LayersFactory
Zgłoś model
1 / 3
Chery Amulet (A11/A15) Interior Door Handle Trim / Bezel — zdjęcie 1
1 / 3

Chery Amulet (A11/A15) Interior Door Handle Trim / Bezel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

prizrak

prizrak

@prizrak_4038128

Internal door handle trim for Chery Amulet. Precise OEM geometry. Perfect replacement for broken interior plastic parts.

Ocena
0 / 5
Polubienia
1
Pobrania
28
Wydruki
0
Wyświetlenia
120
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (0)Powiązane

Chery Amulet (A11/A15) Interior Door Handle Decorative Trim

Description:

3D replacement for the interior door handle trim of the Chery Amulet (A11/A15). Designed based on original OEM geometry to ensure a perfect snap-fit into the door card. Ideal for replacing cracked, scratched, or missing plastic interior elements.

Key Features:

  • Exact OEM Geometry: Matches original curves and mounting clips.

  • Restoration Ready: Replaces part numbers A11-6105147/48 or A15-6105147/48.

  • Durable Design: Optimized for 3D printing and daily use.

Compatibility & Mirroring:

The model is designed for a specific side. To get the trim for the opposite door, simply mirror the model in your slicer (X or Y axis).

  • Left Side: Standard model.

  • Right Side: Mirrored model.

Recommended Print Settings:

  • Material: PETG, ABS, or ASA (PLA is NOT recommended due to high car interior temperatures).

  • Layer Height: 0.15mm – 0.2mm.

  • Walls/Perimeters: 3–4 (for clip strength).

  • Infill: 20-30% (Gyroid).

  • Supports: Required (Tree/Organic supports recommended for clips).

  • Orientation: Print decorative face up for the best finish.

Post-Processing:

For a factory look: sand with 400-800 grit, apply plastic primer, and paint to match your interior (Matte Black/Grey).

This part has been tested on the Chery Amulet, but should also fit the following models (based on the same platform):Vortex Corda (full compatibility)Chery Flagcloud / Qiyun (A11/A15)Seat Toledo MK1 (1991-1999) - minor fitting may be required as the interiors are very similar.

Tagi

interiorautomotivedoorhandleamuleta15a11carrepaircherivortexcorda