the luggage, causing the controllers…
Wydruk około 2,02 €–2,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modified model from @PrinterIsComing to have the same color finishing on the same level - it makes it easier to print it in color with manual filament switching. The original badge it pretty thick, it can be scaled down to 75% at Z axis.…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
After remixing the pro controller holder for the first time with a Zelda - Tears of the Kingdom look (find this one here: https://www.printables.com/de/model/826335-nintendo-switch-pro-controller-stand-zelda-totk-re) I decided to do some…
Wydruk około 2,42 €–2,96 € nettoWstępna wycena jednego wariantu
Power tool safety switch lock Lost a couple of the original ones and was just swapping as i needed the tools. Decided to just make my own. I used PETG .4 nozzle .15 resolution suggested (ok with .2) Supports in file (painted on) Brim not…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You want to play with your Switch lying on bed or sofa but the screen is not in a good position?! This 3D model is for you! The best way to play with this 3D design :) 28° of viewing angle and you can charge your switch easily too! Enjoy!!
Wydruk około 6,69 €–8,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The orginal Y endstop mount (by Ben Levi) does not line up properly with the specified endstop switch (kw11-3p). This remix fixes that by making the holes 9.5mm apart as specified in the dimensions for that type of switch. It also centers…
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
grips for the nintendoswitch procontroller, 3D scanned and smoothend
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Sidecover of most Lathes is combined with a Safety Switch. But sometimes you have to test the proper seat of your gears or maintain something and the motor will not move, because the circuit is only closed only when you have attached…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
The switch was difficult to find on the bedside table at night, simply because it is so small. The switch also slips around quite a bit on a smooth surface. So I designed two different bases to make the switch more prominent. The V2 is a…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
Did you ever wonder what to do with the remaining 3 Switches that you had left over after completing a build? Were you ever sad that you couldn't show off how amazing the color of the switches matches the rest of you build? Did you ever…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Practical stands for the CoreOne. The stand without a switch can be mounted on any corner of the CoreOne. The stand with a switch is available in two versions: left/right. For feet with a switch, an additional M3x10-20 screw with nut is…
Wydruk około 5,91 €–7,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I sometimes like to play with my controllers laying on a table or desk, and I didn't care for the natural angle the Switch 2 JoyCon2 Grip leans down and away. After modeling a few variations, I also realized this could look like a tongue,…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
I use my Philips Hue v1 dimmer switch as a scene controller in my office. I wanted it mounted under my desk to remove clutter but keep it easily accessible. I created this mount designed to work with 3M Command Strips to mount the dimmer…
Wydruk około 2,69 €–3,29 € nettoWstępna wycena jednego wariantu
This little gizmo holds a miniature pushbutton switch (see photos) and has magnets on the bottom to enable it to be held firmly on steel/iron metal surfaces. The pushbutton switch used is designed to be panel mounted in a 1/4" (7mm) hole.…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
This is a Remix by Jimbo, has been modified for the newer version of the switch. Also shortened the bottom and placed a hole in to hang it off a keychain or a lanyard. TPU Printed it using eSun TPU 95a and made it 0.8% larger to…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
Info: just a simple idea, how to make life little easier print 2 of these, glue it to the switch (or use 2 sided adhesive tape as me) and that's it Print instructions: fluorescent filament
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
This Light Switch Cover prevents someone from accidentally shutting off the light switch without covering the sensor. I have installed these light switches in the bathrooms (and several other rooms) of my home to help with younger…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
This is a redesigned power slider switch button for the Black & Decker Cordless Leaf Blower (LSW321). My aging mother no longer has the full function of her hands due to arthritis. This presents a problem as she is unable to apply the…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
I've an unreasonable fear of the garbage disposal. This hinged cover prevents accidental switch presses. Designed for Leviton screw-less plates, but you can adapt it for other brands using the attached Fusion360 source file. Print in…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Motivation I found this nice model of "Helferlein / Little Helper" by DIY Wizard (based on the popular model "Dummy 13"). To illuminate the bulb you can order a magnetically switchable device ... which I did not have available for a short…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With this holder you can use a few screws or some double sided tape and a few cable ties to keep your inline switch where you want. No supports needed.
