Counting matching models…
2.5mm thick tpu phone case for a Samsung galaxy A15 with built in supports( to be cut or drilled away after printing). Case in photo was made with clear tpu with no top or bottom layers for faster printing, more flexibility, less used…
phone case, you can use different infills for different looks
I couldn't find a case that wasn't in TPU and my printer works better with PLA. I also wanted some more custom options. So, I completely redesigned this trying out multiple fastening methods and positions. Keeping this in 2 parts makes is…
An assorted group of keycaps. You have to print and decide which works better for your machine, but as always, I recommend the latest version. Print at the highest tolerances possible, as the keycap feet are rather small and need high…
In the 50's the Deutsche Bundesbahn started opperating the ETA150 battery powered railcars. https://nl.wikipedia.org/wiki/Baureihe_515 My goal is to my design 3D-print models of typical Dutch rolling stock. This German railcar does…
A mod for Apple Magic Trackpad 2 (A1535) to make it level with HHKB keyboard.
Use TPU filament. Let me know if it is good or not :) Dimensions: L: 163,1 mm W: 79,9 mm H: 11 mm
A snap-fit Samsung A15 phone case to protect the phone exterior. It is recommended to print the case on the back face. However, depending on the print setting used, the underside radius form (shape) nearest the print bed may need some…
This is a new redesign of my previous model for the A15. Slight adjustment to the dovetail placement and brand new PIP phone stand on bottom plate. Still hot swappable top and bottom components but NOT COMPATABLE with the previous…
I wanted to optimize airflow for the BD790i inside my Fractal Ridge case. Played around with different fans and found out that the big NF-A15 and - even better - the newer NF-A14x25r do fit nicely in that setup. The new one even without…
I designed this to raise the airport fan from being so close to desk and the scratching of the bottom of the Airport. A 2nd Airport also fits underneath if wanted to stack two or more. Put a rubber band around bottom of Airport to make…
Desk mount for Noctua NF-A15 fan
use flexible filiment on the main body for best results
Fits RB450, RB450G and RB850Gx2 routerboards. I used the sizes from the official documentation and remade for printing with plastic. Official documentation: https://routerboard.com/CA150 http://i.mt.lv/routerboard/files/RB450case.rar…
These fan covers are the same style as my standard hexagonal fan covers. These fit over the NA15 fan, includes 3 options, a low profile, a low profile with tabs, and a 5mm tall version. The screw hole spacing is 105mm.
Recently got into the IEM hobby and don't like how DAC hangs on its cable. The mount design idea is to keep it attached to the phone and keep buttons easily accessible on the side. As a MagSafe ring, I used this cheap pop socket from Ali…
Used for 12V Led automotive light bulb (single pin bulb) 1156 or BA15S. Connector are Female quick connector 6.3mm . Design to screw the bulb, it is very tight (be careful with the bulb) but i made it that way for my usage. If you want to…
Key for Yakima SKS lock with code A155 Based on Yakima control key design
I purchase these bulbs to use in my Tensor lamp, a type of light fixture that uses automotive bulbs with BA15s bayonet bases. They come in a crappy albeit compact package, so I created a nicer version that's only slightly bulkier but much…
Prvni tisk, :) Jedná se o kostku 15x15x15, písmena mají hloubku 1 mm a v rohu R 0,5 Test print for 15 mm cube, letters have 0,5 R on bottom.
Mounting holes for 140mm is 125mm x 125mm with these brackets If you're printing this on a older printer and need parts with larger tolerances. Contact me and I'll fix them Check out my instagram for more cool projects…
I have been using the previous design for a while now, and printed off several iterations. Though the PIP phone stand has been convenient, I noticed that as it was broke in, well . . . As you expect, the stand would just flop out. Not…
This is a pair of models I put together to join a set of Noctua NF-A15 fans for a hot air exhaust solution. Existing models like these [0] from JustinB [1] are not suitable for the NF-A15 due to the inset 120mm mounting holes on the…
Box for Jablotron relay board JB-110N and JA150N
Chery Amulet (A11/A15) Interior Door Handle Decorative Trim Description: 3D replacement for the interior door handle trim of the Chery Amulet (A11/A15). Designed based on original OEM geometry to ensure a perfect snap-fit into the door…
UPDATE: A raft is not require for this part. I erroneously indicated it was needed. But, it would be wise to use a 5mm-10mm brim to minimize or prevent corner lift. What's this for? This is a Gotek panel for Stephen Jones' epic Checkmate…
Included here are: - a blank - one with a 35mmx12mm hole suitable for one of those SD card re-locator devices so you can have easier access to the SD card. - one with the above 35mm x 12m hole & 2 slots to mount 2 panel mount USB type-A…
A PSE logo to be glued (with Epoxy or stronger glue) on a Samsung Galaxy A15 flexible cover (I don't have the reference of the cover). Tolerences are pretty large to allow easy assembling of different parts. Printed in PLA, glued together…
You will need one pair of Elfa Modular Clips at https://www.printables.com/model/60471-clip-module-pair-enforced-remix-for-elfa-pegboard Modeled around a Samsung A15 with a case on. Other phones may fit, as long as the width is 85mm wide…
I made this dust cover because the dust build-up in the cpu heatsink is annoying to clean. Also it provides cover for the fan blades. I am not sure if this is going to work so we'll see in a month. There is two files, the inner part and…
Knob for Moulinex QA150110 to replace original one. Grey insert glued to knob or you may use original. .step and .stl - files are available in attachments.
