Counting matching models…
GERMAN Kfz-Stromverteiler für Wago-Klemmen. Auf jeden Fall ist die Verwendung eines Stromabgreifers mit Sicherung NOTWENDIG! https://ebay.us/lLddsu(Werbung ) Die Leitungen müssen mit Kabelbindern am Zugschutz des Halters befestigt werden.…
It could be G-Class Fog light cover if I only knew dimensions.
Own a piece of revolutionary automotive design with this 3D printable model of the 1973 Citroën DS 23 IE. Presented under a draped cloth, this iconic French car is ready for a sophisticated reveal or as a distinguished display piece. The…
Design Description: This storage box is designed to hold the trailer wire and connector which is stored at the rear of a vehicle. I designed it to attach to the bottom of the bumper on my 3rd gen 4runner. It's designed to use 2x M5 bolts…
Step-by-step: Place the insert so that it protrudes from the head side of the pin. Put the pin into the hole. Push the insert until it is flush with the pin’s head. To remove the pin, push the insert inward — the pin will unlock and can…
I created this trim tool for myself at work, but figured why not share! Added a second version with filleted edges. My print settings: Layer Height: 0.12MM Infill: 100% Wall Loops: 5 Material: PETG No Supports needed Brim: Auto
This is a revival project inspired from Walnetto's cutting machine from 2018. The original version was made for house keys. Whilst it had a good basis I could see a lot of room for improvement. so here goes.. New improved clamping system…
Pro version! NOTE! - This revision requires an 8mm metal round bar at a max 169mm Length. This redesign greatly increases the accuracy of the key-cutting jig. allowing for a smooth glide and perfect alignment. This is a revival project…
A unique 3D printable creation — this Differential Gear Demo, Print in Place, Bevel Gears, Automotive STEM Education Model Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
A unique 3D printable creation — this Differential Gear Demo, Print in Place, Bevel Gears, Automotive STEM Education Model Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
I created this for use in my 1982 E350, as the custom nature of mine left the fuel tank inside the cabin. I moved it to in-between the frame rails, and needed somewhere to properly mount a fuel door. This may not be a full door, but is…
This model is part of a Fusion 360 practice project focused on designing curved, organic and complex geometry. The original piece is based on an automotive wheel cap, recreated from reference images. These types of designs, with smooth…
Pry tools - Opening Tool Flat - Smartphone - Notebook - Laptop - Automotive Resize to adjust dimensions All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you…
Made for: https://www.thingiverse.com/thing:4605309 I would recommend printing in ASA/ABS to withstand the heat in the car if you plan to leave it there, I wouldn't recommend PLA since it is too brittle for the flex needed to open and…
This is a quick reference (non-manifold/non-printable) 3D Scan of a Fram FF3614 oil filter for your own design purposes. The threaded side I didn't need for my project but scanned it for practice anyways. It didn't come out perfect…
Can be used on any car as desired, but was designed originally to replace the SKYACTIV Technology badge on Mazda MX-5 Miatas, which has a peg and thus can't be debadged without body filler. This is intended to be a modest no-frills badge…
This is a customizer for generating blanks to fill in unpopulated switch holes in most types of car and truck dashboards. It's kinda messy and not really cleaned up yet but it should work. Just take measurements of the hole you want to…
A typical automotive test light win a LED draws very little current. A standard test light with an incandescent bulb draws very little, typically about 250mA. This test light uses two 10om resistors wired in series, with a switched center…
Box for bolt down fuse used in car To be used with M5 bolt and 8mm M5 nut - max 14mm thread length With window to see if fuse has blown out Wrap the electrical tape around the nut holes on the box
These parts are similar to Lisle 37000 or Harbor Freight 63959 . Why buy a set when you can print the one you need? Fitting size is marked on the part. Some complaints about the HF version is that the opening is too narrow, so these parts…
I couldn't find a good case for my Megapro screwdrivers so I went into Fusion and modified the parametric box to fit my blank models of the Automotive and Precision screwdrivers. You'll need 6x M3x30mm screws/bolts or cut your own 3mm…
I created this simple ‘tool half’ to remove the Heater Hose Barb located at the vehicle firewall. The metal lines in the fire wall had a locking plastic hose barb sealed with an O-Ring. The O-rings were leaking. You take to ‘halves’ and…
Get ready to transform your car’s 12v socket into a versatile hub with this simple to print plug! Imagine effortlessly mounting your phone or GoPro, thanks to the 20mm ball on the end that perfectly fits RAM style ball mounts. Printing…
holds micro fuses so they aren't floating around your toolbox