Wydruk około 0,41 €–0,51 € nettoWstępna wycena jednego wariantu
Robitornic Powerswitch Holder and Cover for the Reciver Box The Switch https://shop.robitronic.com/de/robitronic-elektronischer-schalter-r01612 the cover closes the hole from the manual switch the holder / cover fits on the buggy and…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Unfortunately I can't give the exact name of the model of the light switch because it was already so old ;) This is my Lightswitchdimmer. It is a replacement for your normal dimmer of the lights switch. I made it because I have a dimmer…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Everyone knows blue LEDs are the bane of our existance for anyone whose work computer lives in their bedroom, so this print is a simple LED cover that covers up the obnoxious (and frankly redundant) blue LEDs on the front of this…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
Designed to be compatible with Cherry MX style key switches. Just add one of those, a key cap, and a lanyard. It's recommended to use XDA form factor key caps, but others should work also! The only overhangs are inside the hole where the…
Skull Key Switch Fidget Toy Simple fidget toy that is quickly printed and easily assembled. Choose the print bed with the emote you like in the .3mf project and print! No supports needed! Printed in approx. 30 minutes! Assembly For the…
This cat paw-shaped stress-relief clicker features a 3D-printable spring , allowing use without a keyboard switch. However, we strongly recommend adding a keyboard switch for optimal clicking performance and tactile feedback. Key…
The Deep Calls... 🐙 A tentacle rises from the depths to safeguard your Playstation 5 controller. Functional, eerie, and impossible to ignore. Tentacles not your thing? How bout dem bones
I know that there are already similar models on thingiverse and PrusaPrinters , however, I wanted to have one where only games go in. That's why I made a completely new design by myself. The cube is slightly larger and you can directly…
I remixed agepbiz’s XBOX Controller Stand because it was amazing, while respecting the design to make it suitable for a Nintendo Switch Pro Controller. The remix source is here.…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is “Motor Drive for Stand - Auto-Stop Function” for an amazing project " Filament Spool Switcher & Winder" Design…
Features: Is fully 3D printable. No extra hardware needed. Fits a big variety of toggle switches. The compliant spring gives the cover a satisfying snaping motion. If you have a lot of switches to cover and want to tell them apart, you…
Make your own super addicting/satisfying Void Switch ( https://github.com/riskable/void_switch ) fidget toy! There's a lot of words below but assembly is actually super simple and straightforward. Most people can figure it out without…
Original part : https://www.myminifactory.com/object/3d-print-nintendo-switch-joy-con-wheel-pro-29687
I took David6722's genious OTF Design and tweaked it a bit, I added places for screws, a pocket clip, altered the button and made a few more improvements. Prints very easily but may need some supports on the newly created overhangs. Print…
A collection of cover plates for outlets, light switches, and more for all your household needs! Print face side down without a brim. I wanted to create a set of cover plates that leaned into the subtle differences of 3D printing vs…
"Igor, throw the switch!" "Yes, master." Instructions Check out the 2022 updated version posted here: https://www.printables.com/model/161850-frankenstein-lightswitch-plate-2022-version Update: It's coming up on Halloween so I figured…
Here's an insert for my Print In Place Mario Coin Block that holds 16 Nintendo Switch game cartridges. Are you interested in selling your prints of my designs? Join my Printables Club , and start making 💰 with your idle printers!
cap for 12x12x7.3 mm button switch
Use my simple program to create fantastic switchable business cards. Before using the program, you need to prepare two images. The Program lets to combine the images to switchable card. Here is the link to download free version of the…
Features: Is fully 3D printable. No extra hardware needed. Fits a big variety of toggle switches. The compliant spring gives the cover a satisfying snaping motion. The .STEP is available too if you have to make it fit for some weird…
TPU parts for the itty bitty LS v2 ultra
Description This upload contains several CAD models of electrical switch components compatible with Busch-Jaeger Reflex SI . All parts were independently modeled based on real measurements of existing components. They are not original…
CHECK OUT THE IMPROVED VERSION HERE Description This is a toy Automatic OTF Knife I designed. What makes this design different from a typical switchblade is that it not only ejects the blade when the switch is pushed forward but retracts…
A quick and easy-to-print controller stand for your new Nintendo Switch 2 Pro Controller with minimal waste. These filaments best match the Switch 2 color scheme: Sunlu or Jayo PLA Sky Blue (very close!) Sunlu or Jayo PLA Sunny Orange…
TPU Parts for the Five33 Lightswitch. We print all of our parts with Sainsmart TPU on Prusa MK3s