Les ampoules à culot BA15d (baïonnette de diamètre 15 mm à 2 contacts) deviennent rares, surtout en LED 12V. Pour remplacer une vieille ampoule halogène sur un spot spécifique, voici un réflecteur à monter sur une ampoule LED 5W, avec…
Hi! I designed this to replace the standard plastic back for the Spigen Tough Armor A15 case because, I wanted a design on the back, and the original came off to hard when I go to clean my phone. This replacement stays on during normal…
I need one direction of the light emitting from LED bulb in socket Ba15s. I can not find such bulb, so I made one. wires
This is the case for FIIO KA15 dac with belt clip. Supposed to be used together with default leather case. Clip part was taken from the original model. Box part was fully designed by me. It's not ideal, but it's like 10th printed…
A replacement headlamp stramp mount for the Nitecore HA15 UHE. Features: Strap holes for secure fitment Thicker design to prevent snapping Perforated rotation circles for more precise headlamp angle adjustment Additional space to fit…
A power supply holder for under the desk to get good cable managment or for other use. Material: PLA Infill: 25%
Samsung Galaxy A15 holder for Oiginal Prusa Enclosure. Phone is placed outside on the right door due hot environment inside of the enclosure during printing. M3 bolt is used to attach it through the original hole in the hinge. On the…
2.7 degree tapered mount for the Garmin GHA15
Český popis: Držák na Jablotron JA-151 je praktický držák se stříškou, který umožňuje bezpečné přišroubování k podkladu. Slouží zároveň jako podložka díky zadní straně o tloušťce cca 1 cm. Na zadní a levé straně držáku se nachází drážka…
I could not find a suitable model for this DAYTONA 1.5T Aluminum racing jack from Harbor Freight, so I made one. Disclaimer: This is not guaranteed to fit other models of Harbor Freight/Pittsburgh/Daytona jacks. This has only been tested…
Bracket for attaching a Noctua NF-A15 fan to a 420mm cooling radiator
Náhradní kryt světla kabiny vozidla A15 (hasičský speciál). S jeho aplikací je důrazně doporučen přechod na LED žárovku namísto klasické tepeplné baňky. Instrukce k tisku: průhledný materiál PETG/PLA (ASA) výška vrstvy 0.16 a níže (z…
### Description A replacement cup holder trim cover for the center console of Chery Amulet (A15) , also known as Vortex Corda or Chery Flagcloud . The original interior plastic parts in these cars often crack, get heavily scratched over…
What it is A two-part printable hood (backshell) for D-Sub connectors with solder cups, in three sizes: DE9 (often called DB9), DA15 and DB25. It fits on a connector you have already soldered. The two shells are held together by cable…
Picked up a used TV cart, and it was missing the caps for two of the leg pipes, so I designed this cap to fill the oval pipe ends. It's a tight friction fit, didn't want it to fall out, which means you'll likely need to tap it in with a…
In the 50's the Deutsche Bundesbahn started opperating the ETA150 battery powered railcars. https://nl.wikipedia.org/wiki/Baureihe_515 My goal is to my design 3D-print models of typical Dutch rolling stock. This German railcar does…
This is the case for FIIO KA15 dac with belt clip. Supposed to be used together with default leather case. Clip part was taken from the original model. Box part was fully designed by me. It's not ideal, but it's like 10th printed…
Chery Amulet (A11/A15) Interior Door Handle Decorative Trim Description: 3D replacement for the interior door handle trim of the Chery Amulet (A11/A15). Designed based on original OEM geometry to ensure a perfect snap-fit into the door…
This is a case designed for the b5s4 XA1541 Active - a device for reading and writing C64 / C128 and VIC-20 disks using an original Commodore floppy drive on a PC OnShape Model…