This is a tool I made to assist in getting wires into the “loom” or wire wrapping in my car. There were tools available online but the cost seemed ridiculous so I designed one for myself. The tool is made in two pieces so they will need…
GERMAN Kfz-Stromverteiler für Wago-Klemmen. Auf jeden Fall ist die Verwendung eines Stromabgreifers mit Sicherung NOTWENDIG! https://ebay.us/lLddsu(Werbung ) Die Leitungen müssen mit Kabelbindern am Zugschutz des Halters befestigt werden.…
There are two types of clips, one to be printed in TPU, for easy removal and reuse. Another made to be printed in ABS or PETG that you can use an M4 screw as a central locking pin. São dois tipos de clipe, um para ser impresso em TPU,…
These are for TPU only, they don't work well with hard filaments because they are completely ridged if you don't print TPU. These are very robust and will fit most vehicles. I have a bunch of sizes and you can mix and match and just print…
Printed with standard settings and a Hilbert Curve top layer in PETG, ASA or ABS would probably be better as it is an outdoor application. Uses 4 x ¼-20 machine screws and nuts to mount.
things and stuff 3) 8 oz brush bottle spots 3) 36 ml bottle slots can also be used for desk top accessories, and as a business card holder.
It could be G-Class Fog light cover if I only knew dimensions.
I need something to hold together two heater hoses, but couldn't find anything aesthetic, so quickly made this one. It fits 24mm hoses. Added similar clip for 2x17mm hydraulic hose for automatic gearbox cooling. Print with ASA, ABS or CF…
Automotive usb connector house that use car vendor for HMI systems. Can glue gun standard solderable usb mini connector. Recomend print from ASA. After print cut litle piller that support overhang.
Needed some hooks for my SUV to hang plastic grocery bags and a trash bag. Print without supports on it's side in any material. I live in the area with hot summers so I use ASA.
This is a fuse holder for a set of automotive keys, a good way to ground a machine by removing its fuse making it harder to steal or have third parties access your machinery. or even keep your fuses handy in case of an emergency!
Own a piece of revolutionary automotive design with this 3D printable model of the 1973 Citroën DS 23 IE. Presented under a draped cloth, this iconic French car is ready for a sophisticated reveal or as a distinguished display piece. The…
Design Description: This storage box is designed to hold the trailer wire and connector which is stored at the rear of a vehicle. I designed it to attach to the bottom of the bumper on my 3rd gen 4runner. It's designed to use 2x M5 bolts…
If you're like me and broke the battery cover for the battery on this Craftsman LED mirror, I designed and printed a replacement. It's a little different than the original and has a hole all the way through for a large flathead…
This is a pen and business-card holder designed to look like a stack of three tires with a fourth leaned against it. I printed mine using the following print settings: 0.08mm layer height 5 walls 15% infill No supports
I created this to replace my dads air vent tabs for his KIA Sorento. The alternative was for the agents to replace the whole vent system. These work better than the original part - as the original is a 2 piece clip which is difficult to…
The fuse puller that came with my car (Astra J) broke the first time I used it so I re-created it in fusion. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament:…
Mount the printed clip on a 35 mm DIN rail, put an M5 nut into its gap and mount the relay socket with an M5 Allen bolt (M5x10 recommended, M5x12 max). Then fix the electrical connectors to the socket and install the relay.
Celebrate automotive history with iconic wheel-inspired coaster designs! This growing collection features meticulously crafted coasters based on legendary wheel designs from classic sports cars across multiple eras. Each design captures…
Show off your love for Audi with this modern, dual-tone keychain featuring the iconic four-ring logo. Designed for easy 3D printing, the model combines a bold black center with a crisp white frame, creating a stylish contrast that pops on…
Knockout adapter for https://www.amazon.com/gp/product/B07QBM12KS/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 Measures 42.2mm x 24.5mm. Fits Scion xB Gen 1, and other Toyota and Lexus models. May fit others?! The latest update…
This is a flat car silhouette inspired by the iconic BMW E36 , designed for easy PLA printing and clean final results. Perfect for: Garage walls Automotive workshops Home or office decor Gifts for BMW fans The model prints flat, requires…
Step-by-step: Place the insert so that it protrudes from the head side of the pin. Put the pin into the hole. Push the insert until it is flush with the pin’s head. To remove the pin, push the insert inward — the pin will unlock and can…
Seal press for automotive terminals. For 5 mm cavity automotive connectors. Easy insertion of the terminals without damage the seal. Free for personal use.
strain relief for Deutsch automotive connectors usable in back shell for corrugated tube for direct cables Various sizes available 12x7, 12x6, 12x5 and 10x7, 10x6, 10x5 mm Free only for personal use.
