1 / 3
push in rivet, pin, clip automotive 6, 7, 8, 10 mm — image 1
1 / 3

push in rivet, pin, clip automotive 6, 7, 8, 10 mm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

push in rivet, pin, clip automotive for holes: 6mm , 7mm, 8mm, 10mm

Rating
5 / 5
Likes
327
Downloads
1,263
Makes
5
Views
3,525
Reviews
6

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Step-by-step:

  1. Place the insert so that it protrudes from the head side of the pin.

  2. Put the pin into the hole.

  3. Push the insert until it is flush with the pin’s head.

  4. To remove the pin, push the insert inward — the pin will unlock and can be withdrawn.

Printing notes:

  • Print at least two parts at a time to improve cooling.

  • For the inserts, I suggest using a brim.

  • Use filament with good layer adhesion.

  • For indor and oudor stuff PLA is good enough.

  • For higher temperature resistance, I recomend to print with PET, PC, PA or BAMBU TPU for ams.