The top eggshell will snap onto the top of the chick so it stays put while you have fun clicking! Fidget with or without the eggshell on top. Parts needed - MX Style Mechanical Keyboard switch Print with supports on auto, all in the…
This uses two mechanical keyboard switches to make a moving shulker fidget toy. The box in the picture is fully open, and upon pressing the top, it closes fully and bounces back. Very fun to play with and a fun desk ornament or fidget…
To do the upgrade you need the following parts: 1x Frontplate (printed) 1x USB Extension cable 1x Powerswitch Extension cable You can find the upgrade instructions here: installation guide If you want a backplate, have a look here:…
This print could be very useful for people with disabilities and could give normal people more accuracy on certain games and joysticks, this print could possibly be put on PlayStation, Xbox, Steelseries branded controllers as well as the…
This spring is intended to replace a keyboard switch in any of my keyboard switch fidget tappers! It does not click, so it would be a good substitute if you prefer a silent fidget (or of course if you don't want to purchase keyboard…
Cover insert for a switchboard when there is an opening after a removed circuit breaker. The model is attached so you can adjust it to your desired width. The insert is not too stiff not too flexible, so perfect to be placed in place and…
Remix of ManubunLab stand for the Pro Controller. ManubunLab's version . I added player number indicators to the original model and scaled the width to fit the new Pro Controller 2. The stand is NOT modelled for the Pro Controller 2, but…
These are the power up flowers from Super Mario games, the same files can be used to make both a fire flower and the ice flower. All parts are oriented in their optimal print orientation and shouldn't need support. Print instructions No…
I liked the idea and found nothing alike on thingiverse. so i made this EDIT: Some people are having issues with the cartridges falling out. i dont know why it works for some people and some dont. To avoid issues i added two test files.…
This is a PS5 controller hanger that mounts under a desk or shelf. It features a slotted pass through to accommodate a USB-C cable for charging. I mounted this by using 2 command (picture frame mounting) strips placed in the recessed…
I made a Remix of IXPatch Bokoblin Chest for my Switch Games or Blue-rays i added 2 options to print the Chest - 2 pieces bottom and top - 4 pieces 2 bottom parts and 2 top parts (cut in the middle) you also need 2x M6 x 60 screws and 2…
This is a remix of the IKEA Skadis Xbox One Controller Holder With Lip (3 Hook) by LayerCake for a Nintendo Switch Pro controller. By extending how far out the cradle comes, the Switch Pro controller sits in the mount better.
This is an accurate recreation of a toggle switch guard used on the many control panels in the space shuttle. Included is a PDF are the part dimensions in case the standard thread dimensions of the switch are different from what you…
Remixed from: https://www.thingiverse.com/thing:4134048 Modified to work with my Havit keyboard. The original design didn't fit; the legs were a bit too close together and short to fit and stay in the switch (I understand this is a slight…
While there are other similar models out there, I created these from scratch, so I had them for a friend, and they all match (size/shape…). I printed them in black PLA per the request 0.20 layer height 10% grid infill. These can be…
TPU Parts for the Five33 Switchback PRO
Prints well with default settings. Be sure to print 2 feet and 1 arm. Push the arm pegs into the holes in the feet. They should fit snug but if they don't, try adding a drop of glue. Updates v1.1: Increased stealth factor by 50%. Made…
I tried to use @kulfurst Nintendo Switch Horizontal Flip Dock , but found that it doesn't fit the Ethernet version of the dock that is included with the OLED Switch. I redesigned the stand to fit the Ethernet dock from scratch, but…
By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in the future. Main features: free space in the shell for other modules; fastening only with magnets (8x2 mm); holes for…
🔧 Important: To achieve crisp, readable lettering, a 0.25 mm nozzle is required . Larger nozzles (like 0.4 mm) will not render the fine details of the raised text properly. 🧩 Two printing methods: Requires 0.25 mm nozzle for best results.…
This is a 3D model of the IEC320 C14 Power Socket that comes with a Fuse Holder and a Switch for IEC C13 Power Cable connection. It's designed in Fusion 360, .f3d files are included. I tried to make the dimensions as close to real one as…
Tpu Parts for the LS HD, Switchback HD, and Switchback Zero
If my stuff makes you happy, consider donating $1! Hope you all can make a buck on it yourselves. This is a replacement light switch plate cover that allows you to flip a switch further from the side. Good behind shelves and other hard to…
Another version of Servo Mount for Lego Train Switch. The others simple do not suit me well. All parts are printable, you will only need SG90 9g micro servo with a small screw (usually part of servo) and sure, the original lego switch…
This is a small Jack Daniels Logo sign for your wall or desktop. It is a really quick file to print. It measures 117mm x 159mm. Print at .2 with a color change at .6mm. Ptint it with black on white or white on black This sign is light…