Attachment for 19mm hose with press fit side. Reverse engineered from a piece used on Renault Megane engine. Printed with PA-CF for extended temperature resistance.
This model should fit and protect most 12V car batteries' terminals. If not, please, download, remix, and re-publish!
This model should fit and protect most 12V car batteries' terminals. If not, please, have a look at the bigger model I posted on this site.
I created this trim tool for myself at work, but figured why not share! Added a second version with filleted edges. My print settings: Layer Height: 0.12MM Infill: 100% Wall Loops: 5 Material: PETG No Supports needed Brim: Auto
Quick and easy print for your original cookies.
This is a revival project inspired from Walnetto's cutting machine from 2018. The original version was made for house keys. Whilst it had a good basis I could see a lot of room for improvement. so here goes.. New improved clamping system…
Pro version! NOTE! - This revision requires an 8mm metal round bar at a max 169mm Length. This redesign greatly increases the accuracy of the key-cutting jig. allowing for a smooth glide and perfect alignment. This is a revival project…
A unique 3D printable creation — this Differential Gear Demo, Print in Place, Bevel Gears, Automotive STEM Education Model Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
A unique 3D printable creation — this Differential Gear Demo, Print in Place, Bevel Gears, Automotive STEM Education Model Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
Automotive Fluid Sample Card. So far nothing negative in useing PLA, though I recomend PETG or PCTG. With 3DFuel PCTG ive had the color run, not bad just annoying. PAs are good. If using PAs put a good brim. I use a 5mm brim and glue if…
I created this for use in my 1982 E350, as the custom nature of mine left the fuel tank inside the cabin. I moved it to in-between the frame rails, and needed somewhere to properly mount a fuel door. This may not be a full door, but is…
This model is part of a Fusion 360 practice project focused on designing curved, organic and complex geometry. The original piece is based on an automotive wheel cap, recreated from reference images. These types of designs, with smooth…
Basic trim removal tool set used commonly for working on vehicles. I printed mine in PETG PRO with extra top/bottom layers and extra walls to increase strength. I would recommend adding a brim so they don't come unstuck and using supports…
Holder for regular / standard size automotive blade fuse. I need to print it again so I took some time to I improve my previous remix. Shorter body, fuses can be inserted easier and as a bonus we can easily confirm if fuse is blown or…
A surface mount electrical box for common (to me) automotive LED side/back marker lights. Designed to be used with common European M16 membrane gasket or other M16 seals. This box does not meet any IP ratings without additional usecase…
2013-2016 Dodge Dart (II) has a rubber trim seal that latches to the hood. Popped the hood the other day to replace a faulty sensor and noticed about 20 of my trim clips had died... Dodge wants to sell you the whole trim with clips…
A replacement cover for the 12V automotive accessory plug (AKA cigarette lighter plug). Printed with Prusament PETG it had a good amount of springy-ness and fit snugly. Have not tested it with other materials. As I needed this for a plug…
-This is a set of to scale overly large automotive standard blade fuses. they can be printed on a ender 3 size build plate. made of two separate pieces, (Body and Legs), No AMS required, print each separately in your color choice and…
Automotive plastic clip for 1993 Geo Tracker door, may fit other vehicles. Holds the door handle in place. I've used a few days but lets see if it holds up. I printed PETG with no supports and flat side down. This might be problematic so…
I hate having to go scratch in a bag or box to find the fuses I need, so I decided it's time to organise. I will post some variations on this design as well. Category: Automotive
A sheath for a fill-rite nozzle that increases the diameter from 20mm to 24mm. This is intended for use when fueling a US diesel automobile which needs a 15/16" nozzle to open the fuel inlet restrictor. I printed mine using TPU. Good…
minor update and a few modifications to my bed wire management clamp (works best with 3/8" automotive wire loom) Mostly just added an angle upward slightly for more even flex and made the mount wrap around the loom instead of inside to…
Safety first, so if you are making any project with high current lead-acid battery you need to fuse it. This design is allow to use holder many times and not afraid about wire/terminal damage. distance beetwen mounting holes - 27mm. Bill…
Simple and ready to install model of plastic clip used to keep VW T4 headliner in pleace but I guess it could be used in different places and cars.
