Counting matching models…
A mini floppy disk for your A500 Mini. I designed this to be printable and look great with a standard FDM printer using a standard 0.4mm nozzle(Prusa, Ender etc). But I've included a lot of detail(for such a simple model) that will really…
This wheel give to the YARDFORCE robot mower the capacity to clim slopes of 45° Print instructions big print, more then 24 h, I needed to place a cooler on the extruder motor , important no support for printing I used ngen orange 1.75 mm
No Amiga A500 was complete without a load of floppy disks scattered over the top ready to play. Therefor I designed a full-scale miniature floppy disk for the A500 Mini along with coloured blank disk labels. The Model is split up into two…
Display stand for the Amiga 500
Description Gotek OLED screen and rotary encoder external enclosure designed to fit the Amiga A500 Computer. Couldn't find an enclosure to fit the type of rotary encoder I bought, so designed this one myself in Fusion 360. Really pleased…
This is a simple 2 piece stand for the A500 Mini. Print the 2 parts with 100% infill to make sure there's a little bit of weight to them. 0.2mm layer height works well, but pretty much any height should be fine for this. This was printed…
Due to the lack of a available commercial version, here is my own video cage, tried with a sony a5100, should also work with a sony a5000, but i'm unable to test it. Arca Swiss compatible rail in the bottom, two accessory mounting points…
UPDATE 11/11/2023: Added rotated version of Pi, Emu68 and Amiga logo UPDATE 20/10/2023: Confirmed OK on A600, Added Pi and Emu68 logo A case for the MicroSD/SD Memory Card Slot to TF Card Extender Cable Extension. Created for the Amiga…
Needed a little tidier handling of all the cables that I have connected internally in my amiga 500. I have a Vampire accelerator, and needed somewhere to put the hdmi, network and sd card holder. In addition, I have a switch to change the…
Since I didn't want to drill holes in the beautiful case from A1200.net , I designed a small panel that fits directly into the expansion opening of the case. I use several switchable extensions and an RGB2HDMI mod in the Amiga. Holes…
70mai cover to make the dashcam more invisible in the car.
I replaced the 42RE transmission in my Dodge because it was quite tired with a rebuilt one. After removing it I am pretty sure I found the problem in the valve body but don't have the time right now to service / rebuild it. So I want to…
There are 2 versions: universal and perfect fit for younuon 92mm fan (which I recommend btw, it's quiet and cheap). You can cut 1mm from bottom – it'll be rigid enough. FYI : CZCL PSU's fan doesn't start immediately after printer starts –…
Needed a quick solution for my a5000 so i sketched this up. The 5U high version is untested but should work with no problems. It fits the Camera with the Lens i have on it and 2 batteries. I didn't make it with stacking it in mind as im…
one-piece cover I print the cover from TPU 95A. Putting on the adapter is best when the cover is still warm, I put it on with the USB connector facing forward. It takes a bit of force. two-part cover I print the two-piece cap from PLA.…
I designed an improved set of skids from my previous version, which were too lightly designed. http://www.thingiverse.com/thing:396403 Everything is beefed up. This fits the Imperial measurement version of the Spyda500. However, the cross…
To connect a paper roll holder to geartrack. Based on an existing heavy duty holder . 4 #12 ½'' screws and bolts needed.
Replacement lens cap for FLIR A700/A500/A300 fixed mount thermal camera with 17 mm (24°) lens.
This is an Iphone mount for the 5S in an Otterbox Commuter case. It will hold it, but do not count on it as 100% secure, use a strap to hold the phone to the carrier and consider putting cable ties through the bobbins. It attaches to this…
This allows the use of a Mean Well RT-50B power supply module in the A500 PSU enclosure without modification to the enclosure. Note that the 'pocketed' side goes towards the bottom enclosure half. The green power resistors are not…
Print the base plate with maximum strength. To get a good finish on the cover, print with low layer lines and iron the surface.
I recently repaired a Technics SA-400 receiver and, in the process, converted the lighting to LEDs. Since suitable BA9S LED bulbs are quite expensive (at least in my country) and installation in the spring-loaded sockets is very fiddly, I…
The "butter cover" of my fridge broke. The seller told me a new one would cost over 30€! So I printed a new one ;-)
Case → https://www.a1200.net/amiga-500-case/ For use with this micro hdmi to hdmi adapter → https://a.co/d/itEe6GM Print with PETG or ABS with a .4 nozzle. Female hdmi adapter snaps in but there is space to use double sided tape, I ended…
