Chery Amulet (A11/A15) Interior Door Handle Trim / Bezel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Internal door handle trim for Chery Amulet. Precise OEM geometry. Perfect replacement for broken interior plastic parts.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Chery Amulet (A11/A15) Interior Door Handle Decorative Trim
Description:
3D replacement for the interior door handle trim of the Chery Amulet (A11/A15). Designed based on original OEM geometry to ensure a perfect snap-fit into the door card. Ideal for replacing cracked, scratched, or missing plastic interior elements.
Key Features:
Exact OEM Geometry: Matches original curves and mounting clips.
Restoration Ready: Replaces part numbers
A11-6105147/48orA15-6105147/48.Durable Design: Optimized for 3D printing and daily use.
Compatibility & Mirroring:
The model is designed for a specific side. To get the trim for the opposite door, simply mirror the model in your slicer (X or Y axis).
Left Side: Standard model.
Right Side: Mirrored model.
Recommended Print Settings:
Material: PETG, ABS, or ASA (PLA is NOT recommended due to high car interior temperatures).
Layer Height: 0.15mm – 0.2mm.
Walls/Perimeters: 3–4 (for clip strength).
Infill: 20-30% (Gyroid).
Supports: Required (Tree/Organic supports recommended for clips).
Orientation: Print decorative face up for the best finish.
Post-Processing:
For a factory look: sand with 400-800 grit, apply plastic primer, and paint to match your interior (Matte Black/Grey).
This part has been tested on the Chery Amulet, but should also fit the following models (based on the same platform):Vortex Corda (full compatibility)Chery Flagcloud / Qiyun (A11/A15)Seat Toledo MK1 (1991-1999) - minor fitting may be required as the interiors are very similar.