Repro Bezel for Framework 16 Laptop 2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Even Further updated model For Framework 16 Bezel, Remade form the ground up for easier printing and editing.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a complete remake of a model I published earlier, the model I initially made had some issues, especially in the CAD file. This one was completely remade and should be easier to print and assemble, along with actually posting the .step and the .f3d. The CAD itself should be much cleaner, and I did my best to label things so other people can sort through it. There are also some other improvements in things like the magnet alignment process, where I made each notch relate to the type of metal strip that should be installed.
To properly assemble this model, you will need "0.15mm x 8mm Nickel Strip" and super glue.
When installing the covers (that may or may not function how I hope they will), place them in their area, then put the cover over and superglue it in.
When installing the metal for the magnets, cut it out using the ruler, then super glue under it, and align it in-between the two slots related to it.
There is still plenty of work to be done on this, and I will likely continue adding to this model (the number one thing in the works is an actual PDF showing how to assemble & build it). But If you found value in this model (especially considering it's taken so much of my time) I would appreciate if you would consider buying me a coffee @: buymeacoffee.com/MapouT
If this note is still here, that means I am yet to get access to a large enough printer and/or the proper materials to print this yet. I would want to wait to release this until I had, but I figured I would just put it out here in case someone wants to give it a shot regardless.