A500 Side expansion port with microhdmi, sdcard, network and switch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed a little tidier handling of all the cables that I have connected internally in my amiga 500. I have a Vampire…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 36
- Makes
- 0
- Views
- 475
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Needed a little tidier handling of all the cables that I have connected internally in my amiga 500.
I have a Vampire accelerator, and needed somewhere to put the hdmi, network and sd card holder. In addition, I have a switch to change the dfo / df1 disk drive.
So i modeled this little thing.
Print the four pieces (Addon, ExpansionPort, clip and bottom lid) and assemble it with som screws:
- Two M2x10 mm screws to connect the box with the expansion door
- Two M2x6 mm screws for the microhdmi clip
- Four M2x6 mm screws for the bottom lid
Take a look at the pictures for some visual descriptions.
You should use just a little force when you snap the ENC28J60 Ethernet Module into place.
The Micro HDMI connector socket is designed to hold the Micro HDMI Type D Female FPC Connector Socket with a flat cable. Search ebay for "Micro HDMI Type D Female FPC Connector". https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313&_nkw=Micro+HDMI+Type+D+Female+FPC+Connector&_sacat=0
You will also need one flat cable (FPC Flat HDMI Ribbon Cable) and one HDMI Type A male connector socket (HDMI Type A FPC Connector Socket).
Recommended hdmi cable lenght is 20 cm.
Here is a package with hdmi female, male and cable: https://www.ebay.com/itm/Type-A-Male-FPC-to-CYFPV-Straight-HDMI-Female-Flat-Cable-for-HDTV-Multicopter/382598636360?ssPageName=STRK%3AMEBIDX%3AIT&var=651361237516&_trksid=p2057872.m2749.l2649
I have this as my microsd extender (25cm): https://www.ebay.com/itm/New-25cm-Micro-SD-Memory-Card-Slot-to-TF-Card-Extender-Cable-Extension-Linker/303304935817?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648
This is the switch i'm using: https://sordan.ie/product/530/boot-selector-df0df1-df1df0-signal-sel0-from-sel1-amiga-500/
But you can of course use a switch to whathever you like as long as it fits :)
And this is a nice microhdmi to hdmi cable: https://www.ebay.com/itm/150cm-Micro-HDMI-Male-to-Standard-Male-Cable-Lead-Full-1080p-Tesco-HUDL-1-2-EU/162120162262?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Supports:
Yes
Resolution:
0,2 mm
Infill:
40%
Category: Computer