Customized the other pry tool holder design to fit my Tresalto pry tools perfectly. Print Settings Printer Brand: FlashForge Printer: Adventurer 4 Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament: Flashforge PLA Red Notes:…
This design is a 1:1 replica of the MTA mounting brackets. Only difference is that it's a friction fit (thanks to 3D-printing layers) rather than spring mounted. I designed both, so you can modify to fit your needs. Off course there's…
Hooks under trunk door on car or minivan and provides hole for paracord. Should work for most vehicles. Originally designed to secure back of canoe to top of vehicle. Parameterized Open SCAD file provided for fine tuning or extending the…
Automotive Differential Demonstration Model This is a 3:1 automotive open differential demonstration model. This type of differential can be found on rear wheel drive cars and allows each wheel to turn independent of one another. I…
I printed out of pla at 0.2mm layer height. When putting in the new scrivet try not to force it otherwise it will break. This scrivet is designed for an 8mm hole scale up or down as needed.
Designed to use these spade connectors: https://www.amazon.com/gp/product/B01MFEDLM4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Based off measurements from a Hyundai/Kia relay, but I don't see why other manufacturers would be a…
This is a wiring bracket intended to clean up the power connections to the battery in your vehicle. The bracket is designed to fit in the sliver of space available next to truck mounted batteries. It could also be used for tight spaces…
I made this ceiling light for my camper van. It's a minimalistic design and mounts in a 100mm hole. With 3 mounting hooks, it can be secured turning the (M5) screws 90 degrees. Hooks are made for ceiling panels of 5mm thickness. You have…
Automotive / Marine Fuse & Relay Block Printed for the engine bay of my truck, bracket will be self tapped to the inner fender. Relays/fuses not included. used tiny bit of RTV on the contacting edge of the "Panel.stl" Printed "cover.stl"…
This is a keychain requested on Reddit for user newbieITguy2. Print Settings Supports: No Notes: This is designed to be printed with 1st and all layers at .2mm and needs a filament color change after the 10th layer (2mm for the base, and…
Simple fire extinguisher (80mm) mount for a trailers or in a car. holes are for am M5 button head screw. I used PTEG as this is going in a trailer that has temps that will melt PLA.
Simple storage holder with lid for storing old-school car glass fuses in your glovebox. Designed to store 3AG (32 x 6.3mm) fuses. Version 1 is rectangular box with friction fit lid. Models available for 6x or 8x fuses Version 2 is a…
I designed this for a friend that happens to be a car mechanic with own business, to have something on his desk to put the business cards into :-) Stand includes extra front badge to include your own Logo (possible to multicolour-print…
Automotive Themed Phone and Watch Charger made for MagSafe base and Apple Watch charger in piston.
A holder to store the MEGAPRO automotive ratcheting screwdriver. I just used a command strip to attach to to a piece of wood to organize tools. Looks like it should hold other megapro ratcheting screwdrivers but I cant confirm.
3/8 Automotive air fitting holder to hold tools such as a needle scaler, air ratchet, blow gun, etc. I made it into a bar to be attached to whatever material you choose. I attached mine to heavy-duty magnets to be moveable from my toolbox…
Gridfinity Fuse Holder Small fuse holder for up to 6 fuses. Fusion360 File included to mix sizes to your own requirements. Other models Check out my other models https://www.printables.com/@Micah_754861 Category: Organization
Printed in ABS for use in automotive Print it as it is horizontaly for strenght Fits 7 - 8 mm holes Is better tu use a rubber oring before assembly and to eliminate any play 0.2 mm layer hight 100% infill use supports Use brim for…
This can be printed without supports. It holds a 6x9 automotive speaker, and I use it with an Aiyima tpa3116 board to have excellent sound on my desktop.…
This is an accurate model of a large 12v momentary switch/button, created to assist with the design of racecar switchgear. The model includes both a “standard” and a “fully functional” version. The standard is a simpler design that does…
